• Title/Summary/Keyword: Constraint Condition

Search Result 410, Processing Time 0.021 seconds

A Study on Energy Storage System(ESS) Application for Dynamic Stability Improvement and Generation Constraint Reduction (대규모 발전단지 상시제약 감소를 위한 에너지 저장장치(ESS) 적용에 관한 연구)

  • Lee, Jae-Gul;Jung, Solyung;Choi, Jang-Hum;Kim, Yong-Hak;Yoon, Yong-Beum
    • The Transactions of The Korean Institute of Electrical Engineers
    • /
    • v.66 no.11
    • /
    • pp.1554-1560
    • /
    • 2017
  • Prepare a lose of 765kV transmission route in power system operation condition, there are some Special Protection Scheme(SPS)s in Korean power system. These SPS can make some preselected generators are tripped to avoid generator overspeed. Because of many of the new large power plants are installed to existing power generation sites due to the siting problem, the number of generator tripped by SPS should be increased. But that can be a cause of system frequency change under the Under Frequency Relay(UFR) 1st pickup level 59.0Hz. Therefore generation constraint should be considered until new transmission lines are installed. In this paper, we propose the ESS application for generation constraint mitigation by frequency damping control of ESS. To analysis an effect of ESS application, we use PSS/E dynamic simulation tool, CBEST model and controller model. The proposed ESS application is applied to the empirical Korean power system.

Investigation of Leisure Constraints based on Types of Leisure Sports Activities (여가스포츠활동 유형별 여가제약 분석)

  • Hwang, Sun-Hwan;Han, Seung-Jin
    • The Journal of the Korea Contents Association
    • /
    • v.12 no.9
    • /
    • pp.422-433
    • /
    • 2012
  • The purpose of this study was to investigate leisure constraints based on the types of leisure sports activity(individual, partner, and group activities) in order to lead people to participate in and to continue their leisure sports activities. Data were collected from leisure sports participants in Seoul and Kyungki province. A total of 286 respondents were selected using the convenience sampling method. Leisure constraint's sub-dimensions for the respondents were named as facility and environment, negative perception, lack of condition, risk of injury, and lack of time. As the results of this study, first, respondents felt facility and environmental constraint the most and negative perception constraint the lowest. Second, there were differences in negative perception and lack of condition constraints based on the magnitude of participation. Finally, there were differences in facility and environment, negative perception, lack of condition, and risk of injury constraints based on the types of leisure sports activity.

Structural Analysis of High Pressure Injection Nozzle (고압 분사노즐의 구조해석)

  • 원종진;이종선;윤희중;김형철
    • Proceedings of the Korean Society of Machine Tool Engineers Conference
    • /
    • 2002.10a
    • /
    • pp.69-74
    • /
    • 2002
  • This study is object to structural analysis of high pressure injection nozzle. The finite element model was developed to compute the stress, strain for high pressure injection nozzle. For structural analysis using result from FEM code. This structural analysis results, many variables such as internal pressure, boundary condition, constraint condition and load condition are considered.

  • PDF

Age-related Changes in Multi-finger Synergy during Constant Force Production with and without Additional Mechanical Constraint

  • Park, Yang Sun;Kwon, Hyun Joon;Koh, Kyung;Shim, Jae Kun
    • Korean Journal of Applied Biomechanics
    • /
    • v.26 no.2
    • /
    • pp.175-181
    • /
    • 2016
  • Objective: The aim of this study was to investigate age-related changes of multi-finger synergy during a constant force production task with and without an additional mechanical constraint. Method: Fourteen elderly subjects (age: $78.50{\pm}4.63yrs$, height: $157.29{\pm}8.97cm$, weight: $65.13{\pm}6.93kg$) and 14 young subjects (age: $21.13{\pm}1.35yrs$, height: $171.57{\pm}8.43cm$, weight: $70.29{\pm}16.77kg$) participated in this study. The subjects were asked to place their index and middle fingers on two force transducers fixed on a small non-moving teeterboard and produce 10 N by pressing the sensors while watching force feedback on a computer screen under the no additional constraint condition (NAC). The subjects also performed the same task with an additional mechanical constraint (AC) where the subjects were asked to balance a teeterboard that could be rotated by finger forces. An uncontrolled manifold approach was used to calculate within-trial and between-trial multi-finger synergy indices, variance in uncontrolled subspace ($V_{UCM}$), and variance in subspace orthogonal to UCM subspace ($V_{ORT}$). Two-way repeated measured ANOVA was performed with the within-factor of task condition (with and without an additional constraint) and the between factor of groups (elderly and young). Results: The elderly group showed significantly increased within-trial $V_{ORT}$ in AC compared with NAC (p < .05) while the young group showed no significant difference between AC and NAC. There was no significant group difference for within-trial $V_{UCM}$. Between-trial $V_{ORT}$ remained unchanged between groups and conditions. However, between-trial $V_{UCM}$ for the elderly group significantly decreased in AC as compared to NAC, along with no significant difference for the young group. For multi-finger synergy, there was no significant group difference of within-trial synergy. However, between-trial synergy for the elderly group significantly decreased in AC as compared to NAC (p < .05). Conclusion: Our results indicate that aging decreased consistency (i.e., ability to perform the task on a moment-to-moment basis) with an additional mechanical constraint. In addition, aging was associated with decreased multi-finger synergy on a trial-to-trial basis.

