• Title/Summary/Keyword: Constant normal stress condition

검색결과 34건 처리시간 0.025초

응력, 하중, 변위제어 방식의 암석 절리면 전단시험기의 개발 (Development of Stress, Load and Displacement Controlled Direct Shear Apparatus for Jointed Rock)

  • 김대영;천병식;서영호;이영남
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 봄 학술발표회 논문집
    • /
    • pp.471-477
    • /
    • 1999
  • A new stress, load and displacement controlled direct shear apparatus has recently been developed at the Hyundai Institute of Construction Technology This direct shear apparatus is capable of testing of rock joint under constant normal stiffness, constant normal stress or constant normal load boundary conditions. This paper describes this direct shear apparatus and illustrates results of shear tests at constant normal stress condition, constant normal load condition and constant normal stiffness condition with dental stones which have a same joint roughness and unconfined compressive strength.

  • PDF

일정수직강성(CNS) 조건에서 절리면 전단거동에 관한 연구 (A Study on Shear Behaviors for the Rock Joint in the Constant Normal Stiffness Condition)

  • 김용준;이영휘;김선기;김주화
    • 터널과지하공간
    • /
    • 제15권5호
    • /
    • pp.330-337
    • /
    • 2005
  • 전단하중을 받는 암반의 전단특성은 절리면의 구조적인 특징뿐만 아니라 암반 주변의 경계조건에 의해서도 영향을 받는다. 암반블록의 경계조건은 절리면이 받고 있는 응력상태를 기준으로 4가지로 구분할 수 있다. 일반적으로 주로 사용되는 CNL 조건의 전단시험에서 얻어지는 전단강도는 다른 경계조건에서 얻어지는 것보다 낮은 전단강도를 나타내며 그 거동도 다른 것으로 나타났다. 본 연구에서는 일정수직하중(CNL) 시험결과를 정규화한 그래픽 방법을 이용하여 일정수직강성(CNS) 조건의 전단거동을 모사할 수 있었다.

Graphic 방법을 이용한 암반의 경계조건에 따른 절리면 전단거동 예측 (Prediction for Shear Behavior of the Rock Joints with Boundary Conditions using the Graphic Method)

  • 김용준;이정학;송범;염형진
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2003년도 추계학술대회 논문집(II)
    • /
    • pp.466-471
    • /
    • 2003
  • The characteristics of a rock joint which influence the stability of rock mass structures, such as the cut slopes and the tunnels, are largely controlled by the conditions of the rock joint as well as its boundary conditions. Boundary conditions can be represented by assuming that the deformability(or stiffness) of the rock mass surrounding the joints is modelled by a spring with stiffness. A new direct shear apparatus is developed in this study, which adapts a servo control system using PID algorithm. This apparatus can be used to investigate the various aspects of shear characteristics of the rock joints at conditions of constant normal stress and constant normal stiffness and so on. It is possible that the behavior under the constant normal stiffness condition can be predicted by the normalized graphic method with results obtained from the tests in the constant normal stress condition.

  • PDF

톱니형 인공 절리의 시멘트 그라우팅 전.후의 전단거동에 관한 연구 (A Study on the Shear Behaviors of Non-Grouted and Cement Grouted Sawtoothed Artificial Joints)

  • 이영남;천병식;김대영
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2000년도 가을 학술발표회 논문집
    • /
    • pp.721-728
    • /
    • 2000
  • The shear behavior of sawtoothed artificial joints grouted with cement milk was investigated in the laboratory under constant normal stress conditions. Tests were conducted on joints with asperities having inclinations of 16.7$^{\circ}$ and 26.6$^{\circ}$, compresive strengths having 15MPa and 47MPa under a given range of normal stresses varying from 0.76 to 1.91 MPa and at a free condition of pitching, rolling and dilatancy. Results show that the effect of asperities on shear strength increase is significant up to asperity height to grout thickness (t/a) ratio of 0.3∼1.0. Increase of cohesion is the main cause of shear strength increase in cement grouted sawtoothed artificial joints.

  • PDF

거칠기와 수직응력에 따른 암석 절리면의 전단거동 (The Influence of Rock Joint Roughness and Normal Stress on Shear Behaviour)

  • 이명호;김종우;장광택
    • 터널과지하공간
    • /
    • 제17권3호
    • /
    • pp.186-196
    • /
    • 2007
  • 본 연구에서는 거칠기와 수직응력이 절리면의 전단거동에 미치는 영향을 검토하기 위하여 30개의 자연암반 절리 시료를 대상으로 실험을 실시하였다. 3차원 레이저 거칠기 측정장치를 이용하여 절리면의 거칠기 정보를 측정하였으며, 시료들의 거칠기에 따라 10개씩 세 가지 그룹으로 분류하였다. 다음으로 수직응력을 다섯 단계로 변화시켜가며 전단실험을 실시함으로써 최대전단강도, 잔류전단강도, 전단강성, 팽창특성 등을 조사하였다. 절리면의 거칠기가 증가함에 따라 최대전단강도는 증가하였으며, 거칠기가 최대전단강도에 미치는 영향은 수직응력이 작은 경우에 더욱 크게 나타났다. 또한 절리면의 거칠기가 증가할수록 잔류전단강도도 점차 증가하였다. 전단강성은 거칠기 및 수직응력이 커짐에 따라 증가하는 것으로 나타났으나, 팽창각은 수직응력이 증가할수록 감소하였고, 동일한 수직응력하에서는 절리면의 거칠기가 커질수록 증가하였다.

