• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 춘계학술대회 논문집
• /
• pp.367-374
• /
• 1999

The selection of geogrid types for the use of reinforced rail roadbed is important in the design of railways. Also, the problem of the construction damage on the geogrid during construction is raised by the field engineers. Therefore, laboratory model tests were peformed to investigate the efficiency of the bearing capacity and construction damage. As a result, it was found that the bearing capacity of the rigid geogrid reinforced railroad ballast shows 1.54 times higher than that of the flexible geogrid reinforced case. In addition, there were no noticeable damage during construction.

• 한국의류학회지
• /
• 제42권2호
• /
• pp.298-310
• /
• 2018

This study examines how to improve clothes according to types of disability and classify related studies. The study method used a literature review along with studies conducted after 2000. According to the results, the types of disability causing difficulty in terms of clothing habits are limb disorders and sensory defects among the types of physical disability. The results of the quantitative measurement on studies indicated that the number of studies increased almost twice as much before 2000. Particularly with the development of new technology and fashion trends, the number of studies on design increased. The topics of studies are found in design development, construction for disabled, and understanding clothing life. The design development topic is about suggesting functional designs that can protect the human body or aid in the use of rehabilitation devices. The construction topic for the disabled is to improve the inconvenience of wearing clothes, particularly for those with limb disorders. Lastly, the topic of examining clothing life is about using new technology to provide individuals with sensory defects with information about clothing life or the current status of the clothing market for the disabled.

• KIEAE Journal
• /
• 제8권1호
• /
• pp.99-104
• /
• 2008

This study surveys the types of form works used for constructing composite basement walls found in domestic construction sites. Based on expert surveys, the research provides criteria for selecting a form work type and cost-benefit analysis for different types of form works. In selecting a form work type, safety was considered the most important factor. It is induced from the survey that a successful construction requires a form work type that could solidly bear the lateral pressure of concrete rather than other types that cut back the cost and shorten the construction period. In the cost-benefit analysis, the benefit was the highest in 'euro-form+soldier system', and the cost was most competent in 'rib-lath+soldier system'. In considering benefit and cost together, 'euro-form+soldier system' was judged to be the best option. This is likely to be attributed to the following reasons: site workers are familiar with euro-forms because it is the most widely used; and, soldier system is more reliable in bearing lateral pressure compared to steel pipes.

• 설비공학논문집
• /
• 제29권4호
• /
• pp.185-194
• /
• 2017

Currently, in comparison with other architectural estimations, the estimation work regarding building mechanical-service systems is time-consuming, and the process is continuously becoming more difficult because of the increased usage of the attached piping materials such as fittings and hangings in addition to their complicated construction processes. To improve this problem, the Korean authority provides a simple estimation method for the attached-material rate regarding the main piping material, which is the most time-consuming work in the architectural-mechanical estimation. However, to be an applicable method on construction sites, a proper conversion rate of the attached-piping material is still required for the proposed method regarding building usage and working types. Therefore, the purpose of this research is the calculation of the rate of the attached-piping materials such as the fittings and supports through the building of the mechanical-service work types of mechanical rooms, air conditioning, domestic water and hot-water supplies, and the drain-, vent-, and gas-piping work in office buildings that have been designed after 2010.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.8-13
• /
• 2021

Excavators are construction machines used for digging soil, transporting soil, dismantling buildings and clearing the ground at construction sites. There are various attachments attached to the arm end of the excavator and used for various operations. There are the most common types of buckets attached for excavation and other types of attachments used for foresting, road cleaning, snow removal, and waste disposal. When multiple types of work are done at the same time, several attachments must be replaced and a device called a quick coupler is used to reduce replacement time. Although a quick coupler reduces the replacement time of the Attachment, it is necessary to attach safety devices to prevent unintentional detachment of attached attachments during the operation. To prevent the attachment from leaving or falling regardless of the operator's intention, support is installed in the hook of the bucket pin and controlled through a separate hydraulic cylinder to ensure safety. When attaching an attachment, it shall be attached without any action. This study is intended to verify the design validity of safety devices to prevent falls of attachments occurring at construction sites.

• 한국건축시공학회지
• /
• 제15권5호
• /
• pp.491-500
• /
• 2015

본 연구에서는 공동주택에서 건설 공사비 증가의 원인이 되는 하자에 대하여 건설업체의 공급자 중심이 아닌, 소비자가 법적인 하자보수 책임기간 만기를 앞두고 안전진단 전문기관에 의뢰하여 얻은 하자진단 결과보고서 자료를 근거로 공종별 하자실태를 조사하였다. 또한, 보수비용적 측면에서 세부요인을 분석하여, 시공단계에서의 품질향상과 하자분쟁 해결의 객관적이며 기초적인 자료를 제시하였다.

