• ETRI Journal
• /
• 제24권3호
• /
• pp.239-246
• /
• 2002

We investigate an alternative blind adaptive multiuser detection scheme based on a non-canonical linearly constrained constant modulus (LCCM) criterion and prove that, under the constrained condition, the non-canonical linearly constrained constant modulus algorithm (LCCMA) can completely remove multiple -access interference. We further demonstrate that the non-canonical LCCM criterion function is strictly convex in the noise-free state, and that under the constrained condition, it is also strictly convex even where small noise is present. We present a simple method for selecting the constant as well as a stochastic gradient algorithm for implementing our scheme. Numerical simulation results verify the scheme's efficiency.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2121-2125
• /
• 2003

This paper proposes a fast distributed constrained power control (FDCPC) with non-stationary relaxation factor to next power update in CDMA cellular power control system. We review unconstrained control algorithms, the distributed power control (DPC), unconstrained second order power control (USOPC) and DPC with stationary relaxation factor (DPCSRF). Under the unconstrained condition, the convergence analysis shows theoretically that the convergence rate of DPC is the fastest one. However, under the constrained control algorithms, DCPC is not the fastest one any more because of transmission power constraint. To improve the convergence speed, the DCPC with non-stationary relaxation factor (FDCPC) are proposed. Under the constrained condition, the convergence rate of FDCPC outperforms that of DCPC and CSOPC.

• 한국지반환경공학회 논문집
• /
• 제14권1호
• /
• pp.5-13
• /
• 2013

사질토 지반에 근입된 말뚝의 주변부에서는 말뚝의 수직하중에 의한 전단변형 시, 반경방향으로의 변위가 구속된다. 이러한 연직변위 구속상태에서의 전단강도는 기존의 직접전단실험으로는 모사하는데 어려움이 있다. 본 연구의 목적은 직접전단동안 연직변위를 허용하는 연직변위 허용조건(Free Normal Displacement: FND)의 직접전단실험과 연직변위를 허용하지 않는 연직변위 구속조건(Constrained Normal Displacement: CND)의 직접전단실험을 통하여 연직변위 구속여부가 전단강도에 미치는 영향을 평가 하는 것이다. 직접전단실험은 균등한 입도분포를 갖는 주문진 표준사를 사용하여, 연직변위의 구속여부에 따라 다양한 상대밀도와 초기응력조건 상태에서 수행되었다. 실험결과, CND 직접전단실험에서 얻은 전단강도는 FND 직접전단실험에서 얻은 전단강도보다 크게 나타났다. 또한, 상대밀도가 클수록 연직변위의 구속효과로 인한 전단강도의 증분이 더욱 늘어남을 보여주었다. 반면, 초기 연직응력의 증가는 구속효과로 인한 전단강도 증분의 감소로 나타나는 것을 관찰하였다. 본 연구에서는 경계부가 구속된 사질토지반의 안정성 평가 시, 전단강도에 대한 연직변위의 구속효과를 고려해야 함을 보여준다.

• Journal of Welding and Joining
• /
• 제17권1호
• /
• pp.104-115
• /
• 1999

판재의 비드 용접과정에서 열응력과 각변형의 발생기구 및 크기를 판재 단면에 대한 2차원 유한 요소해석을 통해 규명하고자 할 때 판재의 3차원 특성을 판재 길이의 크기효과로 간주하여, 구속경계조 건으로 설정함으로써 2차원 해석으로도 더욱 실제에 근접한 현상해석이 가능함을 제안하고자 하였다. 먼저 용접 입열에 의한 판재 내부의 천이 온도분포를 해석하였고, 이를 열응력 해석에 활용하였다. 2차 원 열응력 해석에 있어, 용접도중에 단면 전체가 길이 방향으로 동일한 크기의 변위를 한다고 가정하여 일정 변위를 길이 방향 경계조건으로 설정하고, 판재의 길이에 따라 각변형의 발생이 구속된다고 가정 하여, 판재의 길이에 의한 구속효과를 상당 구속력으로 간주하여 이를 단면 부재의 회전방향에 대한 경 계조건으로 설정함으로써 판재의 3차원 특성을 고려하고자 하였다. 제안된 방법에 의한 응력 분포 형태, 각변형 크기 등의 해석 결과가 기존의 2차원 해석 결과에 비해 실제에 더 근접함을 보여 주었다.

