• Journal of Construction Engineering and Project Management
• /
• v.3 no.3
• /
• pp.10-16
• /
• 2013

The annual expenditure on diesel oil and heavy oil in the construction sector is the second largest among all industrial sectors. According to the greenhouse reduction scheme of Korean Government, construction sector targeted 7.1% reduction by 2020. Although this target is not higher than other industrial sectors, it is not easy to achieve the reduction target without radical advance in technology, which cannot be expected to happen soon, considering the conservative characteristics of construction industry. Most researches on environmental issues focus on the issues related to energy saving matters during material production stage or maintenance stage, such as heating and insulation, and few deal with the issues directly related to the energy use in the construction sites. This research regards the operation of equipment for the on-site construction processes as a system and attempts to model the energy use processes related to the activities in construction sites, and provides simulation results of earth excavation and hauling processes. The result of this research is expected to aid construction planners estimating the time-based patterns of energy use and assessing greenhouse gas emission and to help selecting more energy efficient alternatives at the planning stage.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.252-252
• /
• 2008

The microhotplates consisting of a Pt-ased heating element on AlN/poly 3C-SiC layers were fabricated. The microhotplate has a $600{\mu}m{\times}600{\mu}m$ square shaped membrane which made of $1{\mu}m$ thick ploycrystalline 3C-SiC suspended by four legs. 3C-SiC is known for excellent chemical durability, mechanical strength and sustaining of high temperature. The membrane is fabricated by surface micromachining using oxidized Si sacrificial layer. The Pt thin film is used for heating material and resist temperature sensor. The fabrication methodology allows intergration of an array of heating material and resist temperature detector. For reasons of a short response time and a high sensitivity a uniform temperature profile is desired. The dissipation of microhotplate was examined by a IR thermoviewer and the power consumption was measured. Measured and simulated results are compared and analyzed. Thermal characterization of the microhotplates shows that significant reduction in power consumption was achieved using suspended structure.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.13-14
• /
• 2005

Multi-dimensional combustion analysis and experiment has been carried out to investigate the effects of the injector nozzle hole diameter and number on the NOx formation and fuel consumption in HYUNDAI HiMSEN engine. The behavior of spray and combustion phenomena in diesel engine was examined by FIRE code. Wave breakup and Zeldovich models were adopted to describe the atomization characteristics and NOx formation. Wallfilm model suggested by Mundo, et al. and auto-ignition model suggested by Theobald and Cheng were adopted to investigate the spray-wall interaction characteristics and ignition delay. The information of spray angle and spray tip penetration length was extracted from fuel spray visualization experiment and the fuel injection rate profile was extracted from fuel injection system experiment as an input and verification data for the combustion analysis. Next, the nine different nozzle configurations were simulated to evaluate the effect of injector hole diameter and number on the NOx formation and fuel consumption.

• Journal of the Korean Solar Energy Society
• /
• v.29 no.5
• /
• pp.8-13
• /
• 2009

Feasibilities of the application of a micro gas turbine cogeneration system to a large size hospital building are studied by estimating energy demands and supplies. The energy demand for electricity is estimated by surveying and sorting the consumption records for various equipment and devices. The cooling heating, and hot water demands are further refined with TRNSYS and ESP-r to generate load profiles for the subsequent operation simulations. The operation of the suggested cogeneration system in conjunction with the load data is simulated for a time span of a year to predict energy consumption and gain profile. The simulation revealed that the thermal efficiency of the gas turbine is about 30% and it supplies 60% of the electricity required by the building. The recovered heat can meet 56% of total heating load and 67% of cooling, and the combined efficiency reaches up to 70%.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.2
• /
• pp.121-126
• /
• 2008

In a previous study, a mulberry fruit extract(MFE) supplement exhibited anti-inflammatory activity and improved serum lipid profiles in arthritic rats. The objective of this study was to determine whether dietary MFE could ameliorate inflammatory parameters and serum lipid levels in humans. Twenty-six middle-aged subjects(mean body mass index=27 $kg/m^2$) consumed MFE(100 $m{\ell}/day)$ after lunch for 4 wks. Anthropometric measurements, serum oxidative stress markers and serum lipid profile analyses were performed at baseline and then at 4 wk following the study. There were no significant differences in anthropometric measurements, including BMI, WHR, and body fat composition. After the 4 wk-intervention, serum levels of C-reactive protein(CRP), ferric-reducing ability of plasma(FRAP), serum triglyceride(TG) and LDL-cholesterol had significantly decreased(p<0.05), whereas serum levels of HDL-cholesterol significantly(p<0.05) increased. These findings suggest the consumption of mulberry extract may be protective against inflammation and the atherosclerotic state in elderly obese men at high risk for cardiovascular disease(CVD).

