• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.673-678
• /
• 2002

Laboratory calibration chamber tests for cone penetrometers, pressuremeters and dilatometers in cohesionless soil specimens have been conducted by numerous researchers. However, there have been only few applications to compacted or preconsolidated cohesive soils. Therefore, for the first time, Calibration Chamber System was developed in Korea University. This can be attributed to the extremely time consuming and laborious process involved in the preparation of large cohesive soil specimens in addition to other complexities involving instrumentation for pore pressure monitoring and the need for maintaing saturation by back pressure. Chamber System with similar principle as LSU Chamber System was made of more strengthen and complementary form by increasing system diameter(1.2m), carrying out 1st and 2nd consolidation process in one system for smooth and safe work, accurate Data Aquisition.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.589-594
• /
• 2000

The fuzzy controllers have been applied to the power system stabilizer due to its excellent properties on the nonlinear systems. But the design process of fuzzy controller requires empirical and heuristic knowledge of human experts as well as many trial-and-errors in general. This process is time consuming task. This paper presents an parameters tuning method of the fuzzy power system stabilizer using the genetic algorithm and simulated annealing(SA). The proposed method searches the local minimum point using the simulated annealing algorithm. The proposed method is applied to the one-machine infinite-bus of a power system. Through the comparative simulation with conventional stabilizer and fuzzy stabilizer tuned by genetic algorithm under various operating conditions and system parameters, the robustness of fuzzy stabilizer tuned by proposed method with respect to the nonlinear power system is verified.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.24 no.3
• /
• pp.309-316
• /
• 2021

In this paper, the electrical power output of the micro-combustor thermophotovoltiac(TPV) system was analyzed. The system consists of a micro-combustor, photonic crystals(PhCs), and photovoltaic cells(PV cells). The system has a micro-combustor that can achieve over 1,000 K surface temperature by consuming 2.5 g/h hydrogen fuel. Also, this system incorporates current state-of-the-art PhCs surfaces(2D Ta PhCs and Tandem Filter) to increase electrical power output. In addition, InGaAsSb PV cell, which bandgap is 0.55 eV, was applied to convert a wide range of radiative energy. The performance analysis shows that a single micro-combustor TPV system can produce 0.4 W ~ 27.7 W electrical power with the temperature change of emitter(900 K ~ 1,500 K) and PV cell(250 K ~ 400 K).

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.51-60
• /
• 2023

This study focuses on the design of a GPT-based system for relatively rapid technology credit assessment of SMEs. This system addresses the limitations of traditional time-consuming evaluation methods and proposes a GPT-based model to comprehensively evaluate the technological capabilities of SMEs. This model fine-tunes the GPT model to perform fast technical credit assessment on SME-specific text data. Also, It presents a system that automates technical credit evaluation of SMEs using GPT and LLM-based chatbot technology. This system relatively shortens the time required for technology credit evaluation of small and medium-sized enterprises compared to existing methods. This model quickly assesses the reliability of the technology in terms of usability of the base model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.408-415
• /
• 2007

A switched-gain controlled LNA is designed and implemented in 0.18 um CMOS technology for $3.1{\sim}4.8\;GHz$ UWB system. In high gain mode, measurement shows a power gain of 12.5 dB, an input IP3 of 0 dBm, while consuming only 8.13 mA of current. In low gain mode, measurement shows a power gain of -8.7 dB, an input IP3 of 9.1 dBm, while consuming only 0 mA of current.

• Structural Engineering and Mechanics
• /
• v.17 no.2
• /
• pp.245-266
• /
• 2004

Incremental launching method is one of the highly competitive techniques for construction of concrete bridges. It avoids costly and time consuming form work and centralizes all construction activities in a small casting yard, thus saving in cost and time against conventional bridge construction. From the quality point of view, it eliminates the uncertainty of monolithic behaviour by allowing high repetitiveness and industrial environment. But, from analysis and design point of view, the most characteristic aspect of incrementally launched bridges is that, it has to absorb the stresses associated with the temporary supports that are gradually taken on by the deck during its launch. So, it is necessary to analyse the structure for each step of launching which is a tedious and time consuming process. Effect of support settlements or temperature variation makes the problem more complex. By using transfer matrix method, this problem can be handled efficiently with minimal computational effort. This paper gives insight into method of analysis, formulation for optimization of the structural system, effect of support settlement and temperature gradient, during construction, on the stress state of incrementally launched bridges.

