• 제목/요약/키워드: Construction firm

검색결과 247건 처리시간 0.023초

230KV 2회선승 111M 높이 철탑설계 (I) (강폭 12km인 Bangladesh Jamana강 횡단용) (The design of 111m high steel towers with 220kv double circuits crossing 12 km wide Bangladesh River)

  • 이재숙
    • 기술사
    • /
    • 제15권4호
    • /
    • pp.12-24
    • /
    • 1982
  • East Parts of Bangladesh have been benifited by low cost energy generated by domestic natural gas but West parts where energy generated by imported fuel. Bangladesh Government authority has very much concerned to transmit the low cost electricity to the West from the East for past several years. To solve such concerns, cross-country 230kv double circuits Power transmission line was proposed, however there was a big obstacle for the realization of this line to cross the Jamuna river which has 12 km long width with a deep muddy river bed. A consultant engineering firm named Merz-Mclellan anyway finalized this plan and a world-wide bid was announced on June 31, 1979. Due to the expected difficulty to construct the towers on sea like area, only three construction groups have participated. including a Korean joint venture organization of Samsung-Korean Developement corporation-Kolon Electric Machinery company. After 3 months bid evaluation, contract was awarded to Korean Consosium and KEM Co was in charge of designing steel towers with anchor bolts and base plates beside to electrical engineering field. Then KEM Co have faced and over-comed many unenpected technical difficulties such as forced eccentricity joint on base plate, distorsion issue of 60mm thick plates welding, threading anchor bolts, tad heat treatment of some anchor bolts, disagreement from Consultant Engineer on multiplying factor of leg stresses for 45$^{\circ}$ wind and on reducing O.L.F for wind loads on cables for such 1220km long spans. After spending two years long period for designing and engineering towers, base plates, and anchor bolts, first shipment of tower was finally realized on Nov. 8, 1981 and on the other hand KDD has proceeded concrete caisson work on schedule at Jamuna river site and expected to complete tower erection and stringing of cables within this year of 1982 which was original completion target.

  • PDF

프로젝트 공급망에서 네트워크 배태성이 협업과 기업성과에 미치는 영향연구 : 2차 협력업체를 중심으로 (A Study on the Effect of Network Embeddedness on Collaboration and Performance in the Project Supply Chain : Focusing on Second-tier Suppliers)

  • 박성택;이문기;유선정
    • 디지털융복합연구
    • /
    • 제12권6호
    • /
    • pp.93-103
    • /
    • 2014
  • EPC 산업군에 속하는 기업들의 주요 업무에 대한 아웃소싱비율이 급격히 높아짐에 따라 프로젝트 공급망의 성격과 협력업체와의 협업구조도 더욱 복잡해져 가고 있다. 1, 2차 또는 그 이하 협력업체의 복잡한 공급망에의 참여는 지속적인 통합노력을 필요로 한다. 본 연구는 2차 협력업체를 중심으로 기업 성과와 거래기업에 대한 관계만족도에 영향을 미치는 선행요인 분석에 초점을 둔다. 네트워크 배태성, 협업, 정보공유 및 신축성 등을 선행요인으로 설정하고, 프로젝트 공급망에의 참여실적이 있는 2차 협력업체들로부터 설문조사를 실시하여 통계적 가설을 검증하였다. 분석결과, 2차 협력업체의 공급망 주도기업과 1차 협력업체와의 협업은 성과와 만족도에 유의한 영향을 미치며, 정보공유와 신축성은 네트워크 배태성과 협업에 긍정적 영향을 미친다는 것을 확인할 수 있었다. 또한 협업에 의한 역량제고는 네트워크 배태성에 의해서도 상당한 영향을 받는다는 결과도 도출하였다.

