• Transactions of the Korean Society of Mechanical Engineers B
• /
• 제21권6호
• /
• pp.773-778
• /
• 1997

The present study investigates the effect of the shear rate-dependent thermal conductivity of non-newtonian fluids on the heat transfer enhancement in a 2:1 rectangular duct flow. An axially-constant heat flux and a peripherally-constant temperature boundary conditions(H1) was adopted for a top-wall-heated configuration. The present numerical results of Nusselt numbers for SRDC(Separan) show heat transfer enhancement over those of SRIC. The Nusselt numbers increased linearly as Reynolds numbers increased. The heat transfer enhancement is due to an increased thermal conductivity near the wall, which is attributed to the shear rate-dependence.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제25권3호
• /
• pp.399-407
• /
• 2001

The Surface, generated by end milling operation, is deteriorated by tool runout, vibration, friction, tool deflection, etc. Especially in cornering cut, surface accuracy is usually determined by varying cutting forces, which causes tool deflections. Cutting conditions like feed rate is usually kept constant during machining a part, which causes dimensional error in severe cutting. Cornering cut is a typical example of deterioration of surface accuracy when constant feed rate is applied. Therefore it becomes important to develop NC post processor module to determine optimal cutting conditions in various cutting situations. In this paper, cutting force is predicted in cornering cut with flat end mill and feed rate is determined by constraining constantly resultant force. Also some control characteristics of CNC machining center are evaluated.

• Journal of Biosystems Engineering
• /
• 제25권2호
• /
• pp.151-158
• /
• 2000

Detachment rate of mature fruits of the Lycium chinense Mill with various frequency, amplitude, and shaking time using an experimental vibratory system was analyzed. The experimental vibratory system was designed such that the frequency, amplitude, and shaking time could be controlled easily. The detachment rate increased as the frequency increased at constant amplitude and increased as the amplitude increased at constant frequency. The contents of the detached immature fruit, however, also increased as the frequency and amplitude increased, which was undesirable for the detachment efficiency considering the only mature 900 rpm and amplitude of 35 m for the shaking time of three seconds.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제4권4호
• /
• pp.171-178
• /
• 1996

DCB(pure mode I) and CLS(mixed mode) tests were performed to investigate the effect of fracture mode on the interlaminar fracture of composite laminate. Mode I critical strain energy release rate was found to be $133J/m^2$ from the DCB test and total strain energy release rate decreased from $1, 270J/m^2$ as thickness ratio(tl/t) varied from 0.333 to 0.667 from the crease from the CLS test. Crack length had no effect on the total strain energy release rate and load was almost constant during the crack growth of the specimen which had the specific thickness ratio. Crack initiated when the stress of the strap ply reached constant stress $42kgf/mm^2$ which was found to be independent of the thickness ratio.

• Journal of Radiation Protection and Research
• /
• 제12권1호
• /
• pp.54-60
• /
• 1987

The quasi-exposure rate and the quasi-effective energy of the natural radiation in the field at 47 monitoring points around nuclear power plants have been studied with the pair filter thermoluminescence dosimeter system. The results of the six years observation showed that the relationship between the quasi-exposure rate $X_q$, and quasi-effective energy $E_q$ can be represented as a hyperbolic function: $X_q=A+C/(E_q-B)$, where the constants A and B correspond to the quasi-exposure rate of cosmic-rays and the minimum quasi-effective energy of natural radiation, respectively. Furthermore, the constant A is in close agreement with the values obtained by using ionization chambers and scintillation detectors. The constant B is approximately 0.68 MeV, closely corresponding to the mean energy of the photons emitted from natural uranium.

