• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.511-514
• /
• 2011

The impact of greenhouse gas (GHG) emissions is the global issue over the world. Korean government has presented various policies to induce GHG reduction for the industries with high energy consumption such as power generation and chemistry. Construction sector has produced a large amount of GHG emissions resulted in the energy consumption of heavy equipments and the use of materials. This study aims to suggest the QA (Quality Assurance) and QC (Quality Control) method to identify and quantify the GHG emissions released from heavy equipments in the railroad construction sector. Generally, the accuracy and reliability of GHG inventory is dependent on the data collection. Therefore, it is necessary to mange the detailed statements for the fuel consumption of heavy equipments and the quantity of work in the field. Also, the breakdown of GHG emission sources should be recorded from the design step of railroad infrastructures. Based on these data, the GHG reduction technologies and polices can be applied in railroad construction sector.

• Journal of Advanced Marine Engineering and Technology
• /
• v.16 no.4
• /
• pp.60-77
• /
• 1992

The effects of exhaust gas recirculation(EGR) on the characteristics of exhaust emissions and specific fuel consumption have been investigated using an eight-cylinder, four cycle, direct injection diesel engine operating at several loads and speeds. The experiments in this study are conducted on the fixed fuel injection timing of $38^{\circ}$ BTDC regardless of experimental conditions. In conclusion, it is found that $NO_{x}$ emission is markedly reduced with the drop of burnt gas temperature at high speeds and loads especially as the EGR rate increases, while the soot particulate rises with EGR rate and load at a given engine speed, especially high loads. The reduction of exhaust emissions within the Korea heavy duty diesel engine emission standards can be roughly achieved by the optimal EGR rate without degarding the specific fuel consumption, based on the correlations between exhaust emissions.

• Korean Journal of Agricultural Science
• /
• v.47 no.4
• /
• pp.1135-1145
• /
• 2020

The purpose of this study was to compare and analyze the emissions of SOx and NH3 for a 78 kW class agricultural tractor during agricultural operations. A real-time monitoring system was constructed for measuring the load data. The field test was conducted during plow and rotary tillage. The working conditions were selected with the transmission gears in M3 Low and M2 High for the plow tillage and L3 High and L3 Low for the rotary tillage. The engine torque and fuel consumption were measured using controller area network (CAN) communication, and the emissions of SOx and NH3 were calculated based on the fuel consumption. As a result of the field tests, the engine torque was higher for the plow tillage than for the rotary tillage. As the gear stage was increased, the engine torque became higher. The emissions of SOx and NH3 were higher for the plow tillage than for the rotary tillage because the fuel consumption increased. Moreover, the emissions of SOx and NH3 tended to be more distributed for the rotary tillage than for the plow tillage. To develop an emission factor for agricultural machinery, it is important to measure reliable emission data during agricultural operations. In a future study, we will collect various emission data using a portable emission measurement system during agricultural operations.

• International conference on construction engineering and project management
• /
• 2017.10a
• /
• pp.14-23
• /
• 2017

In high-density high-rise cities such as Hong Kong, buildings account for nearly 90% of energy consumption and 61% of carbon emissions. Therefore, it is important to study the design of buildings, especially high-rise buildings, to achieve lower carbon emissions in the city. The carbon emissions of a building consist of embodied carbon from the production of construction materials and operational carbon from energy consumption during daily operation (e.g., air-conditioning and lighting). An integrated analysis of both types of carbon emissions can strengthen the design of low carbon buildings, but most of the previous studies concentrated mainly on either embodied or operational carbon. Therefore, the primary objective of this study is to develop a holistic methodology framework considering both embodied and operational carbon, in order to enhance the sustainable design of low carbon high-rise buildings. The framework will be based on the building information modeling (BIM) technology because BIM can be integrated with simulation systems and digital models of different disciplines, thereby enabling a holistic design and assessment of low carbon buildings. Structural analysis program is first coupled with BIM to validate the structural performance of a building design. The amounts of construction materials and embodied carbon are then quantified by a BIM-based program using the Dynamo programming interface. Operational carbon is quantified by energy simulation software based on the green building extensible Markup Language (gbXML) file from BIM. Computational fluid dynamics (CFD) will be applied to analyze the ambient wind effect on indoor temperature and operational carbon. The BIM-based framework serves as a decision support tool to compare and explore more environmentally-sustainable design options to help reduce the carbon emissions in buildings.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.3288-3293
• /
• 2007

Compressed natural gas has good potential for alternative vehicle fuel due to its economical and clean characteristics. However, the composition of natural gas based on production location is known to affect performance and emissions of CNG engine. Thus, the objective of this paper is to clarify the effect of fuel composition on combustion and emissions of CNG engine. This paper presents combustion characteristics obtained from running a 2.5L, 4-cylinder CNG engine retrofitted IDI diesel engine with engine dynamometer. BSFC, emissions, fuel consumption and combustion pressure were measured under steady state operating conditions especially at partial load for CNG engine. Based on the experimental results, we found that CNG composition affects engine performance, fuel conversion efficiency and burning rate.