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.287-293
• /
• 2013

The annual expenditure on diesel oil and heavy oil in the construction sector is the second largest among all industrial sectors. According to the greenhouse reduction scheme of Korean Government, construction sector targeted 7.1% reduction by 2020. Although this target is not higher than other industrial sectors, it is not easy to achieve the reduction target without radical advance in technology, which cannot be expected to happen soon, considering the conservative characteristics of construction industry. Most researches on environmental issues focus on the issues related to energy saving matters during material production stage or maintenance stage, such as heating and insulation, and few deal with the issues directly related to the energy use in the construction sites. This research regards the operation of equipment for the on-site construction processes as a system and attempts to model the energy use processes related to the activities in construction sites, and provides simulation results of earth excavation and hauling processes. The result of this research is expected to aid construction planners estimating the time-based patterns of energy use and assessing greenhouse gas emission and to help selecting more energy efficient alternatives at the planning stage.

• International Journal of Computer Science & Network Security
• /
• v.24 no.4
• /
• pp.87-106
• /
• 2024

Vehicle-to-Home (V2H) and Home Centralized Photovoltaic (HCPV) systems can address various energy storage issues and enhance demand response programs. Renewable energy, such as solar energy and wind turbines, address the energy gap. However, no energy management system is currently available to regulate the uncertainty of renewable energy sources, electric vehicles, and appliance consumption within a smart microgrid. Therefore, this study investigated the impact of solar photovoltaic (PV) panels, electric vehicles, and Micro-Grid (MG) storage on maximum solar radiation hours. Several Deep Learning (DL) algorithms were applied to account for the uncertainty. Moreover, a Reinforcement Learning HCPV (RL-HCPV) algorithm was created for efficient real-time energy scheduling decisions. The proposed algorithm managed the energy demand between PV solar energy generation and vehicle energy storage. RL-HCPV was modeled according to several constraints to meet household electricity demands in sunny and cloudy weather. Simulations demonstrated how the proposed RL-HCPV system could efficiently handle the demand response and how V2H can help to smooth the appliance load profile and reduce power consumption costs with sustainable power generation. The results demonstrated the advantages of utilizing RL and V2H as potential storage technology for smart buildings.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.29-38
• /
• 2015

The Energy Storage System stores electricity for later use. This system can store electricity from legacy electric power systems or renewable energy systems into a battery device when demand is low. When there is high electricity demand, it uses the electricity previously stored and enables efficient energy usage and stable operation of the electric power system. It increases the energy usage efficiency, stabilizes the power supply system, and increases the utilization of renewable energy. The recent increase in the global interest for efficient energy consumption has increased the need for an energy storage system that can satisfy both the consumers' demand for stable power supply and the suppliers' demand for power demand normalization. In general, an energy storage system consists of a Power Conditioning System, a Battery Management System, a battery cell and peripheral devices. The specifications of the subsystems that form the energy storage system are manufacturer dependent. Since the core component interfaces are not standardized, there are difficulties in forming and operating the energy storage system. In this paper, the design of the profile structure for energy storage system and realization of private profiling system for energy storage system is presented. The profiling system accommodates diverse component settings that are manufacturer dependent and information needed for effective operation. The settings and operation information of various PCSs, BMSs, battery cells, and other peripheral device are analyzed to define profile specification and structure. A profile adapter software that can be applied to energy storage system is designed and implemented. The profiles for energy storage system generated by the profile authoring tool consist of a settings profile and operation profile. Setting profile consists of configuration information for energy device what composes energy saving system. To be more specific, setting profile has three parts of category as information for electric control module, sub system, and interface for communication between electric devices. Operation profile includes information in relation to the method in which controls Energy Storage system. The profiles are based on standard XML specification to accommodate future extensions. The profile system has been verified by applying it to an energy storage system and testing charge and discharge operations.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.9
• /
• pp.1310-1319
• /
• 2005

