• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.401-412
• /
• 2022

In this study, we investigated the design methods of satellite constellations to conduct near-real-time surveillance reconnaissance of the Korean Peninsula. Also, we designed satellite constellations utilizing the Walker-Delta method and repeat-ground-track method, and taking into account the target area and the feasible number of satellites. The constrains of the Electro-Optical and Synthetic Aperture Radar equipment were also considered in performance analysis. As a result, the designed constellation has mean revisit time of less than 30 min which enables near-real-time surveillance reconnaissance of the Korean Peninsula. This research provides the strategy to design the satellite constellation for reconnaissance. Furthermore, it contributes to suggesting an operating strategy for micro-satellites constellation and guidelines for establishing space force.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.195-202
• /
• 2007

A differential space-frequency block code - orthogonal frequency division multiplexing (SFBC-OFDM) scheme as a multiple-input multiple-output (MIMO) transmission technique for next-generation digital multimedia broadcasting (DMB) is proposed in this paper. A linear decoding method for differential SFBC, which performs comparably to the ML decoding method, is derived for the cases of two or four transmit antennas. A simple table lookup method is proposed to improve the efficiency of the encoding/decoding process of DSFBC for the case of non-constant modulus constellations. A DMB MIMO channel model, developed by extending the 3GPP MIMO model to fit DMB environments, is used to compare BER performances of differential space block code schemes for various channel environments. Simulation results show that the differential SFBC-16QAM scheme using either four transmit antennas with one receive antenna or two transmit antennas with two receive antennas achieves a performance gain of 12dB than that of the conventional DQPSK scheme, even with a data rate twice faster.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.257-266
• /
• 2005

Many multi-modulus blind equalization algorithms (MMA) have been presented in the past to overcome the undesirable high misadjustment exhibited by the well-known constant modulus algorithm. Some of these MMA schemes, specifically tailored for quadrature amplitude modulation (QAM) constellations, have also been proved to fix the phase offset error without needing any rotator at the end of the equalizer stage. In this paper, a new multi-modulus algorithm is presented for QAM signals. The contribution lies in the technique to incorporate the sliced symbols (outcomes of decision device) in the multi-modulus-based weight adaptation process. The convergence characteristics of the proposed sliced multi-modulus algorithm (S-MMA) is demonstrated by way of simulations, and it is shown that it gives better steady-state performance in terms of residual inter-symbol interference and symbol-error rate. It has also been shown that the proposed algorithm exhibits lesser steady-state misadjustment compared to the best reported MMA.

• Proceedings of the IEEK Conference
• /
• 2000.06a
• /
• pp.240-243
• /
• 2000

In this paper, new Multi-Modulus blind Equalizer Algorithms for QAM signal set is propsed and analyzed and its performance is evaluated. The MMA algorithm combines the benifits of RCA and CMA. A new Dual-mode blind Algorithms for QAM signal set is derived. The concept of this algorithms is based on the Dual-Mode algorithm and the MMA algorithm. In order to analyze and evaluate the performance of new MMA algorithms, computer simulation are performed for the nonsquare QAM signal constellations. Form the simulation results, we can verify that new MMA algorithms converges very fast comparing to conventional MMA algorithm.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.6
• /
• pp.2446-2462
• /
• 2016

In this paper, a frequency domain Expectation-Maximization (EM)-based channel estimation algorithm for Space Time Block Coded-Orthogonal Frequency Division Multiplexing (STBC-OFDM) systems is investigated to support higher data rate applications in wireless communications. The computational complexity of the frequency domain EM-based channel estimation is increased when higher order constellations are used because of the ascending size of the search set space. Thus, a search set reduction algorithm is proposed to decrease the complexity without sacrificing the system performance. The performance results of the proposed algorithm is obtained in terms of Bit Error Rate (BER) and Mean Square Error (MSE) for 16QAM and 64QAM modulation schemes.

• Journal of Communications and Networks
• /
• v.5 no.2
• /
• pp.174-183
• /
• 2003

Space-Time (ST) codes are known to provide high transmission rates, diversity and coding gains. In this paper, a tight upper bound on the error probability of ST codes over rapid fading channels is presented. Moreover, ST codes suitable for rapid fading channels are presented. These codes are designed using the QPSK and 16-QAM signal constellations. The proposed codes are based on two different encoding schemes. The first scheme uses a single trellis encoder, whereas the second scheme uses the I-Q encoding technique. Code design is achieved via partitioning the signal space such that the design criteria are maximized. As a solution for the decoding problem of I-Q ST codes, the paper introduces a low-complexity decoding algorithm. Results show that the I-Q ST codes using the proposed decoding algorithm outperform singleencoder ST codes with equal complexity. The proposed codes are tested over fading channels with different interleaving conditions, where it is shown that the new codes are robust under such imperfect interleaving conditions.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1792-1799
• /
• 1990

Two cases of block coded phase/frequncy modulations are investigated. minimum Euclidean distances are calculated as the function of modulation index h and rotation angle \ulcorner in the cases of 2-FSK/4-PSK and 2-FSK/8-PSK. Method of signal set partitioning is described, especially for the case of 2-FSK/8-PSK. The results are compared with S.I. Sayegh's work and shown better performance. For example, with simple parity check and repetition codes, we can get coding gain of 3 dB in the case of 2-FSK/4-PSK with block length n=4. We get 5.33 dB in the case of 2-FSK/8-PSK with n=4. And it is believed that we can get higher coding gain with proper combinations of block code and n-FSK/m-PSK type channel signal constellations.

• Journal of information and communication convergence engineering
• /
• v.16 no.1
• /
• pp.6-11
• /
• 2018

It is important to find the random estimation points in wireless sensor network. A link quality indicator (LQI) is part of a network management service that is suitable for a ZigBee network and can be used for localization. The current quality of the received signal is referred as LQI. It is a technique to demodulate the received signal by accumulating the magnitude of the error between ideal constellations and the received signal. This proposed model accepts any number of random estimation point in the network and calculated its nearest anchor centroid node pair. Coordinates of the LQI sphere are calculated from the pair and are added iteratively to the initially estimated point. With the help of the LQI and weighted centroid localization, the proposed system finds the position of target node more accurately than the existing system by solving the problems related to higher error in terms of the distance and the deployment of nodes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.8
• /
• pp.65-69
• /
• 2012

We introduce a rotated square QAM constellation with low peak-to-average-power ratio (PAPR) for coordinate interleaved orthogonal design (CIOD). The proposed signal constellation has much lower PAPR than the ordinary square QAM constellations for CIOD while it keeps almost the same coordinate product distance (CPD).

• ETRI Journal
• /
• v.34 no.4
• /
• pp.617-620
• /
• 2012

The denoising mapping with the closest-neighbor clustering (CNC) method in denoise-and-forward two-way relay channels is studied. Specifically, the symmetry of the constellations in source terminals A and B is utilized to reduce the complexity of the CNC method. The specific case considered first to illustrate how the constellation symmetry works in the CNC method is the quadrature phase-shift keying constellation in A and B and the single-antenna deployment in all terminals. This case study shows that an enormous complexity reduction can be achieved. Next, the result is extended to multiple-antenna scenarios and square quadrature amplitude modulations.