에우독소스의 비례론과 데데킨트의 실수계에 관한 고찰 (A study on the relation between the real number system of Dedekind and the Eudoxus theory of proportion)

  • 강대원;김권욱
    • 한국수학사학회지
    • /
    • 제22권3호
    • /
    • pp.131-152
    • /
    • 2009
  • 에우독소스의 비례론이 데데킨트가 실수를 현대적으로 정의한 '데데킨트 절단'과 일치한다고 해도 과언이 아니다. 데데킨트는 2000년보다 더 앞선 에우독소스의 방법을 근거로 조사함으로써 실수체계에 대한 확고한 기초를 확립하였다고 볼 수 있다. 그래서 데데킨트의 정의에서 그리스 유산을 구별하는 것은 가치가 있을 것으로 판단된다. 그런데 에우독소스의 비례론과 데데킨트 절단 사이에는 '근본적인 차이'가 존재한다. 그리스인들은 수(number)와 공간적 크기(magnitude)사이의 구별에 생각이 미치지 못한 것으로 보인다. 본 논문에서는 비와 비례 개념에 대한 에우독소스의 설명과 '데데킨트 절단'을 통한 실수의 구조와의 관계를 살펴봄으로서 에우독소스의 비례론이 데데킨트의 실수의 완비성을 증명하기 위해 도입된 절단의 개념과 어떤 관계가 있으며 어떤 영향을 끼쳤는지를 고찰하고자 한다.

  • PDF

VANET에서 적정 전송속도를 지원하는 MAC 설계 (Design of MAC Algorithm Supporting Adaptive Transmission Rate on VANET)

  • 박상현;김남일
    • 전자공학회논문지
    • /
    • 제49권11호
    • /
    • pp.132-138
    • /
    • 2012
  • VANET(Vehicular Ad-hoc Network)을 지원하기 위해 IEEE 802.11p 규격이 표준화 진행중에 있다. 802.11 MAC 프로토콜은 전송률에 관계없이 모든 노드들에 동일한 확률의 채널 획득 기회를 부여하므로, 전송률이 낮은 노드가 상대적으로 채널 점유시간이 길어져서 전송률이 높은 노드도 전송률이 낮은 노드의 전송률로 하향 평준화되는 문제와, 노드가 많아질 경우 충돌 확률이 높아지는 문제가 있다. 본 논문에서 제안하는 알고리듬은 일단 채널을 획득한 단말기가 다른 노드와의 채널획득 경쟁의 우위를 일정 기간 유지하는 알고리듬에, 현재 전송률에 따라 적절히 연속전송 한계값을 정하는 TXOP 개념을 더했다. CW의 폭을 표준보다 더 넓게 설정여 효과적으로 충돌을 회피하면서도 대기시간을 최소화하면서 또한 채널 점유 시간에 따라 연속전송 한계값을 다르게 정하는 방법을 통해 전체 네트워크의 향상을 보이고 있다.

한옥의 공간구성과 주거공간 및 주택의장요소를 담은 아파트 단위세대 계획안 (The Plan for Apartment Unit containing the Space Organization, Residential Space and Housing Design Elements of Han-Ok)

  • 강효정
    • 한국실내디자인학회논문집
    • /
    • 제22권5호
    • /
    • pp.250-257
    • /
    • 2013
  • This study focuses on the fact that the Korean traditional design application appears as one of the trends for a planning technique to express an apartment as a healthy, clean and environment-friendly dwelling recently. Focusing on this, this study tries to apply the characteristic of Han-Ok to an apartment unit plan more compositively beyond the fragmentary design application of existing preceding researches. To do this, the space organization, residential space and housing design elements of Han-Ok are deducted through preceding researches and case studies and proposes a plan by applying this to the apartment plan with a floor plan of about $132m^2$(40 pyeong). The apartment unit plan containing the characteristic of Han-Ok proposed in this study is planned based on the floor plan of about $132m^2$(40 pyeong) which is distributed the most in the city of Seoul. It has an advantage in terms that it can be individually applied not only when a construction firm progresses business anew carrying the banner for a Korean-style apartment but also an existing residents can apply through remodelling. Meanwhile, it has a limit that the diversified space sense and the advantage of an airy Han-Ok cannot be applied to many parts of the design due to the characteristic of an apartment of diverse height change. If a measure to secure constructability and economic feasibility while reflecting diverse differences of floor-level of an apartment can be prepared in follow-up researches, much more various advantages of Han-Ok can be put into the apartment design.