• Bulletin of the Korean Chemical Society
• /
• 제34권4호
• /
• pp.1145-1152
• /
• 2013

The rate constant of alkaline fading of methyl green ($ME^{2+}$) was measured in the presence of non ionic (TX-100), cationic (DTAB) and anionic (SDS) surfactants. $ME^{2+}$ hydrolyses and fades in neutral water and in this work we search the effects of surfactants on its fading rate. The rate of reaction showed remarkable dependence on the electrical charge of the used surfactants. It was observed that the reaction rate constant decreased in the presence of DTAB and SDS and increased in the presence of TX-100. Binding constants of $ME^{2+}$ to TX-100, DTAB and SDS and the related thermodynamic parameters were obtained by classical (or stoichiometric) model. The results show that binding of $ME^{2+}$ to TX-100 and DTAB are two-region and that of SDS is three-region. Also, the binding constants of $ME^{2+}$ to surfactant molecules in DTAB/TX-100 and SDS/TX-100 mixed solutions and their stoichiometric ratios were obtained.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국정보통신학회 2017년도 춘계학술대회
• /
• pp.641-644
• /
• 2017

Usage of LTE(Long Term Evolution) technology is expanded to industrial an emergency service field beyond commercial communications of mobile internet focused on smartphone. In this paper, transmission performance of LTE technology be supplied to various service area is analyzed on the level of application traffics. Performance is evaluated with compter simulation based NS(Network Simulator)-2, CBR(Constant Bit Rate), VBR(Variable Bit Rate File) traffic is used as simulation target. Results and methods of this paper can be used for research and developmemt of LTE based networks.

• Archives of Pharmacal Research
• /
• 제2권1호
• /
• pp.35-47
• /
• 1979

In order to increase the dissolution rate of furosemide(4-choro-N-furfury1-5-sulfamoy1 anthranilic acid_, various ratio coprecipitates with water-soluble polymers, such as polyvinylpyrrolidone and polythylene glycol, of different molecular weight, were prepared and quantitatively studied by comparing their dissolution characteristics of furosemide at powder state and at nondisintegrating disk state containing constant surface area at various temperatures and rotating velocities. The dissolution characteristics of furosemide from pure furosemide disks and 1:2(w/w) furosemide-PVP coprecipitate disks were in accordance with Noyes-Nernst equation and the rate constant of dissolution was proportional to the square root of rotating velocity of the disks. The intrinsic rate of dissoluton at 150 rpm, 37.deg.C was $2.21{\times}10^{-7}$ for the PVP 10, 000 COPRECIPITATE, $1.64{\times}10^{-7}$ for the PVP 40, 000 coprecipitate, and$ 1.44 {\times} 10^{-7}$for the PVP 360, 000 corprecipitate, while the rate was $1.27{\times}10^{-8}M/cm^{2} min$ for pure furosemide, repectively. The activation energy of dissolution was about 17, 000 for furosemide and about 7, 300 cal/mole for the 1:2 furosemide PVP 40, 000 coprecipitate, respectively.

• KSBB Journal
• /
• 제6권2호
• /
• pp.147-156
• /
• 1991

Diazotized chitin (CHITN) was synthesized reacting with NaN3 and HCl to alkaline hydrolyzed chitin for the support of immobilized enzyme. Immobilized $\beta$-glucosidase on diazotized chitin(CHITN-Gase) was produced reacting with glutaraldehyds as bifunctional reagent. CHITN-Gase activities were determined reacting with p-nitrophenol-$\beta$-D-glucopyranoside in plug flow reactor as a reference. Optimum temperature, optimum pH, reaction constant and deactivation rate were determined with variation of flow rate and H/D. The particle size of immobilized enzyme in the best was, 35 mesh (CHITN35-Gase). The optimum conditions of immobilized enzyme were $70^{\circ}C$ in temperature and 5.0 in pH. Diameter and flow rate of plug flow reactor in the best was 8.5mm in diameter and 0.8ml/min in flow rate. Reaction constant was mainly influenced by electrostatic force. The best glucose hydrolizing activities of CHITN3 5-Gase was 3.34$\times$10-5 M/1. while that of native-$\beta$-glucosidase was 2.44$\times$10-5 M/1.

• Proceedings of the KIEE Conference
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1560-1561
• /
• 2006

A high rate deposition sputtering process of magnesium oxide thin film in oxide mode has been developed using a 20 kW unipolar pulsed power supply. The power supply was operated at a maximum constant voltage of 500 V and a constant current of 40 A. The pulse repetition rate and the duty were changed in the ranges of $10{\sim}50\;kHz$ and $10{\sim}60%$, respectively. The deposition rate increased with rising incident power to the target. Maximum incident power to the magnesium target was obtained by the control of frequency, duty and current. The deposition rate of a moving state was 9 nm m/min at the average power of 1.5 kW.