• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.57-60
• /
• 2008

Maglev is a system that a train runs levitated above a rail. Therefore it is very important to maintain a constant levitation gap for achieving serviceability and ride comfort. This study is a cooperation research subject of the 3-1 subject, performance improvement of maglev track structures, of the Center for Urban Maglev Program in Korea, started in 2006. The aim of this study is development of rapid constructions of bridge superstructure for maglev. At present, precast deck is widely used because of its superiority to cast-in-place concrete on quality and the term of works. The research group suggested basic systems of maglev guideway with PSC-U type and trapezoidal open steel box type girder, and precast deck, cooperating with Korea Railroad Research Institute, the managing institute of the 3-1 subject. In this study, a mock-up consisted of girders, decks and rail was fabricated and test was performed for constructability, serviceability and maintenance evaluation of PSC U-type girder, precast deck, and new guide rail system.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.1
• /
• pp.131-139
• /
• 2004

When calculating bearing capacity and settlement of actual foundation from plate test result fur design and construction of shallow foundation, scale effect should be considered. But, adequate guide and test result of scale effect were not prepared yet in Korea. So, to analyze the relations of bearing capacity and settlement as the difference of loading plate sizes, model test and field loading test were performed with different loading plate on weathered-granite layer. Model tests were conducted with water content, compaction number, saturated unit weight and plate size(Dl5, 25cm) in soil-box$(2,000\times 2,000\times 1,000mm)$ formed soil layer. Field loading tests were carried out with diameters of loading plate$(D15, 25, 30, 40, 75\times 75, 140\times 210cm)$ on the same soil condition. Finally, we presented the prediction formula of bearing and settlement for computating scale offset in design of shallow foundation through result analysis of load test and numerical simulation on weathered soil and rock.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.3
• /
• pp.39-46
• /
• 2017

Purpose: Here is little information about China's operation department of general hospital in Korean medical architecture papers, which is inconvenient for scholars engaged in medical building research and comparison. Furthermore, Surgery is to provide patients with surgery and rescue sites, is an important technical department of the hospital, and then with the development of medical technology and people's trust in medical science, the role of the operating room will become increasingly important. Therefore, the purpose of this research is to analyze history, changes and definitions of the operating room and China's operation department of general hospital related laws and regulations for future research to provide effective analysis of data, and find shortcomings. Methods: This research was conducted according to the relevant laws, books, and papers of the operation department of Chinese general hospital. Results: At present hospital construction in China is in the period of rapid development and coupled with the growing medical technology, operating room layout and configuration is still in the continuous trial of continuous improvement stage. Overall, it requires more detailed guidelines to improve the quality of the operating room. Implications: Implications: It is expected that the research of this paper will provide an effective reference for the future research of the operation department of China General Hospital, which can promote and improve the work system of the operation department of China General Hospital.

• Journal of KIISE:Software and Applications
• /
• v.29 no.9
• /
• pp.619-630
• /
• 2002

The various software engineering techniques have been come out in order to cope with the software crisis since 1980's. The software Engineering has focused on the process of software component development. The process products a development guide for a quality and productive improvement of software. But, most of the methodologies assume that a new system will be constructed and reused in the future. these do not actually support efficiently how we reuse legacy system's resources and construct a new system. In this paper, we present an efficient Reengineering Process for reusing legacy systems, RUP+re, which extends and customizes RUP. Rup+re consists of Reverse Engineering Workflow, Re-Engineering Workflow and forward Engineering Process. We describe RUP+re's workflows with their own detail steps and verify them practically through the case study. So, we provide efficient guidelines to the software Reengineering process construction which reuses the resources of a legacy system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.11
• /
• pp.7870-7877
• /
• 2015

In the case of CWR (Continuous welded rail) located on the railway bridge, the CWR has additional axial force due to interaction of bridge and track. Therefore, the CWR tracks located on the bridge have to secure the safety of running train and CWR track through mitigating influence for interaction of bridge and track. The railway design guide in Korea (KR C-08080) provides a certain value for property of longitudinal friction behavior of rail fastening system that is major parameter of interaction behavior by applying European codes. However, in order to apply to domestic railway, it is necessary to review property characteristics of the rail fastening system in actual use. In this paper, the experiment for longitudinal friction behavior of rail fastener applied to concrete track on the railway bridge in Korea was carried out, and statistical characteristic for property of the rail fastener was analyzed from the result of the experiment.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.10 no.1
• /
• pp.18-26
• /
• 1998

