• Land and Housing Review
• /
• v.13 no.4
• /
• pp.27-44
• /
• 2022

In December 2019, the Ministry of Land, Infrastructure and Transport announced the revision of the Enforcement Decree of the Industrial sites and Development Act. In this revision, the reinvestment ratio of development profits generated by renewing the old industrial park is delegated to the local government ordinance. According to this announcement, the reinvestment ratio can be adjusted to less than 50% of sales revenue from construction projects and 25% of land sales for non-industrial use depending on local government conditions. This study aims to investigate the policy rationale for the adjusted ratio of reinvestment in development profits and explore how Daegu City can use this policy when revising ordinances in the future. A survey was conducted with a total of 320 experts, including public corporations, public officials, and industrial site workers in the Industrial Complex Committee. We employ contingent value measurement (CVM) based on 262 valid responses. The results showed that 27% of sales from the construction business and 22% of sales from non-industrial land were derived with an appropriate reinvestment ratio. Although the results in this study might not be generalized in other regions, we provide a potential reference for other local governments who are interested in ordinance revisions in the future. Another contribution of this study is to suggest the statistical method to derive the relevant ratio.

• Explosives and Blasting
• /
• v.38 no.4
• /
• pp.16-25
• /
• 2020

Multi-setting smart-investigation of the ground and large uncharged hole boring (MSP) method to reduce the blast-induced vibration in a tunnel excavation is carried out over 50m of long-distance boring in a horizontal direction and thus has been accompanied by deviations in boring alignment because of the heavy and one-directional rotation of the rod. Therefore, the deviation has been adjusted through the boring machine's variable setting rely on the previous construction records and expert's experience. However, the geological characteristics, machine conditions, and inexperienced workers have caused significant deviation from the target alignment. The excessive deviation from the boring target may cause a delay in the construction schedule and economic losses. A deep learning-based prediction model has been developed to discover an ideal initial setting of the MSP machine. Dropout, early stopping, pre-training techniques have been employed to prevent overfitting in the training phase and, significantly improved the prediction results. These results showed the high possibility of developing the model to suggest the boring machine's optimum initial setting. We expect that optimized setting guidelines can be further developed through the continuous addition of the data and the additional consideration of the other factors.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.39 no.3
• /
• pp.179-186
• /
• 2021

In general, the daily safety inspection activities, which investigate damages in structures and measures the size of the damage, have been relied heavily on the visual inspection so far. Since the probe of the condition and performance of facilities by such personnel is often dependent on the subjective judgment of the investigator, the consistency and repeatability of the probing results may reduce. Particularly, damage located in a difficult-to-reach place depends mainly on experience with the naked eye, and an unsafe method using a ladder has mainly applied when necessary. Therefore, in this study, we tried to propose a way of using images that can reduce the deviation between safety inspection investigators, enhance objectivity, and improve the safety of workers. In this study, we have applied homographic transformation as a method of correcting the image. As a result of analyzing the size of the damage in the corrected image of the test subject, it confirms that the accuracy of measuring the magnitude of the damage can satisfy the target levels of 5.0mm and 0.005m², the target accuracy levels. As a result of the field verification test to which the proposed image correction technique applied, the coefficient of variation of the crack length in the structure decreased from 5.4~7.0% to 0.072~0.12%, and that of the damaged area from 10.9% to 1.6%. It confirms that the measurement accuracy is improved. Therefore, it is expected that this study on the image utilization technique in safety inspection activities can increase the accuracy of damage measurement and improve the reliability of the safety inspection reports and exterior survey drawings.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.4
• /
• pp.57-64
• /
• 2022

A plant factory is a facility that creates an artificial environment in a controlled space and produces plants systematically through automated facilities. However, automation in the cultivation process is insufficient compared to the internal environment control technology in plant factories. This causes the problem of an increase in operating costs due to the input of a large number of workers. Therefore, this study aims to evaluate economic feasibility by comparing before and after introducing automation in the cultivation process of plant factories. The target plant factory to be analyzed was selected, and the break-even point analysis method was used by comparing the cost required compared to the operating period. As a result, the break-even point was analyzed to be 3.4 years when automation was introduced into six processes for plant cultivation. Therefore, it can be judged that the introduction of automation is excellent in terms of economic feasibility when the target plant factory has been operated for more than 3.4 years. This study is expected to be used as basic data to analyze the economic feasibility of introducing automation in domestic and foreign plant factories.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.3
• /
• pp.231-241
• /
• 2022

Objectives: The purpose of this study is to evaluate the input status of exposure-related information in the working environment monitoring database (WEMD) and special health examination database (SHED) for the construction of a national exposure surveillance system. Methods: The industrial and process code input status of WEMD and SHED for 21 carcinogens from 2014 to 2016 was compared. Data from workers who performed both work environment monitoring and special health examinations in 2019 and 2020 were extracted and the actual status of input of industrial and process codes was analyzed. We also investigated the cause of input errors through a focus group interview with 12 data input specialists. Results: As a result of analyzing WMED and SHED for 21 carcinogens, the five-digit industrial code matching rate was low at 53.5% and the process code matching rate was 19% or less. Among the data that simultaneously conducted work environment monitoring and special health examination in 2019 and 2020, the process code matching rate was very low at 18.1% and 5.2%, respectively. The main causes of exposure-related data input errors were the difference between the WEMD and SHED process code input systems from 2020, the number of standard process and job codes being too large, and the inefficiency of the standard code search system. Conclusions: In order to use WEMD and SHED as a national surveillance system, it is necessary to simplify the number of standard code input codes and improve the search system efficiency.