This experiment was conducted to determine the effects of cage density (CD) and humate supplementation (HS) on laying performance, metabolic profile, and egg quality during the peak production period in hens. Lohman layers (n = 180, 46 wks of age) were blocked according to the location of cages and then allocated randomly to two levels of CD (4 or 6 hens per cage or 540 vs. 360 $cm^2$/hen) and three levels of HS (0, 0.15, and 0.30%). Egg production (EP) and feed consumption (FC) were measured daily; egg weight was measured bi-weekly; and BW was measured before and after the experiment. Blood and additional egg samples were obtained at the end of the experiment for determination of metabolic profile and egg quality. The data were analyzed using two-way ANOVA as repeated measures. Except for FC, CD did not affect laying performance parameters. Hens placed in high-density cages had lower FC than hens placed in normal-density cages. Increasing HS level linearly increased FC, EP, and feed conversion ratio (FCR). There was a CD by HS interaction effect on FC and EP. Hens placed in high-density cages had greater serum glucose, total protein, albumin, globulin, Ca, and P concentrations and tended to have greater serum corticosterone concentration than hens placed in normaldensity cages. Increasing HS level linearly increased serum glucose, total protein, albumin, globulin, creatine, and Ca concentrations and linearly decreased serum triglyceride and very low-density lipoprotein concentrations. There was a CD by HS interaction effect on serum glucose and albumin concentrations. There were no alterations in egg quality parameters in response to increasing CD. Albumen index and Haugh unit decreased linearly and other egg quality parameters did not change as HS level increased. In conclusion, increased caging density adversely affected metabolic profile, despite insignificantly deteriorating laying performance. Moreover, benefits from humate supplementation seem to be more noteworthy for hens housed in stressing conditions than for hens housed in standard conditions.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.22 no.5
• /
• pp.357-367
• /
• 2022

Background: Low-dose dexmedetomidine may be a suitable alternative to opioids for pediatric ambulatory procedures under general anesthesia (GA). However, the recovery profile remains unclear. Herein, we aimed to evaluate the effects of low-dose dexmedetomidine on the recovery profile of children. Methods: Seventy-two children undergoing ambulatory oral rehabilitation under GA were randomly and equally distributed into two groups (D and F). Group D received an infusion of dexmedetomidine 0.25 ㎍/kg for 4 min for induction, followed by maintenance of 0.4 ㎍/kg/h. Group F received an infusion of fentanyl 1 ㎍/kg over 4 min for induction, followed by maintenance at 1 ㎍/kg/h. The primary outcome was the extubation time. The secondary outcomes were awakening time, end-tidal sevoflurane (ET-Sevo) requirement, change in hemodynamic parameters, Richmond Agitation-Sedation Scale (RASS), Children's Hospital of Eastern Ontario pain scale (CHEOPS) score, length of PACU stay, and incidence of adverse events. Results: Statistically significant differences were observed in the recovery profile between the groups: the median time for extubation was 3.65 (3.44-6.2) vs. 6.25 (4.21-7) minutes in groups D vs. F (P=0.001), respectively, while the corresponding awakening times were 19 (18.75-21) and 22.5 (22-24) minutes, respectively (P < 0.001). The mean ET-Sevo was low in group D (1.1 vs. 1.2; P < 0.001). The heart rate was significantly low across all time points in group D, without resulting in bradycardia. The median RASS and CHEOPS scores were also significantly lower in group D. No significant differences were observed in the mean arterial pressure, incidence of adverse events, or length of PACU stay. Conclusion: Low-dose dexmedetomidine was more effective than fentanyl as an opioid substitute at providing a better recovery profile in pediatric ambulatory oral rehabilitation under GA. Dexmedetomidine also significantly reduced sevoflurane consumption without causing adverse events or prolonging hospital stay.