• 대한전자공학회논문지SD
• /
• 제47권7호
• /
• pp.52-60
• /
• 2010

본 논문에서는 멀티코어 시스템을 위한 동적전력관리 프레임워크를 통하여 응용프로그램의 특성에 따라 멀티코어의 불필요한 전력소모를 줄일 수 있음을 Intel Centrino Duo를 사용한 경우와 ARM11 MPCore를 사용한 경우를 통하여 검증하였다. 프로세서의 종류에 따라 전력 소모를 줄이기 위하여 사용된 기술에 차이가 있으며 아직까지는 멀티코어 임베디드 프로세서에 동적 전압 관리와 같은 정밀한 제어가 이뤄지지 못하고 있다. 제안하는 동적전력관리 프레임워크를 이용하여 스마트폰과 같이 운영체제를 통한 멀티 프로세싱을 지원하는 환경에서는 다수의 프로세서가 소모하는 불필요한 전력을 효과적으로 줄일 수 있어야한다. 필요한 만큼의 프로세서 성능을 결정하고 실시간으로 프로세서의 성능을 변경함으로써 각 응용프로그램의 동작을 위한 최소 요구사항을 만족시키면서 전력소모를 최소화 시킬 수 있다. 이를 위하여 본 논문에서는 응용프로그램의 실행과 종료에 따라 필요한 동작을 자동화시키고 시스템 성능을 분석하기 위한 기준을 정의하였다. 대표적인 임베디드 프로세서와 범용프로세서에 제안하는 전력 관리 프레임워크를 적용하여 성능을 검증하였으며 본 논문이 제안한 동적전력관리 프레임워크가 응용프로그램의 최소 요구 성능을 만족시키면서 가능한 전력소모를 줄일 수 있는 인터페이스라는 것을 확인하였다.

• 한국소음진동공학회논문집
• /
• 제22권9호
• /
• pp.845-852
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention from not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation on the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100 mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6 % at 2 m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfering distance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.771-776
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention of not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation for the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6% at 2m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfer distance.

• 한국전자파학회논문지
• /
• 제21권1호
• /
• pp.36-45
• /
• 2010

본 논문에서는 가전기기 등에 무선으로 전력을 전송하는 것을 목표로 루프 안테나를 이용한 무선 전력 전송 시스템의 새로운 설계 방법을 제안하였다. 본 설계 방법은 복잡한 전자기 시뮬레이션 없이 간단한 결합 계수의 측정과 루프 안테나의 등가 회로 모델에 대한 근사식만으로 무선 전력 전송 시스템을 설계할 수 있다. 본 논문에서 제시한 설계 방법에 따라 13.56 MHz에서 동작하는 $50{\times}50\;cm^2$ 크기를 갖는 루프 안테나 쌍을 설계하고, 거리에 따른 입력 반사 계수, 결합 계수, 효율 및 임피던스 변화를 측정하였다. 측정 결과, 본 논문에서 제안한 설계 방법이 입력 임피던스 특성을 정확하게 예측할 수 있음을 확인하였다. 또한 50 cm 이하의 거리에서 본 논문의 설계 방법을 이용하여 임피던스 정합한 무선 전력 전송 시스템이 일반적인 $50\;{\Omega}$ 임피던스 정합 회로를 갖도록 설계된 경우보다 효율이 2배 정도 개선되는 것을 확인하여 제안한 설계법의 유용성을 확인하였다.

• ETRI Journal
• /
• 제42권4호
• /
• pp.585-595
• /
• 2020

Integration of multiple communication technologies in a smart grid (SG) enables employing cognitive radio (CR) technology for improving reliability and security with low latency by adaptively and effectively allocating spectral resources. The versatile features of the CR enable the smart meter to select either the unlicensed or the licensed band for transmitting data to the utility company, thus reducing communication outage. Demand response management is regarded as the control unit of the SG that balances the load by regulating the real-time price that benefits both the utility company and consumers. In this study, joint allocation of the transmission power to the smart meter and consumer's demand is formulated as a two stage multi-armed bandit game in which the players select their optimal strategies noncooperatively without having any prior information about the media. Furthermore, based on historical rewards of the player, a real-time pricing adaptation method is proposed. The latter is validated through numerical results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.151-152
• /
• 2011

This paper describes a cross-regulation characteristics of a multi-output LLC resonant converter widely used in consumer electronics. The output characteristics of the multi-output LLC converter is derived from the assumption that the current and voltage to flow through the resonant network is sinusoidal and the duty loss is investigated. The simulation results are provided to verify the theoretic results.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2007년도 춘계학술대회 논문집
• /
• pp.468-472
• /
• 2007

For small capacity rectifier circuits such as these for consumer electronics and appliances, capacitor input type rectifier circuits are generally used. Consequently, various harmonics generated within the power system become a serious problem. Various studies of this effect have been presented previously. The absence of switching devices makes systems more tolerant to over-load, and brings low radio noise benefits. We propose a power factor correction scheme using a LC resonant in commercial frequency without switching devices. In this method, It makes a sinusoidal wave by widening conduction period using the current resonance in commercial frequency, Hence, the harmonic characteristics can be significantly improved, where the lower order harmonics, such as the fifth and seventh orders are much reduced. The result are confirmed by the theoretical and expermental implementations

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.290-293
• /
• 2002

For small capacity rectifier circuits such as these for consumer electronics and appliances, capacitor input type rectifier circuits are generally used. Consequently, various harmonics generated within the power system become a serious problem. Various studies of this effect have been presented previously. However, most of these employ switching devices, such as FETs and the like. The absence of switching devices makes systems more tolerant to over-load, and brings low radio noise benefits. We propose a power factor connection scheme using a LC resonant in commercial frequency without switching devices. In this method, It makes a sinusoidal wave by widening conduction period using the current resonance in commercial frequency, Hence, the harmonic characteristics can be significantly improved, where the lower order harmonics, such as the fifth and seventh orders are much reduced. The result are confirmed by the theoretical and experimental implementations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.1235-1237
• /
• 2003

For small capacity rectifier circuits as these for consumer electronics and appli capacitor input type rectifier circuits are gen used. Consequently. various harmonics gen within the power system become a serious pro Various studies of this effect have been pres previously. However. most of these employ swit devices, such as FETs and the like. The absen switching devices makes systems more toleran over -load, and brings low radio noise benefits propose a power factor correction scheme using resonant in commercial frequency without swit devices. In this method. It makes a sinusoidal by widening conduction period using the cu resonance in commercial frequency. Hence, harmonic characteristics can be significantly imp where the lower order harmonics. such as the and seventh orders are much reduced. The resu confirmed by the theoretical and experm implementations.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2003년도 학술대회논문집
• /
• pp.403-406
• /
• 2003

For small capacity rectifier circuits such as these for consumer electronics and appliances, capacitor input type rectifier circuits are generally used. Consequently, various harmonics generated within the power system become a serious problem. Various studies of this effect have been presented previously. However, most of these employ switching devices, such as FET and the like. The absence of switching devices mattes systems more tolerant to over-load and brings low radio noise benefits. We propose a power factor correction scheme using a LC resonant in commercial frequency without switching devices. In this method It makes a sinusoidal wave by widening conduction period using the current resonance in commercial frequency, Hence, the harmonic characteristics can be significantly improved, where the lower order harmonics, such as the fifth and seventh orders are much reduced The result are confirmed by the theoretical and experimental implementations.