• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.50-54
• /
• 2011

Recently there are so many media contents created and used by variety routes. Therefore, it is essential to make a new platform which is used for distributing media contents include IPTV. With open IPTV service, developing the new platform became even more important. Because open IPTV makes it possible for consumers to choose contents regardless of contents of the providers. The new platform has to accept current variety service structure. MPEG-21 multimedia framework was developed to satisfy these needs. It presented the distribution framework of the contents but didn't restrict the particular solutions for protecting the rights. In this paper, we present authoring and consuming system for package contents based on MPEG-21 Multimedia Framework for distributing media resources and managing the license of multimedia contents

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.3
• /
• pp.232-242
• /
• 1997

In this paper, we have designed an active radio frequency identification system solving the problems of moving transponder which is identification range expanding and low battery consuming of transponder. Developed radio frequency identification system is a bidirectional data transmission system which is composed of decoder data transmission of 120 kHz and transponder data carrier of 60 kHz which is a subharmonic frequency response with ASK modulation. The experimental results, designed system operating at 9600 bps, show good performances with detecting the 40 km/h moving transponder up to the range of 2 and 15 ${mu}A$ low consuming current.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.3
• /
• pp.119-124
• /
• 2006

This paper deals with energy-saving effort in the hydraulic power steering system. Commonly, the hydraulic power steering systems are used for passenger cars and the reduction of pumping loss under non-steering condition is important to improve fuel economy. Experiments and simulations are performed simultaneously to examine the main factors to reduce the pumping loss-pressure loss and flow rate of the power steering systems. Fuel economy effect of the optimal design of power steering system is verified by vehicle test - more than 1% fuel consuming reduction is attained.

• Journal of Aerospace System Engineering
• /
• v.6 no.2
• /
• pp.23-27
• /
• 2012

The evaluation of simulation models against ADS-33 quantitative rotorcraft handling qualities metrics has, in the past, been a time consuming effort, involving many individual analyses in both the time and frequency domains. Manual tuning of control system parameters to meet handling qualities and performance specifications has been cumbersome and complicated. Performing rigorous trade-off studies for numerous variations in the control system is too time consuming to be practicable. With the complex interaction of time- and frequency based specifications for the closed- and broken-loop responses, it is difficult to know if the design makes the most effective use of the available control power. The Control Designer's Unified Interface (CONDUIT) software makes possible rapid optimization and trade-offs of design configurations against handling qualities specifications.

• Journal of Sensor Science and Technology
• /
• v.22 no.6
• /
• pp.387-392
• /
• 2013

Camera rigs for shooting 3D video are classified as manual, motorized, or fully automatic. Even in an automatic camera rig, the process of Stereoscopic 3D (S3D) video capture is very complex and time-consuming. One of the key time-consuming operations is capturing the distance parameters, which are near distance, far distance, and convergence distance. Traditionally these distances are measured by tape measure or triangular indirect measurement methods. These two methods consume a long time for every scene in shot. In our study, a compact laser distance sensing system with long range distance sensitivity is developed. The system is small enough to be installed on top of a camera and the measuring accuracy is within 2% even at a range of 50 m. The shooting time of an automatic camera rig equipped with the laser distance sensing system can be reduced significantly to less than a minute.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.6
• /
• pp.1075-1081
• /
• 2008

The growth of digital content market inducted to develope consuming device of various content. And through this, digital content consuming is more Promoted. But digital content cryption tool need to handle to protect and consume digital content safely. Also, interoperability of cryption tool management is impossible, because of not standardized transfer protocol between device. In this paper, we defined transfer protocol of cryption tool for protecting and consuming digital content. And in this base, we designed and implemented transfer server/client system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.11
• /
• pp.17-22
• /
• 2010

This paper presents a unique method for simulating permanent magnet motors without time-consuming numerical methods used in the conventional magnetic circuit method. The conventional method gives us average values like torque and power over specified periods of time, but it is usually very difficult and time-consuming to obtain instantaneous characteristics like cogging torques and torque ripples. The convolution operations method we present, however, considers relative angle variations of stator magnetic circuits and rotor magnetic circuits. As a result, it makes uses of instantaneous values possible. The authors compare the new method with the coventional method and verify that calculating cogging torque values and back-emf values is possible with the proposed new convolution method.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.11
• /
• pp.58-66
• /
• 1998

A low power consuming laser scanning vibrometer is studied for its development. For its optical system, a laser interferometer is constructed to use the Doppler effect. In order to reduce the driving power of the scanning system, a small displacement of the scanning system is produced, which is achieved by using a magnetostrictive actuator. A sufficient rotating angle of the scanning system is obtained by using an amplified displacement from the resonant phenomena of a second order mechanical system composed of a mass and spring. The control of the magnetostrictive actuator using a Terfenol-D is performed without using a feedback system to help reduce the power consumption. The vibration analysis is made for the sinusoidal scanning input to have the space domain information from the time domain of the velocity of a vibration object. As a partial work of development of a tow power consuming laser scanning vibrometer, in this work, a scanning system which has the above features is developed and experimentally investigated. For the purpose of the optical system calibration, the vibration measurement for one axis is presented and the future works are discussed.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2005.04a
• /
• pp.71-78
• /
• 2005

In performance-based design methods, it is clear that the evaluation of the nonlinear response is required. The methods available to the design engineer today are nonlinear tim history analyses, or monotonic static nonlinear analyses, or equivalent static analyses with simulated inelastic influences. The nonlinear time analysis is the most accurate method in computing the nonlinear response of structures, but it is time-consuming and necessitate more efforts. Some codes proposed the capacity spectrum method based on the nonlinear static analysis to determine earthquake-induced demand given the structure pushover curve. This procedure is conceptually simple but iterative and time consuming with some errors. The nonlinear direct spectrum method is proposed and studied to evaluate nonlinear response of structures, without iterative computations, given by the structural linear vibration period and yield strength from the pushover analysis. The purpose of this paper is to compare the accuracy and the reliability of approximate nonlinear methods with respect to RC dual system and various earthquakes.

• Journal of the Korean Home Economics Association
• /
• v.40 no.2
• /
• pp.143-159
• /
• 2002

Consumer Education Policy for -Focusing on developing Social support System- The purpose of this research is to understand the change of future consuming environment and the characteristics of future potential consumer: the net generations. With those research results, we deduced our goal, content and method of consumer education for these net generations. Finally, I suggested a scheme of the social construction by demand of our future society. Literature review and depth interview are used for this research. The main factors of the change of our future consuming environment are Digitalization, globalization, improvement of consumer sovereignty, Sustainable consumption culture, the increasing pursuit of safe life. It is necessary to educate our future consumer, net generations, the information searching skills in order to be able to obtain right information. We also need to educate them how to practice the safe life and Sustainable consumption and how to get consumers sovereignty. The method of the education requires interchangeable communication. We need social networking system for the support of consumer education, in order to build this social system. We need an administrative support from the government and financial support from corporations. We have suggested that it is very desirable to share all the information developed among Academic field, Consumer related organizations and schools by this network be build.