• Journal of agriculture & life science
• /
• v.50 no.5
• /
• pp.111-120
• /
• 2016

The objective of this study was to provide basic information for selecting the right timing and the right place of erosion control of stream on Gyeongsangnam-do. In order to achieve this objective, a total of 526 erosion control dams and 230 mountains stream conservation facilities on the constructed places and construction planned places for the erosion control were investigated on site, forest physiognomy, and hydrologic conditions. The erosion control dams and mountain stream conservation facilities were mostly constructed in the area, which has the sedimentary rock, 200-400m of altitude, a slope of 21~30°, and II of landslide hazard map. Among the forest environmental factors, it was only similar to the construction frequency in the areas that have small diameter class, III age class. Also, we investigated the hydrological environmental factors that determine the size and numbers of erosion control dam. The places constructed to the highest frequency were below 50ha in the area, 2.1~4.0km/㎢ of drainage density, longitudinal water system, 61~90mm of maximum precipitation per hour, and 201~300mm of day maximum precipitation. As the results, the sites and floodgate conditions between the constructed places and stream conservation facilities for the erosion control showed to be very similar. Therefore, these results indicate that the erosion control of the stream of the areas, which have the disruption of mountain peaks and the high erosion risk areas, should be used on both the erosion control dam and stream conservation facilities.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.2
• /
• pp.120-129
• /
• 2023

Marine structures are subject to damage not only from sea salt but also from the adhesion of marine microorganisms and suspended particles, which cause additional damages. In order to prevent this, periodic coating is employed in the case of vessels to maintain the necessary performance. However, it is true that periodic coating is difficult for concrete or steel support structures, and there is a risk of marine environmental pollution. In this study, authors developed an anti-fouling coating agent using eco-friendly materials that possess hydrophilic cellulose nanofibers and AKD(alkyl ketene dimer). To achieve a homogeneous mixture, the content of cellulose nanofibers was fixed at 1 %, and AKD, distilled water, and waste glass were mixed using a digital mixer and homogenizer. The contact angle of the prepared coated surface was observed to be over 130°, indicating sufficient performance even in a water droplet flow test with a 15° slope, suggesting self-cleaning capability. Furthermore, through the analysis of viscosity characteristics at different temperatures, it was confirmed that the application is feasible at room temperature. Microstructure analysis also verified that the coating agent is uniformly applied to the concrete surface.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.74-80
• /
• 2023

This study examines the characteristics of architectural review opinions as unstructured data, focusing on the most challenging risk for developers of small and medium-sized apartment projects in response to the increasing number of single-person households in Korea. Using multidimensional analysis methods, the study analyzes the review opinions of 25 projects in B City. Correspondence analysis and MDS (Multidimensional Scale) analysis show that, consistent with prior research, the keywords related to 'structure' and 'planning' dominate architectural review opinions in B City. While the MDS model's stress is very poor at 34.4%, correspondence analysis reveals that this is due to the characteristics of unstructured data in architectural reviews. In addition, the non-structured data analyzed in this study, such as architectural review opinions, exhibited a probability distribution with low kurtosis and high skewness, as they involved various combinations and occurrences of data depending on the discretion of the review committee members and the specific formats of different local governments. This often led to the emergence of keywords that differed significantly from commonly mentioned terms. Although the study has some limitations, it provides a foundation for future detailed analysis by identifying the characteristics of architectural review opinions as unstructured data.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.4
• /
• pp.17-26
• /
• 2023

To consider the risk of damage and fracture of P.C strands, the existing post-maintenance system alone has the limitations, hence it is necessary to quantitatively evaluate and predict the deterioration, durability and safety of facilities and establish a reasonable maintenance system considering the asset value of facilities. Therefore, it is worth considering a preventive maintenance plan that allows proactive measures to be taken before a major defect occurs in the temporary anchor. This study devised a preventive over tension method, reviewed its effectiveness through design and field tests, by calculating the resistance factors by performing a reliability-based optimization design. At this time, the over tension anchor method was evaluated using the ratio of the residual tension force after the fracture of P.C strands to the effective tension force before the fracture of P.C strand, followed by the resistance factor calculated by the optimal solution for each random variables using Excel solver and applying it to the limit state equations. As a result of the study, if the over tension ratio is 125% to 130%, the remaining strands showed a high resistance effect even after the fracture of P.C strand. As a result of the optimization design, it was found that it is appropriate to apply the load factor (γ) of 1.25, and the resistance factors of Φ₁, Φ₂, Φ₃ as 0.7, 0.5, 0.6.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.947-955
• /
• 2023

This study was conducted to investigate the awareness of spent nuclear fuel among residents in nuclear power plant areas and use it as basic data for establishing a disposal facility for high-level radioactive waste. 204 questionnaires collected online were analyzed using SPSS Window Ver 28.0. To verify differences between groups, t-test and one-way ANOVA were performed. And correlation analysis was conducted to confirm the relationship between variables. As a result, first, risk perception regarding nuclear-related accidents showed statistically significant differences depending on gender and educational level. The position on the construction of a permanent disposal facility for spent nuclear fuel showed a statistically significant difference depending on gender, education, and age, and the perception of the importance of each evaluation standard for establishing a spent nuclear fuel management plan showed a statistically significant difference depending on education and age. In terms of trust in information-providing institutions, trust in the National Assembly was found to be the lowest. Second, the results of the correlation analysis between variables showed that local residents are aware that an alternative to the current disposal of spent nuclear fuel is needed, and that financial support for the construction of a permanent disposal facility is needed. Therefore, in order to build a high-level radioactive waste disposal site, it is believed that it is necessary to increase trust in the government, collect opinions from local residents, and provide economic support.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.27 no.2
• /
• pp.34-44
• /
• 2024

