• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.11a
• /
• pp.50-51
• /
• 2018

Although the introduction of new materials and new construction methods and overseas materials has become more active due to the diversification of the construction market, the quality standards of waterproofing methods in Korea are insufficient. In particular, the quality control standard is applied to the KS F 2622:08 (Membrane Waterproofing layer performance test method), which is the existing standard, to prepare standards for quality control of waterproof materials, which is increased in Korea.

• Korean Journal of Construction Engineering and Management
• /
• v.22 no.6
• /
• pp.96-106
• /
• 2021

The PC structure based on the OSC (Off-Site Construction) is mentioned as a representative method of innovation in the construction industry that converts the existing construction environment from site-centered to factory production-transportation-site assembly. However, recent research on PC method has focused on improving the functions of subsidiary materials and improving the production system to increase productivity and institutional / policy R&D that can be universally applied to the life-cycle stage of ordering / design /construction is insufficient. In particular, the absence of standardized cost calculation standards makes it difficult to calculate and verify of objectified appropriate construction cost. So which is an obstacle to the activation of the PC method. In this study, the standards for construction costs of domestic and foreign PC method were surveyed and similar Construction Standard Production Rates were analyzed to confirm the product structure suitable for PC method. Subsequently, the construction procedures and input resources for each PC subsidiary materials were identified through on-site surveys to derive component for subsidiary materials, and the factors of change in the product according to the construction characteristics(height, weight of subsidiary material) were verified. As a result the standard product calculation system suitable for the site installation of the PC method for apartment was presented.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.162-169
• /
• 2022

In an attempt to disseminate modernized Korean traditional housing (Hanok), a ten-year research project was initiated in 2010 by the Korean Government to reduce the construction cost, improve the facility performance, and automate the Hanok construction industry. To meet these objectives, various research areas, including public policies, planning methods, design standards, new building materials, construction standards, maintenance procedures, advanced project management tools, and integrated IT applications have been developed. In addition, comprehensive technologies developed were applied to the ten pilot Hanok buildings to validate the real-world performance as part of the research project. To further facilitate the digital transformation of the Hanok industry by using the research results, it is required to disseminate the developed technologies in an automated and standardized manner. In particular, it is crucial to systematize and manage the interoperability of various technical data and accumulated historical data for different business functions, especially within the highly fragmented industry. In this context, this paper proposes an ontology-based Hanok information dissemination platform to enable industry-wide automated knowledge and information sharing. The system architecture, standardized historical database, and advanced analytics based on ontology web language (OWL) for the Hanok industrialization platform are introduced.

• Magazine of RCR
• /
• v.11 no.3
• /
• pp.8-13
• /
• 2016

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.417-423
• /
• 2007

This paper describes how using the XPS Document technologies of Windows Vista support and enhances interactions with the structural design and construction process. It illustrates the document workflows and the document life cycle in a typical construction base knowledge system. It provides engineers and decision makers and implementers with information about this new technology and how they can apply it to their design and construction models. The paper also highlights opportunities for the new format of data exchange in the recent efforts to develop National Management System Standards for Transportation Applications to benefit from these emerging technologies.

• Journal of the Korean Institute of Educational Facilities
• /
• v.18 no.4
• /
• pp.57-67
• /
• 2011

In this study, it did comparative analysis on the arrangement, construction and size of rooms applied in the early design stage at the time of prize-winning with the changed ground plans in the final design of those prize-winning works in design contests and BTL hold since 2007 for middle and high schools in Gyeonggi, Daejeon, Chungcheong regions. Through the analysis, this study intends to present those matters to be changed in the facilities standards of each local education office so that it can be referred to the assessment of spatial construction and proper size being planned in the future for middle and high schools and reflected flexibly in consideration of various educational conditions and characteristics of schools by regions. Furthermore, it has the objective to play a part for the establishment of much better environment of educational facilities by provision of reference materials to those matters being changed into proper ones not into the minimum ones of the school facilities standards as the national level. For case analysis, it analyzed various rooms classified by necessary spaces. Since names of rooms and spatial constructions to constitute facilities are different from each local education office and also the analysis by each room has some limitation in the changes and improvement of rooms for a wide range, it proceeded with detailed classifications of school building facilities by each necessary space.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.35 no.5
• /
• pp.85-94
• /
• 2019

The modular apartment has been completed for the first time in Korea through the national research and development (R&D) project in December 2017, and 30 households moved in. Although conditions such as technicality and constructability have to be satisfied to adopt and spread the modular apartments in the future, economic feasibility is the most important factor among the conditions. The economic feasibility of modular apartments can be compared with that of existing reinforced concrete (RC) structure apartments. It is highly important to reduce the construction cost through standardization above all. The standardization refers to establishment of national design standards and principles, and it is important for manufacturers and building companies to comply with those standards and principles. The modular construction (MC) skill in Korea is at an early adoption stage and the MC market is not widely expanded yet. Thus, the application of the MC design, which is the basis of the standardization, has not been widely accepted. However, related R&D projects are now performing mainly by the Ministry of Land, Infrastructure, and Transport to promote modular apartments in recent years and the design standardization standard (draft) is now prepared to be notified as a result of the steady research. Furthermore, pilot complexes for demonstration purpose are under construction, starting from public rental apartments. Thus, MC method-applied public rental houses will be spread in near future. This study aims to investigate the current design status in the Ga-Yang Housing as a pilot modular complex to produce and supply more economical and efficient modular houses, and analyze the problems by comparing the design standardization standards with pre-notified design standardization standards and summarize the modifications between them thereby presenting foundational data for establishment of the design standardization in the modular business industry.

• Journal of Information Management
• /
• v.28 no.4
• /
• pp.1-15
• /
• 1997

Many digital libraries are constructed for effective management and use of information resources around the world nowadays. While constructing these systems, it is possible to reduce the time, efforts and expenses through getting interoperability by applying the standards. The authors will describe the benefits of standards, development process, types of standards, standards organization, key standards for digital libraries.

• 한국가스학회:학술대회논문집
• /
• 2000.09a
• /
• pp.95-100
• /
• 2000

• Journal of the Korean Society for information Management
• /
• v.28 no.3
• /
• pp.83-101
• /
• 2011

The international standards, ISO 15489 and Family Code, recommend using functional classification method both in public and private organizations. In this study made a comparative analysis of the details of classification systems through case studies on records classification systems of a total of seven comprehensive construction companies in Korea including three large corporations and four small and medium-size businesses. Findings of this study suggester the direction of developing construction records classification system and its methodology. By summarizing classification standards derived from these case studies, key construction records classification standards were presented.