Foundation Design the 151 story Incheon Tower in Reclamation Area

  • Abdelrazaq, Ahmad;Badelow, Frances;Kim, Sung-Ho;Park, Yung-Ho
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
    • /
    • pp.157-171
    • /
    • 2009
  • A 151 storey super high-rise building located in an area of reclaimed land constructed over soft marine clay in Songdo, Korea is currently under design. This paper describes the design process of the foundation system of the supertall tower, which is required to support the large building vertical and lateral loads and to restrain the horizontal displacement due to wind and seismic forces. The behaviour of the foundation system due to these loads and foundation stiffness influence the design of the building super structure, displacement of the tower, as well as the raft foundation design. Therefore, the design takes in account the interactions between soil, foundation and super structure, so as to achieve a safe and efficient building performance. The site lies entirely within an area of reclamation underlain by up to 20m of soft to firm marine silty clay, which overlies residual soil and a profile of weathered rock. The nature of the foundation rock materials are highly complex and are interpreted as possible roof pendant metamorphic rocks, which within about 50m from the surface have been affected by weathering which has reduced their strength. The presence of closely spaced joints, sheared and crushed zones within the rock has resulted in deeper areas of weathering of over 80m present within the building footprint. The foundation design process described includes the initial stages of geotechnical site characterization using the results of investigation boreholes and geotechnical parameter selection, and a series of detailed two- and three-dimensional numerical analysis for the Tower foundation comprising over 172 bored piles of varying length. The effect of the overall foundation stiffness and rotation under wind and seismic load is also discussed since the foundation rotation has a direct impact on the overall displacement of the tower.

  • PDF

폴리프로필렌 섬유보강 콘크리트의 강도 및 건조수축균열 제어특성 연구 (A Study on the Strength and Drying Shrinkage Crack Control Characteristics of Polypropylene Fiber Reinforced Concrete)

  • 오병환;이명규;유성원;백상현
    • 콘크리트학회지
    • /
    • 제8권6호
    • /
    • pp.151-161
    • /
    • 1996
  • 토목 및 건축재료로써 폴리프로필렌 섬유보강 모르터 및 콘크리트의 사용은 미국, 영국 등지에서 개발되기 시작하여 많은 연구가 진행되어 왔는데, 경제적 이점, 화학적인 안정성과 우수한 내구성으로 인해 국내에서도 그 사용이 점차 증대되고 있는 실정이다. 이러한 폴리프로필렌 섬유의 사용은 모르터 및 콘크리트가 건조나 온도에 의해 수축될 때 , 구속에 의해 발행하는 인장응력 및 균열을 제어하고, 인성의 증가와 충격, 마모, 피로에 대한 저항성을 증대시키며, 콘크리트의 내구성을 증대시키는 등의 장점을 가지는 것으로 보고되고 있다. 본 연구에서는 이러한 폴리프로필렌 섬유보강 모르터 및 콘크리트의 재료적 특성인 유동성, 압축강도, 인장강도, 휨인성뿐만 아니라 균열제어특성, 건조수측특성을 실험을 통하여 규명하고자 하였다. 본 연구 결과. 폴리프로필렌섬유의 혼입으로 인성이 증가되고 건조수축균열 및 건조수축량이 제어되고 있는 것으로 나타났다. 본 연구는 앞으로 건조수축균열제어와 인성증가를 위한 폴리프로필렌 섬유보강 콘크리트의 활용 및 설계에 기초자료를 제시할 수 있을 것으로 사료된다.

기업의 생산입지선정에 관한 비교연구: 한국과 중국 기업사례를 중심으로 (A Comparative Study on Selecting a Plant Location: Focusing on Korean and Chinese Corporation)

  • 장동철;윤민석;김종순
    • 국제지역연구
    • /
    • 제14권2호
    • /
    • pp.205-227
    • /
    • 2010
  • 생산입지의 결정으로 인한 투자, 생산 및 마케팅에 이르기까지 사업의 성과에 미치는 영향은 장기간 지속되기 때문에 합리적인 의사결정이 매우 중요하다. 특히 우리가 잘 알지 못하는 지역에서의 생산입지는 더욱 체계적이고 합리적인 방법을 적용할 필요가 있다. 본 실증연구의 대상 지역인 중국은 2050부터 미국을 앞지르는 세계최대의 경제대국을 표방하고 있는 상황임을 감안할 때, 수출의존도가 매우 높은 한국으로서는 대중국 직접 투자에 대한 연구가 매우 필요하다고 볼 수 있다. 본 논문에서는 생산입지선정에 대한 선행연구에서 중요요인으로 고려된 바 있는 요인들을 정리하고, 한국 및 중국의 기업인들 및 전문가들에 의한 브레인스토밍(brain storming)방식의 설문을 통해서 평가 항목 대상들을 선정하였다. 생산입지 결정을 비롯한 다양한 분야에서 활용되고 있는 계층분석과정(AHP: Analytic Hierarchy Process)을 이용하여 양국 기업인들 간 생산입지선정 시 고려하는 요인들에 대한 중요도 인식에 차이가 있는지 실증적으로 규명하기 위해서 중국의 상해 및 심양 지역을 대상으로 실증적인 연구를 하였다.