• Journal of Internet Computing and Services
• /
• v.13 no.6
• /
• pp.1-8
• /
• 2012

Clustering method is divided into hierarchical clustering, partitioning clustering, and more. K-Means algorithm is one of partitioning clustering and is adequate to cluster so many documents rapidly and easily. It has disadvantage that the random initial centers cause different result. So, the better choice is to place them as far away as possible from each other. We propose a new method of selecting initial centers in K-Means clustering. This method uses triangle height for initial centers of clusters. After that, the centers are distributed evenly and that result is more accurate than initial cluster centers selected random. It is time-consuming, but can reduce total clustering time by minimizing the number of allocation and recalculation. We can reduce the time spent on total clustering. Compared with the standard algorithm, average consuming time is reduced 38.4%.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.29 no.4
• /
• pp.185-194
• /
• 2017

Currently, in comparison with other architectural estimations, the estimation work regarding building mechanical-service systems is time-consuming, and the process is continuously becoming more difficult because of the increased usage of the attached piping materials such as fittings and hangings in addition to their complicated construction processes. To improve this problem, the Korean authority provides a simple estimation method for the attached-material rate regarding the main piping material, which is the most time-consuming work in the architectural-mechanical estimation. However, to be an applicable method on construction sites, a proper conversion rate of the attached-piping material is still required for the proposed method regarding building usage and working types. Therefore, the purpose of this research is the calculation of the rate of the attached-piping materials such as the fittings and supports through the building of the mechanical-service work types of mechanical rooms, air conditioning, domestic water and hot-water supplies, and the drain-, vent-, and gas-piping work in office buildings that have been designed after 2010.

• Preventive Nutrition and Food Science
• /
• v.19 no.4
• /
• pp.367-372
• /
• 2014

Caffeine is widely consumed and well known for stimulating the central nervous system. When developing new foods and beverages that contain caffeine, it is important to explore the potential synergistic effects of consuming amino acids and other food ingredients with caffeine on humans. Given the physiological pathways affected by the amino acid ornithine, consumption of ornithine with caffeine may have synergistic effects. The purpose of the present study was to examine the effect of consuming caffeine with ornithine in humans. The study used a randomized, placebo-controlled, double-blinded crossover design. The subjects were all healthy office workers who ingested the placebo, 100 mg caffeine, or 100 mg caffeine plus 200 mg ornithine in the morning and completed questionnaires about their mood. Office workers who consumed the combination of caffeine and ornithine had higher mood ratings 8 h after consumption than office workers who consumed caffeine alone. The results of the present study suggest that there is a unique synergistic effect between caffeine and ornithine on the mood of healthy office workers and that ornithine may potentiate the effects of caffeine.

• Journal of the Regional Association of Architectural Institute of Korea
• /
• v.20 no.6
• /
• pp.1-8
• /
• 2018

In generally, the estimation work regarding building mechanical service system in comparison with other architectural estimations is time-consuming, and the process is continuously getting more difficult because of the increased usage of the attached piping materials such as fittings and supports in addition to their complicated construction processes. In order to improve this problem, the Korean authority provides a simple method to estimate the attached material rate regarding the main piping material, which is the most time-consuming work in the architectural mechanical estimation. However, to be an applicable method on construction site, a proper conversion rate of the attached piping material is still required for the proposed method regarding building usage and working types. Therefore, the purpose of this research is the suggestion of the material and labor cost rate of the attached piping materials such as the fittings and supports by work types and fitting methods of indoor fire, sprinkler, and extinguishing gas piping work of mechanical fire protection facilities in office buildings that have been designed after 2010.