Recently, due to abnormal climate caused by climate change, natural disasters such as floods, landslides, and soil outflows are rapidly increasing. In Korea, more than 63% of the land is vulnerable to slope disasters due to the geographical characteristics of mountainous areas, and in particular, Quarry mines soil and rocks, so there is a high risk of landslides not only inside the workplace but also outside.Accordingly, this study built a DEM using UAV and aviation LiDAR for monitoring the quarry, conducted a time series change analysis, and proposed an optimal DEM construction method for monitoring the soil collection site. For DEM construction, UAV and LiDAR-based Point Cloud were built, and the ground was extracted using three algorithms: Aggressive Classification (AC), Conservative Classification (CC), and Standard Classification (SC). UAV and LiDAR-based DEM constructed according to the algorithm evaluated accuracy through comparison with digital map-based DEM.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.270-283
• /
• 2024

Purpose: Considering the rising frequency of earthquakes in Korea, it is crucial to revise the rainfall thresholds for landslide triggering following earthquake events. This study was conducted to provide scientific justification and preliminary data for adjusting rainfall thresholds for landslide early warnings after earthquakes through soil physical experiments. Method: The study analyzed the change in soil shear strength by direct shear tests on disturbed and undisturbed samples collected from cut slopes. Also, The study analyzed the soil strength parameters of remolded soil samples subjected to drying and wetting conditions, focusing on the relationship between the degree of saturation after submergence and the strength parameters. Result: Compaction water content variation in direct shear tests showed that higher water content and saturation in disturbed samples led to a significant decrease in cohesion (over 50%) and a reduction in shear resistance angle (1~2°). Additionally, during the ring shear tests, the shear strength was observed to gradually decrease once water was supplied to the shear plane. The maximum shear strength decreased by approximately 65-75%, while the residual shear strength decreased by approximately 53-60%. Conclusion: Seismic activity amplifies landslide risk during subsequent rainfall, necessitating proactive mitigation strategies in earthquake-prone areas. This research is anticipated to provide scientific justification and preliminary data for reducing the rainfall threshold for landslide initiation in earthquake-susceptible regions.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.5
• /
• pp.339-350
• /
• 2024

In construction sites, the engine of heavy machinery is tested by practitioners who manually adjust engine settings and directly measure the output. This process has consistently raised concerns regarding time costs and the risk of incidents. To address these issues, simulations of heavy equipment are conducted using Speedgoat and the Simulink API. However, due to the varying compatibility of different versions of Speedgoat hardware and Simulink API, engineers need to have a comprehensive understanding of various Simulink APIs. It is practically challenging for engineers, who must have a deep understanding of heavy equipment structures, to also possess programming skills including API usage. Thus, this paper proposes a tool that allows inputting configuration values for heavy equipment simulation and visually outputs and logs the simulation results. The proposed tool provides functionalities to deliver configuration values, such as engine settings of heavy equipment, to the simulator model and to monitor and log the resulting simulation outputs. These functionalities have been validated through scenarios. By using the developed tool, engineers are expected to reduce the burden of learning Simulink API and focus more on understanding the structure of heavy equipment. Additionally, it is anticipated that this tool will provide a more efficient and safer working environment for heavy equipment testing on construction sites.

• Journal of Educational Research in Mathematics
• /
• v.26 no.2
• /
• pp.159-172
• /
• 2016

This study examines the approach of introduction of the real numbers through the infinite decimal, which is suggested by Lee Ji-Hyun(2014; 2015) in the aspect of the overcoming the double discontinuity, and analyses Li(2011), which is the mathematical background of the foregoing Lee's. Also, this study compares these construction methods given by Lee and Li with the traditional method using the nested intervals. As a result of analysis, this study shows that Lee Ji-Hyun(2014; 2015) and Li(2011) face the risk of the circulation logic in making the infinite decimal corresponding each point on the geometrical line, and need the steps not using the 'limit to a real number' in order to compensate the mathematical and educational defect. Accordingly, this study raises the opinion that the traditional method of defining the infinite decimal as a sequence by using the geometrical nested intervals axiom would be a appropriate supplementation.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.1
• /
• pp.261-269
• /
• 2012

Objective: The aim of this study is to develop an analysis method to extract plausible types of errors when using a smart mobile in nuclear power plants. Background: Smart mobiles such as a smart-phone and a tablet computer(smart-pad) are to be introduced to the various industries. Nuclear power plant like APR1400 already adopted many up-to-date digital devices within its main control room. With this trend, various types of smart mobiles will be inevitably introduced to the nuclear field in the near future. However nuclear power plants(NPPs) should be managed considering a big risk as a result of the trend not only economically but also socially compared to the other industrial systems. It is formally required to make sure to reasonably prevent the all hazards due to the introduction of new technologies and devices before the application to the specific tasks in nuclear power plants. Method: We define interaction segments(IS) as a main architect of interaction description, and enumerate all plausible error segments(ES) for a part of design evaluation of digital devices. Results: We identify various types of interaction errors which are coped with reasonably by interaction design using smart mobiles. Conclusion: According to the application result of the proposed method, we conclude that the proposed method can be utilized to specify the requirements to the human error hazards in digital devices, and to conduct a human factors review during the design of digital devices. Application: The proposed method can be applied to predict the human errors of the tasks related to the digital devices; therefore we can ensure the safety to apply the digital devices to be introduced to NPPs.