해양안보위협의 확산에 따른 한국해군의 역할 확대방안 (Extending Plans of the Role of ROK Navy vis-'a-vis the Expansion of Maritime Security Threats)

  • 길병옥
    • Strategy21
    • /
    • 통권30호
    • /
    • pp.63-98
    • /
    • 2012
  • Northeast Asia has a multi-layered security structure within which major economic and military powers both confront one another and cooperate at the same time. Major regional powers maintain mutually cooperative activities in the economic sphere while competing one another in order to secure a dominant position in the politico-military arena. The multifarious threats, posed by the North Korea's nuclear development, territorial disputes, and maritime demarcation line issues demonstrate that Northeast Asia suffers more from military conflicts and strifes than any other region in the world. Specifically, major maritime security threats include North Korea's nuclear proliferation and missile launching problems as well as military provocations nearby the Northern Limit Line(NLL) as witnessed in the Cheonan naval ship and Yeonpyong incidents. The ROK Navy has been supplementing its firm military readiness posture in consideration of North Korea's threats on the NLL. It has performed superb roles in defending the nation and establishing the Navy advanced and best picked. It also has been conducive to defend the nation from external military threats and invasion, secure the sea lanes of communications, and establish regional stability and world peace. In order to effectively cope with the strategic environment and future warfares, the ROK Navy needs to shift its military structure to one that is more information and technology intensive. In addition, it should consolidate the ROK-US alliance and extend military cooperative measures with neighboring countries in the Asia-Pacific region. Evolved steadily for the last 60 years, the ROK-US alliance format has contributed to peace and security on the Korean peninsula and in the Northeast Asian region. In conclusion, this manuscript contends that the ROK Navy should strive for the establishment of the following: (1) Construction of Jeju Naval Base; (2) Strategic Navy Equipped with War Deterrence Capabilities; (3) Korean-type of System of Systems; (4) Structure, Budget and Human Resources of the Naval Forces Similar to the Advanced Countries; and (5) Strategic Maritime Alliance and Alignment System as well as Domestic Governance Network for the Naval Families.

  • PDF

대형 언어 모델 기반 신경망을 활용한 강구조물 부재 중량비 예측 (Predicting Steel Structure Product Weight Ratios using Large Language Model-Based Neural Networks)

  • 박종혁;유상현;한수희;김경준
    • 한국전자통신학회논문지
    • /
    • 제19권1호
    • /
    • pp.119-126
    • /
    • 2024
  • 건물 정보 모델(BIM: Building Information Model)은 관련 기업의 개별화된 프로젝트와 학습 데이터양 부족으로 인해 인공지능(AI: Artificial Intelligence) 기반 BIM 애플리케이션 개발이 쉽지 않다. 본 연구에서는 데이터가 제한적인 상황에서 BIM의 강구조물 부재 중량비를 예측하기 위해 사전 학습이 된 대형 언어 모델을 기반으로 신경망을 학습하는 방법을 제시하고 실험하였다. 제안된 모델은 대형 언어 모델을 활용하여 BIM에 내재하는 데이터 부족 문제를 극복할 수 있어 데이터의 양이 부족한 상황에서도 성공적인 학습이 가능하며 대형 언어 모델과 연계된 신경망을 활용하여 자연어와 더불어 숫자 데이터까지 처리할 수 있다. 실험 결과는 제안된 대형 언어 모델 기반 신경망이 기존 소형 언어 모델 기반보다 높은 정확도를 보였다. 이를 통해, 대형 언어 모델이 BIM에 효과적으로 적용될 수 있음이 확인되었으며, 향후 건물 사고 예방 및 건설 비용의 효율적인 관리가 기대된다.