In order to find out hydrodynamic changes due to huge complex constructions in the Keum River Estuary, two-dimensional finite element model is applied. Model results show that gate closing of the estuary dam yields tide amplifications at Kunsan Inner Port to 17 cm and 6 cm of M$_2$ and S$_2$, while 5 cm and 3 cm of amplification at Kunsan Outer Port. Tidal currents in the main channel due to stepwise flow-guide dikes construction have been simulated and show that dynamic equilibrium bottom shear stress is 0.4 N/m$\^$2/ on this Keum River Estuary. Sedimentation rates R have correlation with maximum bottom shear stress (equation omitted), R=-0.37-0.40 ln $\tau$.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.25 no.1
• /
• pp.47-61
• /
• 1997

This study was conducted to grasp the present condition of the name and the related text of the domestic laws (97 statutes, 1 examination, 1 guide, 3 ordinances, 1 leading case) in force which were connected with landscape plant and planting. Examining the general tree-planting system of America, the related foreign laws(1 constitution, 44 statutes, 31 ordinances, 6 leading cases) were arranged in the name and the text and classified by nations of regional groups and it was considered to the mutual relation with lots of laws which are scattered with the various laws. To examine the points at issue of the related domestic laws and to study the related foreign laws, the remedies for the domestic laws being at issue were proposed. That is : A change of the landscape planting concept, the introduction of the landscape planting cost compared with the total construction cost, the unification of the landscape planting ordinances as the unit of city, the clarification of the completion period for the depect of the replaced trees. putting the conservation and production of the top soil under an obligation the adoption of a licence system for the tree planting within the river area, the introduction of the allotment system for landscape architectural expenses, the encouragement of making a hedge, the settlement for the problems of the trees loss compensation, the necessity for the quality test to the landscape planting works, the intensification of the punitive rules to the illegal felling and planting of the trees in the greenzone area, the application of the Labor Standard Act to the landscape planting laborers. The laws relating to landscape plant and planting are prescribed dispersedly in the many other related laws and it is concluded to be impossible for the legislation of the singular law which is applied uniformly to the department of the tree-planting. Hereafter it should be required to analyze concretely in detail the each text of the related laws by means of the joint studies between the professional landscape architects and the lawyers.

• Plant Journal
• /
• v.13 no.4
• /
• pp.48-50
• /
• 2017

A program for analyzing the transient behaviors of industrial gas turbines was developed. Each component (compressor, combustor, turbine and ducts)of gas turbine is modeled as a fully module to enhance the expandability of the program. We used object-oriented programing for this purpose. The mass and energy balance equations are solved numerically by Multivariable Newton Raphson method. The characteristic maps for the compressor and turbine were used for predicting the performance of a gas turbine engine. Combustion in the combustor is assumed to be complete combustion. PID control is used to maintain constant rotational speed and turbine exhaust temperature by the control of the fuel flow rate and the changing of the compressor inlet guide vane angle at the same time. It was confirmed that stable control of the gas turbine was possible, even for a rapid load change.

• Journal of Digital Convergence
• /
• v.19 no.10
• /
• pp.75-86
• /
• 2021

Recently, the domestic BIPV market is expected to revitalize with the introduction of the "zero-energy building certification system(2020~)", but it is somewhat stagnant due to the rigidity of definitions in the current domestic BIPV construction standards. Also, since there is delaying revision on definition and standardization of BIPV, the system is so weak that there are cases where it has been approved as BIPV simply by installing a structure on the wall and fixing the module roughly. The damage caused by this can be passed on to consumers, and it can only create a negative perception of BIPV and jeopardize the entire market. The BIPV definition was prepared through a Delphi survey of related experts about market stagnant cause, unreasonable regulation, etc, and a revised plan was derived accordingly.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.17 no.3
• /
• pp.9-16
• /
• 2018

This research is intended to propose future research directions by identifying differences between Korea and China's public facilities at the time of introduction and presenting improvement measures by comparing the criteria for green building certification. The study focuses on the comparison of Korea's G-SEED 2016 and China's ESGB 2014. For data related to green building certification in Korea, refer to the Construction Technology Research Institute Green Building Certification Criteria 2016 v1.2 Guide for New Housing. A study on the Green Building Certification System in China referred to the Green Building Assessment Standards. Comparisons were made between G-SEED 2016 general building certification review criteria and ESGB 2014 public facility certification criteria, and certification methods, essential items and specialties for each area.