• 한국전산구조공학회논문집
• /
• 제33권2호
• /
• pp.73-79
• /
• 2020

BIM 도구는 설계프로세스에서 기술의 사용이 증가하면서 그에 따른 정보표준체계가 필요하게 되었다. 건설이 완료된 결과(Result) 분류는 25종 단위시설에 327종의 유형, 결과를 구성하는 객체는 174종의 Part와 207종의 Component로 분류하고 있다. 선행연구에서는 도로와 하천 분야 대상으로 속성분류체계를 대분류 4종, 중분류 13종, 소분류 58종, 속성정보 333종으로 분류하였고, 객체분류에 따른 대량의 속성정보를 입력하는 것의 소요 시간을 줄이는 것이 관건이었다. 따라서, Revit 플러그인과 같은 외부 응용 프로그램 개발을 통해 구체적이고 반복적인 작업에 자동화가 필요하다. BIM 속성분류체계를 따르면서 사용자의 생산성과 편의성을 강화할 수 있는 BIM 속성입력 프로그램을 구현하였다.

• 패션비즈니스
• /
• 제12권3호
• /
• pp.116-135
• /
• 2008

To investigate the actual distribution condition and clothing construction factors of the working clothes supplied to the Changwon national industrial complex, 5 major companies in machinery, automotive, industrial engineering, shipbuilding and rolling stock in the industrial complex located in Gyeongsangnam-Do were selected. The questionnaire designed for the research consisted of working clothes distribution policies in manufacturing industry and the actual conditions of the design facts, repair and maintenance of the working clothes, etc. The analysis of the clothing construction factors of the working clothes provided by 5 respondent companies were conducted in parallel. The results derived from the study were as follows: The basic types of working clothes were the blouson jacket and straight pants; safety equipments for manufacture were safety helmets, gloves, snickers, goggles, masks, ear caps, wristlets, leggings, apron, etc. The size-charts adopted by the participant companies were the small-medium-large and cm/inch measurement size systems. To solve wearer's dissatisfaction with the garment fit, certain clothing construction factors were used, e.g. strap bands and the elastic band on a waist band. The types of fabrics used for the working clothes were mainly polyester/cotton and polyester/rayon blended ones. Moreover, to provide with more air permeability to wearers, the warp knit material was used to construct the lining and the armpit or back bodice slits. Lock, two-thread chain, safety, overedge stitches were applied with flat, lap felled, French, superimposed, lapped, bound and edge finishing seams to construct the working clothes selected.

• 건축역사연구
• /
• 제13권2호
• /
• pp.21-38
• /
• 2004

This study provides a descriptive and analytical account of major aspects of urban development and transformation of housing types of Italian Firenze from the 13th century to the 19th century. It is a typo-morphological depiction of urban spatial structure of the extraordinary city, Firenze, the center of Italian Renaissance. And this study has proceeded on the assumption that the evolving form of the urban structure and housing types cannot be understood without reference to the larger context of political, economic, and social life. Based on these backgrounds, the purpose of this study is threefold: to provide a comprehensive discussion of general characteristics of urban spatial structure of Firenze, and to explain the process of formation of working-class neighborhoods by constructing new city wall in later 13th century, and to discuss transformation of housing types of the working-class neighborhood with understanding the mechanism of existence of housing in the newly formed residential neighborhoods. The development of residential neighborhoods was pursued by 'planned' manner through forming square-shaped blocks, and characterized by the subdivision of larger properties into standardized building lots for the construction of houses. On the bases of documentary evidences, several ecclesiastical institutions are identified as the agents of a distinctive type of development. While the institutions did the major role for developing lands, the construction of houses was done by small scale construction agents with moderate amount of properties. The major housing type of working-class neighborhoods of Firenze has been the 'casa a schiera' characterized by the form of narrow front and long depth. The type was generalized by the newly formed middle and working-class of Firenze which grew their body very rapidly, Even though the type assumed very uniform in its fen there were many variations. And through passing time, the casa a schiera developed to be multi-family housing, and the level of variation became deepen. Eventually, transformation of housing type of Firenze was ended by appearance of the 'casa in linea', which was very similar to modern apartment in its spatial organization.

• 한국건축시공학회지
• /
• 제20권6호
• /
• pp.515-525
• /
• 2020

최근 공동주택에서 발생하는 하자로 인한 소송 및 분쟁이 증가하고 있어 사회적 이슈로 대두되고 있다. 이를 해결하기 위해 많은 공동주택 하자 유형에 관한 연구들이 진행되었지만, 문제가 원만하게 해결되지 않고 있다. 최근 시공된 공동주택을 대상으로 공종별 하자 유형을 조사해 추후 하자 대책 및 예방방안을 제시하는 연구의 기반을 마련할 필요성이 강조되었다. 이에 본 연구는 프로젝트관리시스템와 하자보고서를 통해 공동주택에서 발생한 실제 하자 사례를 바탕으로 하자를 분석하였으며, 주요 목적은 공동주택의 세부공종별 하자 유형을 파악함으로써 주요 하자 유형에 대한 원인을 제시하고, 추후 하자 유형별 대책 및 예방방안 연구의 기반을 마련함에 있다.