• Economic and Environmental Geology
• /
• v.18 no.2
• /
• pp.93-105
• /
• 1985

Whether a skarn deposit in carbonate host occurs in contact with certain igneous mass or not has been a general criterion in identifying the igneous rock that genetically relates to the skarn deposit. It is well known, however, that there are many skarn deposits which are not close to any given igneous contact but are far away from the contact. In this paper the reason why such deposits can be formed at a distance from the contact as mentioned is expressed based on the concept that skarn deposits and related igneous rocks are genetically connected at depth where ore-forming fluids emanate from magma and are removed upwards; the movement of ore-forming fluids separated from magma at any depth may have a tendency to infiltrate upward in bulk rather than to diffuse laterally; the paths of magma and cogenetic ore-forming fluids may be identical at lower depths but the latter can be diverted from the former with upward movement so that the positions of the skarn deposits which resulted from the ore-forming fludis at upper levels can be distant from the igneous contacts on a given horizontal section. Statistics indicate that the majority of exoskarns are found at distances up to 800 meters or rarely up to 3,000 meters from igneous contacts and endoskarns up to 600 meters or more. Numerous case studies of skarn deposits in various parts of the world support the above reasoning indicating a general downward convergency of skarn orebodies and related igneous masses with depth. A typical example of this situation is well demonstrated at the Keumseong molybdenum deposit, which is apart from the Jecheon granite on the surface but gets closer to the granite body with depth and finally is intertongued with the granite apophyses in its root zone. Another case for skarn deposit not associated with igneous contact either laterally or vertically but with a deep-seated distal igneous mass is the Sangdong scheelite deposit; 700 meters below the scheelite orebody a blind pluton of muscovite granite, which intruded into the Precambrian crystalline schist, has been recently discovered by deep drilling.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.9
• /
• pp.12-26
• /
• 2004

A new treatment of cell-interface flux in AUSM-type methods is introduced to reduce the numerical dissipation. Through analysis of TVD limiters, a criterion for the more accurate prediction of cell-interface state is found out and M-AUSMPW+ is developed by determining the transferred property newly and appropriately within the criterion. The superiority of M-AUSMPW+ is clearly revealed in multi-dimensional flow problems. It can eliminate numerical dissipation effectively in a non-flow aligned grid system. As a result, M-AUSMPW+ is shown to be much more accurate and effective than other previous schemes in multi-dimensional problems. Through a stationary contact discontinuity, a vortex flow, a shock wave/boundary layer interactions and viscous shock tube problems, it is verified that accuracy of M-AUSMPW+ is improved.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.12
• /
• pp.94-101
• /
• 2009

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. The sleeve spring type damper is one of the preventive measures for reducing the torsional vibration. In this study, 2-roll bending process was proposed to manufacture sleeve spring; The program to calculate the initial radius including springback effect was developed and the FEA method to analyze elasto-plastic problem was verified through analysis of 90 degree bending process. The elasto-plastic analysis of 2-roll bending process was carried out by the FEA method verified to set a new criterion, and the new process design parameter(contact angle) in the 2-roll bending process was proposed.

• International Journal of Highway Engineering
• /
• v.18 no.2
• /
• pp.51-60
• /
• 2016

PURPOSES : The applicability of the mechanics-based similarity concept (suggested by Feng et al.) for determining scaled variables, including length and load, via laboratory-scale tests and discrete element analysis, was evaluated. METHODS: Several studies on the similarity concept were reviewed. The exact scaling approach, a similarity concept described by Feng, was applied in order to determine an analytical solution of a free-falling ball. This solution can be considered one of the simplest conditions for discrete element analysis. RESULTS : The results revealed that 1) the exact scaling approach can be used to determine the scale of variables in laboratory tests and numerical analysis, 2) applying only a scale factor, via the exact scaling approach, is inadequate for the error-free replacement of small particles by large ones during discrete element analysis, 3) the level of continuity of flowable materials such as SCC and cement mortar seems to be an important criterion for evaluating the applicability of the similarity concept, and 4) additional conditions, such as the kinetics of particle, contact model, and geometry, must be taken into consideration to achieve the maximum radius of replacement particles during discrete element analysis. CONCLUSIONS : The concept of similarity is a convenient tool to evaluate the correspondence of scaled laboratory test or numerical analysis to physical condition. However, to achieve excellent correspondence, additional factors, such as the kinetics of particles, contact model, and geometry, must be taken into consideration.

• Geomechanics and Engineering
• /
• v.35 no.2
• /
• pp.209-219
• /
• 2023

This paper presents numerical investigations into the particle crushing effect on the shear properties of gravel under direct shear condition. A novel particle crushing model was developed based on the octahedral shear stress criterion and fragment replacement method. A series of direct shear tests were carried out on unbreakable particles and breakable particles with different strengths. The evolutions of the particle crushing, shear strength, volumetric strain behavior, and contact force fabric during shearing were analyzed. It was observed that the number of crushed particles increased with the increase of the shear displacement and axial pressure and decreased with the particle strength increasing. Moreover, the shear strength and volume dilatancy were obviously decreased with particle crushing. The shear displacement of particles starting to crush was close to that corresponding to the peak shear stress got. Besides, the shear-hardening behavior was obviously affected by the number of crushed particles. A microanalysis showed that due to particle crushing, the contact forces and anisotropy decreased. The mechanism of the particle crushing effect on the shear strength was further clarified in terms of the particle friction and interlock.

