• JSTS:Journal of Semiconductor Technology and Science
• /
• v.8 no.1
• /
• pp.66-79
• /
• 2008

Several oxides have recently been reported to have resistance-switching characteristics for nonvolatile memory (NVM) applications. Both binary and ternary oxides demonstrated great potential as resistive-switching memory elements. However, the switching mechanisms have not yet been clearly understood, and the uniformity and reproducibility of devices have not been sufficient for gigabit-NVM applications. The primary requirements for oxides in memory applications are scalability, fast switching speed, good memory retention, a reasonable resistive window, and constant working voltage. In this paper, we discuss several materials that are resistive-switching elements and also focus on their switching mechanisms. We evaluated non-stoichiometric polycrystalline oxides ($Nb_2O_5$, and $ZrO_x$) and subsequently the resistive switching of $Cu_xO$ and heavily Cu-doped $MoO_x$ film for their compatibility with modem transistor-process cycles. Single-crystalline Nb-doped $SrTiO_3$ (NbSTO) was also investigated, and we found a Pt/single-crystal NbSTO Schottky junction had excellent memory characteristics. Epitaxial NbSTO film was grown on an Si substrate using conducting TiN as a buffer layer to introduce single-crystal NbSTO into the CMOS process and preserve its excellent electrical characteristics.

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1122-1127
• /
• 2019

In this study, the bio-impedance of the human body is able to obtain a lot of information by monitoring the pathological and physiological conditions of clinical and biological tissues. The four electrode method system for biometrics measured the potential difference between two electrodes and the other two electrodes were used as electrodes for current flow. The newly developed dry gold electrode measured impedance from 1 Hz to 50 kHz and produced reproducible results. To verify the impedance measurement of the dry electrode, the pitting was performed using an equivalent circuit model of the bioelectrode skin, and the effectiveness was demonstrated through modeling. Fixed electrode types have a constant position of the electrodes attached during the measurement, so that a stable measurement can be obtained, thereby minimizing the error.

• Journal of Ecology and Environment
• /
• v.31 no.4
• /
• pp.341-344
• /
• 2008

We investigated the responses of red squirrels to pine nuts (Pinus koraiensis) treated with Lithium Chloride (LiCl) and the potential of the chemical for inducing conditioned taste aversion (CTA) in red squirrels. In red squirrels, nut feeding declined dramatically during the first 4 days after feeding with LiCl-treated nuts. The ratio of LiCl-treated nuts eaten to total nuts eaten declined from the $1^{st}$ day in LC-1 and the $2^{nd}$ day in LC-2, along with a general reduction in quantity eaten. Thus, feeding with LiCl-treated nuts induced CTA from the 2nd day after feeding, and CTA remained constant until the $4^{th}$ day, but disappeared on the $5^{th}$ day. The squirrels ate an average of $757.0{\pm}106.1mg$ (n = 2, range $682.0\sim832.0$) of LiCl before dying on the $16^{th}$ day of the study. The lethal dose of LiCl was 2.32 mg LiCl/g body weight, and the average amount of LiCl needed to induce CTA was $23.0{\pm}4.24mg$ (20 mg in LC-1 and 26 mg in LC-2).

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.7
• /
• pp.1713-1721
• /
• 1994

Intermetallic-matrix composites(IMCs) have the potential of combing matrix properties of oxidation resistance and high temperature stability with reinforcement properties of high specific strength and modulus. One of the major limiting factors for successful applications of these composite at high temperatures is the formation of interfacial reactions between matrix and ceramic reinforcement during composite process and during service. The purpose of the present investigation is to develop a better understanding of the nature of creep fracture mechanisms in a $Ni_{3}Al$ composite reinforced with both $TiB_{2}$ and SiC particulates. Emphasis is placed in the roles of the products of the reactions in determining the creep lifetime of the composite. In the present study, creep rupture specimens were tested under constant ranging from 180 to 350 MPa in vacuum at $760^{\cric}C$. The experimental data reveal that the stress exponent for power law creep for the composite is 3.5, a value close to that for unreinforced $Ni_{3}Al$. The microstructural observations reveal that most of the cavities lie on the grain boundaries of the $Ni_{3}Al$ matrix as opposed to the large $TiB_{2}/Ni_{3}Al$ interfaces, suggesting that cavities nucleate at fine carbides that lie in the $Ni_{3}Al$ grain boundaries as a result of the decomposition of the $SiC_{p}$. This observation accounts for the longer rupture times for the monolicthic $Ni_{3}Al$ as compared to those for the $Ni_{3}Al/SiC_{p}/TiB_{2} IMC$. Finally, it is suggested that creep deformation in matrix appears to dominate the rupture process for monolithic $Ni_{3}Al$, whereas growth and coalescence of cavities appears to dominate the rupture process for the composite.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.641-644
• /
• 2000

In vitro true digestibility of cup-plant (Silphium perfoliatum L.) is higher than other alternative forages and comparative to alfalfa (Medicago sativa L.) even at the high neutral detergent fiber (NDF) concentration. This study was conducted to determine whether the digestion kinetic parameters of cup-plant could explain high in vitro true digestibility of cup-plant at the several NDF levels. Cup-plant and alfalfa were both collected in Arlington and Lancaster, Wisconsin to meet the NDF content within 40 to 50% range. The collected samples were incubated with rumen juice to investigate the digestion kinetics at 3, 6, 9, 14, 20, 28, 36, 48, and 72 h. Kinetics was estimated by the model $R=D_0\;e-k(t-L)+U$ where R is residue remaining at time t, and $D_0$ is digestible fraction, k is digestion rate constant, L is discrete lag time, and U is indigestible fraction. Parameters of the model were estimated by the direct nonlinear least squares (DNLS) method. Digestion rate and potential extent of digestion were not statistically different in either forage. However, alfalfa had shorter lag time (p<0.05). The indigestible fraction increased with maturation in alfalfa and in cup-plant (p<0.05). The ratio of indigestible fraction to acid detergent lignin (ADL) was higher in cup-plant than in alfalfa (p<0.05). From the results, alfalfa is probably digested more rapidly than cup-plant, however, cup-plant maintains higher digestibility with maturation due to a relatively slower increase of indigestible fraction in NDF.