• 제어로봇시스템학회논문지
• /
• 제15권1호
• /
• pp.67-71
• /
• 2009

This paper presents a rank-constrained linear matrix inequality (LMI) approach to the design of a multi-objective controller such as $H_2/H_{\infty}$ control. Multi-objective control is formulated as an LMI optimization problem with a nonconvex rank condition, which is imposed on the controller gain matirx not Lyapunov matrices. With this rank-constrained formulation, we can expect to reduce conservatism because we can use separate Lyapunov matrices for different control objectives. An iterative penalty method is applied to solve this rank-constrained LMI optimization problem. Numerical experiments are performed to illustrate the proposed method.

• 전기의세계
• /
• 제19권2호
• /
• pp.21-23
• /
• 1970

Necessary conditions of optimal distributed parameter control systems, Hamiltons coanonical equations, welerstress condition, transversality condition and boundary condition are obtained, when the control function is constrained and the performance index takes on the general form. Also it is concluded that the lumped parameter system is the special case of the distributed parameter system.

• 동아시아경상학회지
• /
• 제7권4호
• /
• pp.41-49
• /
• 2019

Purpose - This paper empirically investigates what factors contribute to corporate investments under financial constraint condition in the Korean stock market. In the paper, tangible assets' growth rate and fixed assets' growth rate were employed as investment performance and total assets were also used for comparison purpose. Research design and methodology - Samples are constructed by manufacturing firms listed on the stock market of Korea as well as those who settle accounts in December from 2001 to 2018. Financial institutions are excluded from the sample as their accounting procedures, governance and regulations differ. This study adopted a fixed panel regression model to assess the sample construction including yearly and cross-sectional data. Results - This results support the literatures that major shareholders showed positive significance to investment in financially unconstrained firms and no significance to investment in financially constrained firms. ROA showed positive significance to investment in financially unconstrained and constrained firms, whereas firm size showed negative significance to investment in financially unconstrained and constrained firms. Debt showed no positive significance to investment in financially unconstrained firms and negative significance to investment in financially constrained firms. Conclusions - This paper documented evidence that ROA and firm size are important factors to investment irrespective of firms' financial constraints. And this paper also supports that major shareholders give positive impact to investments in financially unconstrained firms. This means that financial constraints itself rule corporate' investment decision in financially constrained firms.

• 한국정밀공학회지
• /
• 제14권11호
• /
• pp.58-68
• /
• 1997

The residual stresses in injection-molded plastic parts can be divided into two, i.e., the flow-induced residual stress produced in flowing stage and the thermally-induced residual stress produced in cooling stage. Especially, the main source for the defect in the final parts, such as warpage, is known to be the thermally-induced stresses. For the freely quenched samples the structures of residual stresses and bire-fringence have been investigated by many researchers extensively. However, the boundary condition for free quenching was found to be improper to study actual injection molding process. In the present study a datailed structure of the residual stresses and birefringence produced under constrained quenching has been investigated experimentally. In constrained quenched samples a similar pattern but much less stress values than that for the freely quenched samples has been found in the case of the thickness of 1.0 mm. Howvere, in the case of the thickness of 4.0mm, totally different stress profile has been found experimentally. Suprisingly uniform birefringence throughout whole thickness has been found for all the cases of constrained quenching. Finally, to explain the mechanism to produce the final residual stresses and bire-fringence some preliminary numerical results including free volume theory have been introduced briefly.

• 한국안전학회지
• /
• 제22권6호
• /
• pp.27-34
• /
• 2007

Static or dynamic elastomeric O-ring seals are installed between joining parts, and play key roles of high pressure-tightening. Sealing performance and structural safety of the O-ring are dependent on groove design, plain diameter, squeeze and applications such as pressure and temperature. In this study, to solve O-ring problem squeezed and highly pressurized under laterally one-sided constrained condition, hyperelastic FE analyses are performed, and FE results are compared with measured ones by computer-aided tomography, deformed shape and extrusion depth of the O-ring. Through the comparisons, FE analysis technique was verified. In order to evaluate design sensitivity, Taguchi method was used to select FE analysis cases. Adjustment parameters are clearance gap, groove comer radius, plain diameter and squeeze. By means of verified FE analysis technique, it has been analysed how the parameters have effects on contact stress fields, internal stress fields, and extrusion depths. Sealing performance has been evaluated based on contact stress fields and contact widths, and structural safety on internal stress and strain, extrusion lengths.

• Journal of applied mathematics & informatics
• /
• 제7권2호
• /
• pp.517-525
• /
• 2000

A constrained rational cubic spline with linear denominator was constructed in [1]. In the present paper, the sufficient condition for convex interpolation and some properties in error estimation are given.