• Corrosion Science and Technology
• /
• v.23 no.1
• /
• pp.1-10
• /
• 2024

Oil well casing leak is caused by contact of casing outer surface with formation electrolyte. It is usually associated with an aquifer with a high salt content or absence of a cement ring behind the casing. The only way to reduce external casing corrosion is through cathodic protection. Through cathodic polarization of casing structure, electron content in crystal lattice and electron density will increase, leading to a potential shift towards the cathodic region. At Tatneft enterprises, cathodic protection is carried out according to cluster and individual schemes. The main criterion for cathodic protection is the size of protective current. For a casing, the protective current is considered sufficient if measurements with a two-contact probe show that the electric current directed to the casing has eliminated all anode sites. To determine the value of required protective current, all methods are considered in this work. In addition, an analysis of all methods used to determine the minimum protective current of the casing is provided. Results show that the method of measuring potential drop along casing is one of the most reliable methods for determining the value of protective current.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.181-193
• /
• 2000

The purpose of this study was to establish the marketing strategy, that strengthens the brand royalty of their own in apparel industry and that can induce consumer's brand switching against competitive brand. This might be done by suggesting influencing factors on the brand switching for fashion goods. This study was classified into theoretical and experimental study Experimental study was done, using the survey to prove the models for consumers' responses to brand switching by the theoretical study. The survey was conducted through two preliminary questionnaires. It was used as a criterion to prove the validity of the main survey and analyse the reliability. It analyzed at last five hundred ninety-two women in the age of twenty to thirty years odd who live in Seoul and the suburban of Seoul. Followings are the summary of the results revealed through the experimental study. First, brand switching behavior of consumers far formal dress was attributed to two extremes the inner motivation of variety seeking tendency and communication contact, complex variety seeking group, true variety seeking group, derived variety seeking group, and variety avoiding group. Second, the structure of low dimension related fashion according to factor analysis, which affects brand switching, was composed to involvement in 5-dimension, information search in 3-dimension. Based on the results of this study the types of brand switching in fashion goods can be classified by the variety seeking tendency. as inner motivation, and level of contact communication as a outside stimuli. In addition this study showed a correlation among the factors for brand switching related to variables of fashion.

• Computers and Concrete
• /
• v.20 no.3
• /
• pp.319-327
• /
• 2017

Studying the structural behavior of prestressed segmented girders is quite important due to the large use this type of solution in viaducts and bridges. Thus, this work presents a nonlinear three-dimensional structural analysis of an externally prestressed segmented concrete girder through the Finite Element Method (FEM), using a customized ANSYS platform, version 14.5. Aiming the minimization of the computational effort by using the lowest number of finite elements, a new viscoelastoplastic material model has been implemented for the structural concrete with the UPF customization tool of ANSYS, adding new subroutines, written in FORTRAN programming language, to the main program. This model takes into consideration the cracking of concrete in its formulation, being based on fib Model Code 2010, which uses Ottosen rupture surface as the rupture criterion. By implementing this new material model, it was possible to use the three-dimensional 20-node quadratic element SOLID186 to model the concrete. Upon validation of the model, an externally prestressed segmented box concrete girder that was originally lab tested by Aparicio et al. (2002) has been computationally simulated. In the discretization of the structure, in addition to element SOLID186 for the concrete, unidimensional element LINK180 has been used to model the prestressing tendons, as well as contact elements CONTA174 and TARGE170 to simulate the dry joints along the segmented girder. Stresses in the concrete and in the prestressing tendons are assessed, as well as joint openings and load versus deflection diagrams. A comparison between numerical and experimental data is also presented, showing a good agreement.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.6
• /
• pp.99-105
• /
• 2008

Resent, requirement of residents is socially increasing for apartment. Apartment housing os developed to reduce the housing shortage caused by urbanism after industrialization in Korea. The Purpose of this study is to analyze the casual relationships of housing satisfaction, living Life-Cycle on all residents of apartment housing. This study develops a theoretical model based on the previous studies, and testifies the hypothesis through analyzing to questionnaires form 643 residents of apartment housing. Then, the data were analyzed by SPSS12+ program package in terms of frequency, correlation analysis and multiple regression analysis. The results of this study is summarized as the followings: The perceived quality had positive effects on the factor of living Life-Cycle and housing satisfaction. Finding of this study can provide valuable information for a criterion of decision making to consumer and a marketing strategy of housing construction company.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.608-611
• /
• 2002

In GMAW(Gas Metal Arc Welding) process, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWB (contact- tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using negro-fuzzy algorithm. Neural networks was applied to design FL(fuzzy logic). The parameters of input membership functions and those of consequence functions in FL were tuned through the method of learning by backpropagation algorithm. Bead geometry could be reasoned from welding current, arc voltage, travel speed on FL using the results learned by neural networks.