• 한국소음진동공학회논문집
• /
• 제19권8호
• /
• pp.802-808
• /
• 2009

In this paper, the experimental study on the identification of noise sources and noise transmission paths was carried out for the cabin noise control of construction equipment. In order to investigate noise and vibration characteristics of cabin structure, sound absorption, transmission, and radiation tests were performed using cabin assembly models. The noise/vibration source levels were obtained from the real cabins of wheel loader and excavator. Using transfer functions of cabins and real cabins' source data, cabin noise was decomposed into airborne and structureborne noise transmissions. Finally noise sources and major transmission paths were successfully identified for wheel loader and excavator's cabins.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.84-89
• /
• 2009

In this paper, the experimental study on the identification of noise sources and noise transmission paths was carried out for the cabin noise control of construction equipment. In order to investigate noise and vibration characteristics of cabin structure, sound absorption, transmission, and radiation tests were performed using cabin assembly models. The noise/vibration source levels were obtained from the real cabins of wheel loader and excavator. Using transfer functions of cabins and real cabins' source data, cabin noise was decomposed into airborne and structureborne noise transmissions. Finally noise sources and major transmission paths were successfully identified for wheel loader and excavator's cabins.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.360-368
• /
• 2010

Noise and vibration triggered by pile driving in a construction site not only give hard time to the surrounding areas but could also cause residents nearby to file civil complaints to the extent of bringing construction to a halt. To deal with this issue, construction engineers have worked strenuously to develop low noise & low vibration pile methods. A noise & vibration-free screw concrete pile method proposed in this study is one of the successful outputs. It penetrates pile underground by rotating and pressing in body of the pile to avert noise and vibration while maximizing bearing capacity. A prototype of noise and vibration-free precast screw pile method was manufactured, which is not seen anywhere in Korea and elsewhere, and have undergone pilot tests twice to determine construction method.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.535-540
• /
• 2005

In environmental impact assessment, noise impact assessment usually consists of three stages surveying the existing noise levels by measurements, predicting noise levels induced by construction works and predicting noise levels after the completion of project. When predicting noise level in urban area, this method does not consider acoustic phenomena like multi reflection, diffraction and absorption due to complex topographic configuration of building and terrains. For the purpose, a noise mapping tool is utilized to produce a series of noise maps, which are those for the present, for the works of construction and for the future. For accurate noise mapping, acoustical and topographic information is essential. Standard sound power levels and directivities of various construction equipments are required and scheduling of construction processes and locations of the equipments should be provided. In the case of exceeding legal limit, mitigation measures are applied to satisfy the legal limits and subsequent noise map is obtained and checked.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1311-1317
• /
• 2005

In environmental Impact assessment, noise impact assessment usually consists of three stages-surveying the existing noise levels by measurements, predicting noise levels induced by construction works and predicting noise levels after the completion of a project. The distance-attenuation relation of a point source, which has been used to predict the noise level due to its simplicity does not consider complex acoustic phenomena like multi-reflection, -diffraction and -absorption due to complex topographic configuration of buildings and terrains. For the consideration of such physical complexities. a noise mapping tool is adopted to produce a series of noise maps, which are those for the present, tot the works of construction and for the future. For accurate noise mapping, acoustical and topographic Information is used. Standard sound power levels and directivities of various construction equipments are need and scheduling of construction processes and locations of the equipments should be provided. In the case of exceeding legal limit, mitigation measures are applied to satisfy the legal limits and subsequent noise map is obtained and checked.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.144-145
• /
• 2010

3-D noise map of Mugue Dong of the Ulsan City has been constructed. Comparing with the measured noise level, the predicted noise level has been confirmed for its accuracy. Correction factors for better prediction result using the constructed noise map have been investigated proving that its method is useful. The procedure of noise map construction method has also been introduced using RLS-90, Cadna A.

• 한국주거학회논문집
• /
• 제12권3호
• /
• pp.149-156
• /
• 2001

Recently, with the increase of income level, many people desire to have agreeable and quiet surrounding. However, construction noise has caused much annoyance for a number of dwellers and workers in nearby construction field. It has become a very serious issue in our living environment. For the accurate evaluation of construction noise with various frequency spectrums and fluctuation characteristics, the evaluation system should reflect not only physical quantities but also the psychological respects of individual persons. With preceding study of psycho-acoustical experiments, this study attempts to survey the classification of adjectives and sound using the method of selected description and intends to get the basic data for establishment of a standard about construction noise.

• 기술사
• /
• 제33권3호
• /
• pp.30-34
• /
• 2000

In recent years, disputes are on the increase that noise and vibration by construction equipments and blasting do damage to livestock farming families around construction sites in the construction of a road or a railway. Therefore, the following ways of improvement were presented in solving the existing problems of livestock disputes. $.$ To minimize the damage of livestock farming families by effect assessment of noise and vibration in the region expected to be damaged before the start of construction $.$ To maintain a thorough management system that can reduce noise and vibration during construction work $.$ To apply an adequate measurement method of noise and vibration taking field conditions into consideration

• 한국건축시공학회지
• /
• 제14권5호
• /
• pp.467-476
• /
• 2014

최근 건설공사의 기계화로 인한 많은 장비 투입으로 인하여 주변 주민들이 현장 소음에 인한 피해보상을 요구하는 민원이 증가하고 있다. 하지만 현장소음은 예방차원이 아닌 공사 진행과정에서만 제한적으로 관리되며 민원이 발생하고 나서야 대부분의 대처가 이루어지고 있는 실정이다. 또한, 이러한 민원을 해결하기 위해서는 비용과 시간이 과다하게 소요되는데 이는 건설사에 부정적인 영향을 미치게 된다. 이에 본 연구는 착공 전부터 계획된 공사기간과 장비투입 조건을 활용하여 최적 공사비를 찾는 알고리즘을 제안하고 최적 공정표를 도출할 수 있는 스케줄링 프로세스 모델을 개발하는 데 그 목적이 있다. 또한, 이를 활용하여 현장관리자가 공사계획 수립 시 소음발생 여부에 따라 민원이 발생할 때 예측되는 비용정보 및 소음제한에 따른 공사비와 공사기간의 변화 정도를 비교 분석함으로써 보다 합리적이고 효율적인 공사 관리를 수행할 수 있도록 한다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.737-740
• /
• 2004

The interior noise reduction of construction equipment is concerned for improving the driver comfort in this study. From the baseline test, the exhaust noise gives a big contribution to the interior noise of construction equipment. And the detail noise contribution analysis of the exhaust system, the tail pipe, which is for ventilation an engine room hot air to outside, amplify the exhaust noise around operating engine RPM associated with tail pipe structural and cavity resonances. To remove the noise amplifying effects, the tail pipe has to be shorted its length. Even the noise can be attenuated the ventilation flux when using the redesigned tail pipe is reduced than the original one. Thus, a shape change of the tail pipe is additionally needed for increasing the ventilation flux and attenuating the exhaust noise using CFD technique. The CFD results of the tail pipe give a meaning full information what obstructs the ventilation flex in the current design and how changes the tail pipe.