• Advances in aircraft and spacecraft science
• /
• v.1 no.3
• /
• pp.311-330
• /
• 2014

Environmental impact of aircraft emissions can be addressed in two ways. Air quality impact occurs during landings and takeoffs while in-flight impact during climbs and cruises influences climate change, ozone and UV-radiation. The aim of this paper is to investigate airports related local emissions and fuel consumption (FC). It gives flight path optimization model linked to a dispersion model as well as numerical methods. Operational factors are considered and the cost function integrates objectives taking into account FC and induced pollutant concentrations. We have compared pollutants emitted and their reduction during LTO cycles, optimized flight path and with analysis by Dopelheuer. Pollutants appearing from incomplete and complete combustion processes have been discussed. Because of calculation difficulties, no assessment has been made for the soot, $H_2O$ and $PM_{2.5}$. In addition, because of the low reliability of models quantifying pollutant emissions of the APU, an empirical evaluation has been done. This is based on Benson's fuel flow method. A new model, giving FC and predicting the in-flight emissions, has been developed. It fits with the Boeing FC model. We confirm that FC can be reduced by 3% for takeoffs and 27% for landings. This contributes to analyze the intelligent fuel gauge computing the in-flight fuel flow. Further research is needed to define the role of $NO_x$ which is emitted during the combustion process derived from the ambient air, not the fuel. Models are needed for analyzing the effects of fleet composition and engine combinations on emission factors and fuel flow assessment.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.193-195
• /
• 2011

Nowadays, climatic environment change has become a major issue in the world. This causes major emissions of carbon dioxide industries steel industry, thermal power industry, cement industry is essential in the reduction of carbon dioxide, which is based on total carbon dioxide emissions account for most of the construction industry in an effort to minimize the environmental load is needed. accordingly, through case studies, It can be induce the selection to minimize environmental load by comparing the output of quantitative energy consumption and carbon dioxide emissions per constructional methods. As a result of this study, RC Structure was less environmental load than SC structure.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.4
• /
• pp.356-367
• /
• 2015

A consumption based study on the carbon dioxide ($CO_2$) emission change due to the changes in the bovine meat consumption behavior in Korea was carried out. It was found that if the consumption of bovine meat be reduced by half, the reduction amount of $CO_2$ emissions be over 0.8 $MtCO_2e$ in all senarios in 2023. This amount is equivalent to over 50% of the greenhouse gases (GHGs) emission reduction target in agriculture and forestry, and fishery, a significant reduction. It was also found that the $CO_2$ emission reduction amount in consumption-based approach was the largest when the consumption of the imported bovine meat be reduced, though the difference was not that large.

• Journal of Climate Change Research
• /
• v.5 no.4
• /
• pp.301-311
• /
• 2014

In this study, we estimated the amount of fuel used fishing boats of individual based on the results of survey of the activity data such as operations and activities specification of fishing boats in Korea. Based on the classification system of the domestic fishing boat, and to estimate average fuel consumption and the greenhouse gas emissions, showed emission factors per fishing boat. This was suggested to be able to apply the registration data area in the future, and estimates the emissions of greenhouse gases. Based on these results, it tries to provide the basic data that can be used when you want to create a local government measures to reduce scenario in the future.

• Membrane and Water Treatment
• /
• v.11 no.3
• /
• pp.173-177
• /
• 2020

Wastewater treatment plants (WWTPs) have been recognized as one of the significant greenhouse gas (GHG) generators, due to the complex biochemical reaction and huge consumption of energy and materials. Recently, WWTPs have been built underground and they will be confronted with the challenges of mitigating GHG emissions and improving the quality of treated wastewater. Here, we focus on estimating GHG emissions to set up effective management plans for a WWTP built underground. First, we apply the process-based life cycle assessment (LCA) with an inventory database of the underground WWTP for a case study. Then, we identify significant factors affecting GHG emissions during service life using sensitivity analysis and suggest the proper tactics that could properly reduce GHG emissions from the WWTP.