Crack-tip Stress Field of Fully Circumferential Surface Cracked Pipe Under Combined Tension and Thermal Loads (원주방향 부분 관통 균열이 존재하는 직관에 인장하중과 열하중의 복합하중이 가해지는 경우의 균열 선단 응력장)

  • Je, Jin Ho;Kim, Dong Jun;Kim, Yun Jae
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.38 no.11
    • /
    • pp.1207-1214
    • /
    • 2014
  • Under excessive plasticity, the fracture toughness of a material depends on its size and geometry. Under fully yielded conditions, the stresses in a material near its crack tip are not unique but rather depend on the geometry. Therefore, the single-parameter J-approach is limited to a high-constraint crack geometry. The JQ theory has been proposed for establishing the crack geometry constraints. This approach assumes that the crack-tip fields have two degrees of freedom. In this study, the crack-tip stress field of a fully circumferential surface-cracked pipe under combined loads is investigated on the basis of the JQ theory by using finite element analysis. The combined loads are a tensile axial force and the thermal gradient in the radial direction. Q-stresses of the crack geometry and its loading state are used to determine the constraint effects. The constraint effects of secondary loading are found to be greater than those of primary loading. Therefore, thermal shock is believed to be the most severe loading condition of constraint effects.

Development of Optimal Rehabilitation Model for Water Distribution System Based on Prediction of Pipe Deterioration (II) - Application and Analysis - (상수관로의 노후도 예측에 근거한 최적 개량 모형의 개발 (II) - 적용 및 분석 -)

  • Kim, Eung-Seok;Park, Moo-Jong;Kim, Joong-Hoon
    • Journal of Korea Water Resources Association
    • /
    • v.36 no.1
    • /
    • pp.61-74
    • /
    • 2003
  • This study(II) apply to the A city by using the optimal rehabilitation model based on the deterioration prediction of the water distribution system proposed the study(I). The deterioration prediction model divides factors into 14 factors with digging and experiment and 9 factor without digging and experiment and calculate the deterioration degree. The application results of the deterioration prediction model show that a difference of the deterioration degree according to factor numbers is within 1~2%. Also, the model can predict the deterioration degree of each pipe without digging and experiment. The optimal rehabilitation model is divided into the optimal residual durability of each deterioration factor and budget constraint or not. The application result is as follow: the rehabilitation time and cost increase according to the increasing of the optimal residual durability. When compared the model with budget constraint and model without budget constraint, the former model increase the cost of total contents. In case of budget constraint, the increasing tendency is concluded that the pipe rehabilitation is executed in same budget every year in condition that every rehabilitation cost do not exceed the every year budget within the optimal residual durability.

Design and Implementation of FSQL System in Relational Database (관계형데이터베이스에서 FSQL 시스템의 설계 및 구현)

  • 김병섭;박순철
    • The Journal of Information Systems
    • /
    • v.6 no.2
    • /
    • pp.147-163
    • /
    • 1997
  • The usages of the relational database systems have been increased nowadays. However there is a constraint that the standard query language for a database system requests users to know the exact condition for a query. In this paper a FSQL(Fuzzy SQL) systems is proposed and implemented for the imprecise queries which do not include the exact condition. Moreover this system can supply the obvious results for the queries effectively. We define a simple fuzzy query language and use a method using the metadatabase to implement the FSQL system. This FSQL system can be combined with a relational database system without any painful effort.

  • PDF

A Development of Elastoplastic Tangent Modulus in Finite Strain Space (변형율 공간에서의 탄소성 강도 매트릭스 형성)

  • 주관정
    • Proceedings of the Computational Structural Engineering Institute Conference
    • /
    • 1990.04a
    • /
    • pp.70-74
    • /
    • 1990
  • The finite plasticity in strain space is viewed by formulating the consistency condition and the thermodynamic condition with respect to proposed state variables. The Naghi-Trapp work assumption is used to obtain a constraint equation, and the normality equation is formulated. Finally, an elastoplastic tangent modulus, which is based on the derived equations in strain space, is proposed.

  • PDF