• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 가을 학술논문 발표대회
• /
• pp.133-134
• /
• 2020

The equation of end bearing capacity is applied differently depending on the type of pile, construction method, and load characteristics considering the construction standards. The bearing capacity equation of the design standard is presented in various ways according to the design conditions such as construction method and ground condition, etc. but, It does not reflect the ground strength according to the SPT-N value of weathered rock. This study analyzed the trend of allowable tip bearing capacity by pile diameter through about 480 dynamic loading tests conducted for the construction/quality management of piles for the last 6 years since 2015. The equation for the ultimate end bearing capacity per unit area according to the SPT-N value is presented. The proposed formula of ultimate end bearing capacity per unit area can be applied in the range of 15,000kN/m2 to 30,000kN/m2. The proposed formula, which complements the existing formula, enables pile design and construction/quality management.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 가을 학술논문 발표대회
• /
• pp.135-136
• /
• 2022

Defects caused by apartment houses have the term of warranty liability according to the enforcement ordinance of Acts of the Management of Apartment Houses. In case when defects occur during the term, free defect maintenance can be provided from the construction company. Yet, there occur conflicts between the construction company and residents, as to whether there occur defects or not. To resolve these conflicts, this study aimed to analyze construction classification and types that need managing, based on defects of apartment houses occurring during the term of warranty liability. This research analyzed 138,576 cases of data, as of five apartment house complexes. For the construction classification for defects of apartment houses, wooden flooring products accounted for the highest rate, followed by paper hanging, and wooden window. For the construction types of defects, torn/scratching took up with the highest rate, followed by the condition of defect in fixing and operating. In order to embody defects occurring during the term of warranty liability, into the visualization technique, this researcher utilized the word cloud method. This study will pursue the method for maintaining defects during the term of warranty liability, in the subsequent research, using the data that this research presented.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.221-225
• /
• 2015

To hoist construction workers to their working space is directly related to the productivity of building construction since hoisting tasks are carried out during the working time. In order to reduce hoisting time in the condition that the number of construction lift-cars is limited, various types of the lift-cars group operation plans such as zoning and sky-lobby have been applied. However, previous researches on them cannot be compared in the performance due to their methodological limitation, discrete-event simulation methods, and cannot be find better solution to increase the performance. Therefore, this research proposed the simulation-based optimization model combining the agent-based simulation method to the scatter search optimization methods. Using the proposed model, this paper carried out the comparison analysis on the performance of typical operation plans and also optimize an operation plans by controlling the service range of lift-cars, the size and number of service zones. In this case study, it is verified that better alternatives than typical operation plans can be exists and it is possible to increase the productivity of building construction.

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.683-684
• /
• 2015

Project Financing (PF) is the long-term financing of infrastructure and industrial projects based upon the projected cash flows of the project rather than the balance sheets of its sponsors. However, the financial institution, the subject of financing in the case of PF in Korea, the lack of validation system of business, rather than to assess the feasibility of the project, requested a credit reinforcement to the construction company, the fact is Construction Company on loans of the employer is the guarantor or debt argument commitments accordingly. As a result, PF contingent liabilities, which are indirect debt, are triggered in the construction company, not included in the financial statements, along with the disclosure standards established according to 2009 PF contingent liabilities, and major can be a management item. In this study, PF contingent liabilities is of Pearson of the index and the PF debt ratio showing the main financial ratios and risk by classifying the credit rating and contractors Ranking of construction companies in order to analyze the impact on the financial condition of the company was performed correlation analyzes, through the Pearson correlation coefficient analysis indicated quantitative or negative relationship to derive the explicit indication.

• 터널과지하공간
• /
• 제19권6호
• /
• pp.479-489
• /
• 2009

터널 굴착시 굴진면 전방의 지반상태를 사전에 파악하는 것은 터널의 안정성을 증가시킴과 동시에 시공성을 향상시켜 경제적인 터널 시공을 할 수 있도록 한다. 이에 본 연구에서는 터널 천공시 획득되는 천공데이터를 이용하여 굴진면 전방의 암반강도를 예측하고자 하였다. 이는 암반강도가 현장에서 암반분류 및 지보패턴 설계 등의 핵심인자로 가장 보편적으로 활용될 뿐만 아니라, 암반강도의 변화를 통해 굴진면 전방의 지반상태 변화를 예측하는데도 활용할 수 있기 때문이다. 이를 위해 본 연구에서는 다양한 강도 특성을 보이는 균질한 암석시험편을 대상으로 착암기 종류를 변화시켜가며 천공실험을 수행하였다. 실험결과 천공속도는 다른 천공데이터들과 착암기의 종류 및 암석의 강도에 따라 고유한 값을 보이는 것으로 나타났다. 또한, 동일한 암석에 대해 천공시 타격압이 증가하면 천공속도는 선형적으로 비례하여 증가하는 것으로 나타났다. 이러한 결과를 바탕으로 본 연구에서는 터널 시공 현장에서 착암기의 제원, 현장 계측 데이터 및 천공속도와 암반강도의 상관관계를 이용하여 터널 굴진면 전방의 암반강도를 예측할 수 있는 방안을 제안하였다.