국내 현장타설말뚝의 주면 접촉부에 대한 일정강성도 전단시험 (CNS Shear Tests for Granite-Concrete Interlace of drilled shaft)

  • 조천환;이명환;김성회;이혁진;유한규
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2003년도 봄 학술발표회 논문집
    • /
    • pp.147-152
    • /
    • 2003
  • The purpose of this paper is to develope an understanding of fundamental mechanism of shear behaviour between granite and concrete interfaces. The interface of pile socketed in rock can be modeled in laboratory tests by resolving the axisymmetric pile situation into the two dimensional situation under CNS(constant normal stiffness) direct shear condition. In this paper, the granite core samples were used to simulate the interface condition of piles socketed In granite. The samples were prepared in the laboratory to simulate field condition, roughness(angle, height), stress boundary condition, and then tested by CNS direct shear tests. This paper gives some points about shearing behaviour of socket piles into domestic granite through the analysis of CNS tests results.

  • PDF

화강암 절단면과 콘크리트 부착면에 대한 일정강성도 전단시험 (Shear Tests Under Constant Normal Stiffness for Granite-concrete Interface)

  • 조천환;이명환;유한규
    • 한국지반공학회논문집
    • /
    • 제20권1호
    • /
    • pp.5-12
    • /
    • 2004
  • 본 연구는 암반에 근입된 현장타설말뚝의 화강암과 콘크리트의 부착면에서의 전단거동을 이해하려는 데 있다. 암반에 근입된 현장타설말뚝의 전단거동을 실내에서 실험하기 위해서는 현장에서의 전단거동을 모델링 해야 한다. 따라서, 말뚝의 축방향 대칭성을 고려해 암반에 근입된 전단면을 2차원으로 모델링함으로써 일정수직강성도(conctant normal stiffness; CNS) 조건의 전단시험을 실시할 수 있다. 본 논문에서는 국내 화강암을 대상으로 거칠기, 암의 강도, 응력경계조건 등을 고려하여 암-콘크리트 접촉부에 대한 일정수직강성도 전단시험을 수행하였다. 실험결과 각 변수(요철부의 경사각 및 높이, 수직강성도)에 따른 전단특성(첨두전단강도, 전단응력, 수직응력)은 물론 팽창현상(dilation) 등을 관찰할 수 있었다. 시험결과에 따르면 첨두 전단강도는 요철부의 경사각이 증가할수록, 그리고 수직강성도가 증가할 수록 증가하는 것으로 나타났으며, 팽창량은 요철부의 각도가 클수록 수직강성도가 작을수록 크게 나타났다.

선형 압축기 익렬에서 발생하는 익단 누설 와류내의 레이놀즈 응력 분포 (I) -입구 유동각 변화의 영향- (Distribution of the Reynolds Stress Tensor Inside Tip Leakage Vortex of a Linear Compressor Cascade (I) - Effect of Inlet Flow Angle -)

  • 이공희;박종일;백제현
    • 대한기계학회논문집B
    • /
    • 제28권8호
    • /
    • pp.902-909
    • /
    • 2004
  • A steady-state Reynolds averaged Navier-Stokes simulation was conducted to investigate the distribution of the Reynolds stress tensor inside tip leakage vortex of a linear compressor cascade. Two different inlet flow angles ${\beta}=29.3^{\circ}$(design condition) and $36.5^{\circ}$(off-design condition) at a constant tip clearance size of $1\%$ blade span were considered. Classical methods of solid mechanics, applied to view the Reynolds stress tensor in the principal direction system, clearly showed that the high anisotropic feature of turbulent flow field was dominant at the outer part of tip leakage vortex near the suction side of the blade and endwall flow separation region, whereas a nearly isotropic turbulence was found at the center of tip leakage vortex. There was no significant difference in the anisotropy of the Reynolds normal stresses inside tip leakage vortex between the design and off-design condition.

암반절리면에서의 그라우팅 효과 (Grouting Effect of Rock Joint)

  • 이영남;천병식;김대영
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2000년도 추계학술대회 논문집
    • /
    • pp.265-270
    • /
    • 2000
  • AESTRACI: The shmr behior of sawtoothed artrjicial joints grouted with cement milk rm investiguted in the lahotconstant normal stress conditions. Tests were amducted on joints with asperities h i n g inclinations cf 16.7" and 26.6" ,strengths h i n g 15MPa and 47MPa under a given nmge of n o d stresses wrying frcm 0.76 to 1.g MPa md at a freepitching, rolling and dihtmuy. Results show that the gect of asperities on shmr strength increme is signifamt up to as,to grout thidness (t/a) mtio 4 0.3-1.0. Increme of ahesim is the nmn muse cf shmr strength increme in cemmtoothed artificial iointsed artificial ioints

  • PDF

개의 미용 스트레스에 의한 Cortisol농도의 변화 (Changes of Serum Cortisol Concentrations by Clipping Stress in Dogs)

  • 이상길;허주형;육진엽;강정부
    • 한국임상수의학회지
    • /
    • 제22권2호
    • /
    • pp.136-140
    • /
    • 2005
  • This experiment is designed to determine the relationship between groomers' activities and stress. The experimenter worked with 2 female dogs and 3 male dogs owned by clients. They were 22 months old on an average and weighed 5.5kg on an average. The concentration of cortisol in blood was measured with radioimmunoassy(RIA). The concentration of cortisol in blood was high in the morning and evening and was low in the afternoon. In a normal condition, the concentration of cortisol in blood was $1.4{\mu}g/dL$, which increased to $4.98{\mu}g/dL$ after 1 hr of grooming, and then returned to normal at the termination of grooming. The survey shows that grooming acted as a stressor, which seems to have an influence on the health of dogs. So it is absolutely necessary that systematic and constant research should be conducted to reduce stress at the time of grooming.