• Journal of the Society of Disaster Information
• /
• v.17 no.2
• /
• pp.306-318
• /
• 2021

The dispatch law has a negative impact on safety management at construction sites as the command and command relationship to safety assistants of the original contractor are applied to the dispatch law. Purpose: The purpose is to study the importance and impact of safety management according to the dispatch law, and to propose a direction for safety management so that safety assistants can actively and proactively prevent accidents. In this study, we used AHP analysis techniques for experts to achieve the final goal and verified the suitability through logistic regression. Method: AHP analysis technique is used for experts and workers and logistic regression analysis is conducted. Result: The result of analyzing scenario data where the dispatch method can be applied showed the importance in the order of education (SkillUp education), management (work-time management) and direct instructions (feedback instruction). In logistic regression analysis, feedback is the factor that affects direct instruction, and in education management, the ratio of education management is 3.42 times lower than that of other groups when only the team leader of the company gives work instructions. Conclusion: The management of feedback and education is more important than anything else within the range in which the dispatch method is not applied, and the expansion of non-face-to-face online education is judged to avoid the violation of dispatch method because the expansion of non-face-to-face online education due to covid 19 recently has brought more various target for safety education.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.3
• /
• pp.181-188
• /
• 2021

In this study, the various performance of dry cement mortar for Korean floor heating system depending on water-to-dry mortar ratios (W/DM) applied in project site was evaluated. According to the experiment conducted, the importance of mixing water for dry cement mortar was revealed by resultant performance or quality of the dry cement mortar for floor finishing by changing W/DM controlled in project site by workers. As the general trend, the flow was increased, and the unit volume weight was decreased with increasing W/DM. Additionally, compressive strength and drying shrinkage were significantly influenced by W/DM. Hence, it can be stated that the adding water for dry cement mortar should be managed precisely since excessively increased W/DM for workability improvement can cause performance degradation of floor mortar with the failures such as excessive bleeding, and severe segregation during the fresh state. As a summary of the study, to achieve a desirable performance of dry cement mortar, approximately 20 % of W/DM can be suggested to be managed in project site.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.2
• /
• pp.161-169
• /
• 2022

The government [3] specifies steel pipe scaffolding as conventional scaffolding and is promoting the installation of system scaffolding, an integrated work platform, and avoidance of the use of steel pipe scaffolding as much as possible. However, in places where equipment cannot enter, such as power plants and plant sites, places the structure is complex, and places where scaffolding cannot be stacked on the ground, there is no choice but to install steel pipe scaffolding. When installing steel pipe scaffolding on an H-beam structure at a high place, the performance of the steel frame clamp is very important in order to form a work space which workers can work safely. In this study, the displacement magnitude and tensile load of members in each installation direction of the clamp for steel frame were verified through performance tests and structural analysis modeling. As a result, it was confirmed that the performance for each installation direction satisfies the safety certification standard tensile load of 10,000N. Although the performance value is satisfactory, deformation of the attachment pressing bolt was verified and was confirmed to have minimal deformation. Thus, to ensure the load is properly to the attachment body, the clamp for a steel frame must be installed in the direction in which the load is transmitted.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.2
• /
• pp.26-34
• /
• 2023

This study conducted interviews with former and current managers of Cheongwadae landscape architecture to provide basic information necessary to preserve, manage, and utilize Gyeongbokgung Palace's back garden, and the main conclusions summarized are as follows. First, the topography changed a lot with the construction of the main building and the official residence under President Roh Tae-woo. The water system was connected to Gyeongbokgung Palace in the past, but is now disconnected. Second, in the case of planting, the most important principles were the president's security and protocol, and accordingly, trees were placed or managed. Trees were planted by introducing excellent trees in various regions, and wildflowers and ground cover plants were frequently replaced according to the season. Third, facilities and roads were arranged for the president's protocol, hobbies, and workers' rest, and fire-fighting facilities were installed to prevent disaster in the forest area of Baegaksan Mountain. Fourth, the biggest inflection point of Gyeongbokgung Palace's back garden during Cheongwadae period was the change in topography due to the new construction of the main building and official residence during President Roh Tae-woo, the removal of A and B barbed wire fences that separated space during President Roh Moo-hyun, and the extensive landscaping carried out for the G20 Summit under President Lee Myung-bak. The area of Gyeongbokgung Palace's back garden is expected to face another inflection point due to the opening of Cheongwadae on May 10, 2022, and the work of evaluating the historical, academic, and landscape values of Gyeongbokgung Palace's back garden should be carried out while preserving the status.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.5
• /
• pp.1-12
• /
• 2023

This study evaluated the overturning stability of portable tripod ladders used for high-altitude work such as tree management and pruning work in landscaping construction and management. Portable tripod ladders, which are included in general mobile or portable ladders frequently used in industrial sites, are supported in a triangular support structure, not a 4-point support like common A-type Ladders. In addition, since the working height is more than twice that of a mobile or portable ladder, the possibility of an overturning accident that threatens the safety of workers with a fall accident is high. Therefore, based on the overturning stability test specified in ANSI-ASC A14.7 and EN 131-Part 7, which are related standards for about 130 types of portable tripod ladders sold and used in Korea. An equation to calculate each moment according to working height was derived. Then, each calculated moment was compared to evaluate the safety factor for overturning and stability. As a result of the overturning stability evaluation according to each standard, when the provisions of EN 131-Part 7 were applied, portable tripod ladders with 8 steps in the rear direction and 6 steps or more in the side direction were evaluated as unstable against overturning, but according to ANSI-ASC A14.7 regulations. It was evaluated that the stability against overturning was secured in all directions and number of steps.