• Journal of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.158-164
• /
• 1991

The reduction mechanism at a mercury electrode of o-cresolphthalexon(OCP) in strongly alkaline supporting electrolytes has been investigated by several electrochemical techniques. The radical formed after first one electron reduction uptake, dimerizes. The result of cyclic voltammetric investigation demonstrated the reversible nature of the electron transfer and standard rate constant was $3.27{\times}10^{-2}$ cm/sec. The apparent irreversible behavior of the second wave is a result of the existence of a fast protonation following the second electron transfer. At low concentration of OCP(< $1{\times}10^{-4}$M), cathodic current were remarkably adsorptive properties. Prolonged electrolysis was carried out at controlled potential of -1.85V, original violet color of the solution becames progressively weaker, and then colorless solution. The final product of an exhaustive electrolysis is electro-inactive. The appearence of four steps may be explained by the fact that the reduction of OCP elucidated ECEC mechanism.

• Animal cells and systems
• /
• v.2 no.4
• /
• pp.477-481
• /
• 1998

Previous studies have postulated that isometric animals exert similar locomotory capacity (speed, distance) because the amount of energy available for the motion would be the same regardless of body mass (m). To test propriety of this theory, we examined body shape and take-off potential of two frog species, Rana nigromaculata (powerful jumpers) and Bombina orientalis (slow hoppers). Morphological measurements included thigh muscle mass (indicative of total muscle force), hindlimb length (L, determining acceleration distance), and interilial width (shaping take-off motion). To gauge locomotory capacity, take-off speed (v) and take-off angle ($\theta$) were measured from video analyses, and jump distance (R) and take-off Power ($P_{t}$ ) were calculated from equations $R=V^{2}sin2\theta/g$ and ($P_{t}$＝$㎷^{3}/2L$(where g is the gravitational constant). Scaling exponents of morphometric variables for both species were 0.96-1.11 for thigh muscle mass, 0.28-0.29 for hindlimb length, and 0.30-0.36 for interilial width. Scaling exponents of locomotory performance for the two species were -0.01-0.14 for take-off speed, 0.24-0.31 for jump distance, and 0.66-0.84 for take-off power. The results demonstrate that the frogs of this study showed isometric body shape within species, but that take-off response changed allometrically with body mass, indicating that these data did not fully support the previous proposition. An exception was found in take-off speed of B. orientalis, in which the speed changed little with body mass (slope＝-0.01). These findings suggest that the energy availability approach did not properly explain the apparent allometric relations of the take-off response in these animals and that an alternative model such as a power production approach may be worth addressing.

• Journal of the Korean Magnetics Society
• /
• v.8 no.1
• /
• pp.21-26
• /
• 1998

The temperature dependence of the magnetoimpedance (MI) effect is important both for scientific study and for thermal stability of MI sensor. We have performed the measurement of MI effect in amorphous $Co_{66}Fe_1Ni_1B_{14}Si_{15}$ (Metglas 2714 A) ribbon from a cryogenic chamber where the temperature of the sample can vary from 10 K to 300 K. The ac current was fixed at 10 mA for all measured frequencies ranging from 100 KHz to 10 MHz. The magnetoimpedance ratio (MIR) was revealed the drastic increment as a function of MIR (T) = MIR (0) exp(cT$^2$) where c is a constant. The measured MIR values at room temperature are usually 2-3 times larger than the data measured at 10 K for all measured frequencies. However, the shapes of the MIR curves are remained. This result shows the potential application of the MI effect for a temperature sensor. The frequency dependence of MIR has shown the typical tendency where the maximum values of MIR are increasing ans also the shapes of MIR curves are getting broader as the measured frequency increases.

• Journal of the Korean Magnetics Society
• /
• v.25 no.2
• /
• pp.58-65
• /
• 2015

This paper deals with the generating characteristic analysis of permanent magnet linear generator (PMLG) with double-sided Halbach magnet array mover and three phases concentrated stator windings by using analytical method. On the basis of a magnetic vector potential and Maxwell's equations, governing equations are obtained, and magnetization modeling for Halbach magnet array is performed analytically by using the Fourier series. And then, we obtain electrical parameters such as back-EMF constant, resistance, and coil inductance based on magnetic field calculations. Finally, analytical results for generating performance are confirmed by comparing with finite element analysis results.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.3
• /
• pp.79-88
• /
• 2003

For the construction of PC bridge piers the implementation of 1992 seismic provisions, longitudinal steels were practically lap-spliced in the plastic hinge region. Experimental investigation was conducted ductility of evaluate the seismic earthquake-experienced reinforced concrete columns with 2,5 aspect ratio. Six test specimens were mode with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes that could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading simultaneously under a constant axial load, P＝0.1f$\_$ck/A$\_$g/. Residual seismic performance of damaged columns was evaluated and compared to that of the corresponding original columns. Test results show that PC bridge piers with lap-spliced longitudinal steels appeared to fail at low ductility. This was due to the debonding of the lap splice, which resulted from insufficient development of the longitudinal steels. The specimens externally wrapped with composite FRP straps in the potential plastic hinge region indicated significant improvement both in flexural strength and displacement ductility.