• 한국안전학회지
• /
• 제30권1호
• /
• pp.40-46
• /
• 2015

Many construction equipment or supporting structure should be installed in a field without appropriate anchorage to cause a collapse of those. Anchor length, anchor diameter, hooked or non hooked will be made and tested in the study. This one will be analyzed and compared with the previous study in order to find out some difference, strength by strength, based on this study. Embedded re-bar and the resistant capacity against pulled out force of re bar have been tested and analyzed by concrete design strength and rebar diameter in the study. 21Mpa and 24MPa compressive strength which are used in construction practice have been applied as variables. Those rebars are composed of D13, D16. D22 which are mostly used at construction sites. The followings are summarized as conclusions.1) ductility is not increased as rebar diameter becomes larger under the condition of non-hooked anchorage.2) those are two times of displacement difference between small diameter of rebar and large one with hooked anchorage of rebar while being 1/10 times difference with non-hooked condition but, only 10% difference of maximum load are shown, not conspicuously between hooked and non-hooked condition.3) displacement related to ductility can be three(3) times decreased if only concrete compressive strength and rebar diameter become larger with heavy support weight.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1999년도 제14차 학술회의논문집
• /
• pp.73-78
• /
• 1999

This paper presents an effective construction method of adaptive multiple control systems utilizing some knowledge upon the plants. The adaptive multiple control system operates plants un-der widely changing environmental conditions. The adaptive multiple control system is composed of a family of candidate controllers together with a supervisor. The system does not require any identification schemes of environmental conditions. Monitoring outputs of the plant, the supervisor switches from one candidate controller to another, The basic ideas of adaptation are as follows: (1)each candidate controller is prepared for each environmental condition in advance; (2)the supervise. applies a sequence of speculative controls to the plant with candidate controllers just after the start of control or just after the detection of a change in the environmental condition. Each candidate controller can keep the system stable during one-step period of the speculative control and the most appropriate candidate controller for the environmental condition to which the system is exposed can be selected before the last trial of speculative control step comes to an end. We proposed a construction method of adaptive multiple control system without any knowledge of plant dynamics and applied the method to a cart-pole balancing problem and a vehicle anti skid braking system. In real applications, as we can often easily obtain a piece of knowledge upon plant dynamics beforehand, we intend to extend the method such that multiple control systems can be efficiently designed using the knowledge. We apply the new idea to the cart-pole balancing problem with variable length of the pole. The simulation experiments lead us to the conclusion that the new attempt can reduce the manpower to design the candidate controllers for adaptive multiple control systems.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회 2차
• /
• pp.21-31
• /
• 2010

Although it is important to reflect the accurate information of the ground condition in the tunnel design, the analysis and design are conducted by limited information because it is very difficult to get it practically on considering various geography and geotechnical condition. So construction management of information concept is required to manage immediately on the field condition because it is very time-consuming to establish the countermeasure of underground reinforcement and the pattern change of Bo. Therefore, when construction is on tunnel area, examination of accurate safety and prediction of behavior is performed to overcomes the limit of predicting behavior by using Artificial Neural Network(ANN) in this study. Firstly, the field data was secured. Secondly, suitable structure was made on multi-layer perceptrons among the ANN. Thirdly, learning algorithm-propagated applies to ANN. The data for the learn of field application using ANN was used by considering impact factors, which influenced the behavior of tunnel, and performing credibility analysis. crown displacement, spring displacement, subsurfacement, and rock bolt axial force are predicted at the tunnel construction and on-site application was confirmed by using ANN from analyzing and comparing with measurement value of on-site. In this study, the data from Seoul Highway $\bigcirc\bigcirc$ tunnel section was applied to the ANN Theory, and the analysis on the investigate value and the reasoning for the value associated with field application was performed.

• 콘크리트학회논문집
• /
• 제22권1호
• /
• pp.69-76
• /
• 2010

콘크리트의 수축으로 인한 균열가능성 평가에 있어서 대부분의 경우 콘크리트를 균질한 물질로 가정하는 방식으로 접근하고 있다. 그러나 이러한 방식으로 접근할 경우 불구속조건 하의 콘크리트에서 자기수축으로 인한 미세균열(micro-cracking) 현상을 평가하는 것이 불가능함과 동시에 콘크리트 내부의 균열 발생 현상을 이해하는데 한계가 있다. 이에 이 연구에서는 시멘트 모르타르 시험체를 가지고 실험적으로는 음향방출(acoustic emission) 장비를 사용하여 내부 균열 발생량을 측정 및 평가하였으며, 이론적인 접근방식의 일환으로 실제 모르타르 시험체로부터 구하여진 이차원 이미지를 사용하여 NIST에서 개발한 OOF code로 유한요소해석을 수행하였다. 실험 및 해석 결과, 모르타르의 내부에서 시멘트 페이스트상의 수축 및 골재의 내부구속으로 인하여 발생하는 미세균열 발생 현상을 보다 현실적으로 이해할 수 있었다.

• 한국건설순환자원학회논문집
• /
• 제7권3호
• /
• pp.56-61
• /
• 2012

콘크리트의 열화는 현재 전세계적인 관심 분야로서 가장 보편적인 열화원인은 염해이다. 이를 고려한 내구수명 예측기법의 개발은 토목건설 기술에 매우 중요한 부분을 차지하고 있으나, 대부분의 기존의 연구는 수명예측에 대한 기법에 집중되어 왔을 뿐, 콘크리트 표면의 미세 기후조건을 고려한 환경 분석은 매우 드문 실정이다. 그러나 콘크리트의 내구성은 표면의 특성에 의해 지배되므로, 실질적으로 표면상태에 대응한 미세 기후조건을 연구하여 환경대응 인자로 정립할 필요가 있다. 본 연구는 현장 기후조건을 계측하여 콘크리트의 미세기후조건을 해석할 수 있는 방법을 제안하였다. 이 결과는 염소이온 확산계수와 같은 재료 매개변수에 반영하여 더욱 정밀한 수치 해를 얻는데 이용되었다. 본 연구는 콘크리트의 내구성 설계기법을 개발하기 위하여, 환경인자에 대응한 매개변수를 도출하는데 이용될 수 있을 것으로 기대된다.