• 제목/요약/키워드: Constant Pressure System

검색결과 570건 처리시간 0.022초

폴리머 적층 시스템과 실험계획법을 이용한 다양한 공극 패턴에 따른 PCL 인공지지체의 제작 연구 (Fabrication of PCL Scaffolds According to Various Pore Patterns Using Polymer Deposition System and Design of Experiments)

  • 사민우;최선웅;이재욱;김종영
    • 대한기계학회논문집A
    • /
    • 제41권7호
    • /
    • pp.645-653
    • /
    • 2017
  • 골 조직 공학에서 폴리카프로락톤(Polycaprolactone, PCL)은 생분해성 및 생체적합성의 합성고분자로서 인공지지체의 제작에 널리 이용되고 있는 생체재료 중 하나이다. 인공지지체의 제작에서 지지대폭은 생체 내/외 실험에서 공극 크기뿐만 아니라 공극률에도 영향을 미치기 때문에 지지대 폭을 일정하게 유지하는 것이 조직 재생에 중요하게 고려되는 부분이다. 본 연구에서는 온도, 공압, 이송 속도, 그리고 노즐 팁 높이를 이용하여 체계적이고 효율적인 인공지지체 제조 공정이 될 수 있도록 실험 계획법을 통해 최적 공정 조건을 탐색하였다. $150{\mu}m$ 지지대 폭을 가지는 PCL 인공지지체를 제작하는 것이 목표였으며, 한 가지의 공극 패턴이 아니라 다양한 공극 패턴에 따른 PCL 인공지지체를 제작하는 연구를 수행함으로써 모든 실험 그룹에서 지지대 폭이 일정함을 증명하였다.

다양한 지반 및 지진하중 조건을 고려한 해저철도 터널의 동적 수치모델 분석 (Analysis on dynamic numerical model of subsea railway tunnel considering various ground and seismic conditions)

  • 곽창원;박정준;유민택
    • 한국터널지하공간학회 논문집
    • /
    • 제25권6호
    • /
    • pp.583-603
    • /
    • 2023
  • 최근 기계식 터널 굴착기술의 발전과 수압을 받는 해저철도 터널의 특성 상 쉴드TBM 공법이 해저철도 터널 설계 및 시공에 널리 적용되고 있다. 해저철도 터널은 일반적인 지중응력상태에서 거동하지 않고 외부 수압이 상시재하되는 상태이며 지진 시 지진파의 증폭에 의한 영향을 받게 된다. 특히 연약지반, 연약토사-암반 복합지반, 단층파쇄대 등 다양한 지반조건 하에서 작용하는 지진하중은 터널 변위 및 지보재 응력의 급격한 변화를 초래하여 터널 안전성에 큰 영향을 미친다. 또한 지진하중의 주기특성, 지진파형, 최대가속도 등의 재하조건에 따라 지반 및 터널의 동적 응답이 달라지며 이는 지반조건과 결합하여 더욱 복잡한 지반-터널 구조물계의 거동을 보여주게 된다. 본 연구에서는 해저철도 터널의 동적거동 평가를 위하여 수압을 고려하여 지반-터널 구조물계 전체를 유한차분해석 기법으로 모델링 하고 상호 지진 시 구조물 응답을 분석하였다. 해저철도 터널의 지진 시 동적 거동에 영향을 미치는 주요 인자는 지반조건과 지진파이므로 가상 지반조건에 따라 총 6가지의 해석 Case를 설정하였다. 가상 지반조건은 해석 대상영역의 지반이 모두 토사(풍화토)인 경우(Case-1), 모두 암반(경암)인 경우(Case-2), 터널 진행방향(종방향)으로 토사와 암반의 복합지반인 경우(Case-3), 암반 내 폭이 상대적으로 좁은 파쇄대(w = 2.0 m)를 터널이 통과하는 경우(Case-4), 터널 진행방향(종방향)으로 연약토사와 암반의 복합지반인 경우(Case-5), 암반 내 폭이 상대적으로 넓은 파쇄대(w = 10.0 m)를 터널이 통과하는 경우(Case-6)으로 구분하여 각각 모델링을 수행하였다. 해석 결과 지진에 의한 수평변위는 지반물성 증가에 따라 커지는 경향을 나타내었으나 주변 지반의 구속효과와 강성 세그먼트로 결합된 쉴드터널 구조물의 특성으로 인하여 다소 억제되는 경향도 함께 관찰되었다. 세그먼트의 부재력은 변위 발생 경향과는 달리 지반 강성이 약할수록 현저히 증가하는 경향을 나타내었으며 오히려 변위 억제 효과에 따른 부재력 증가가 뚜렷하게 관찰되는 특성을 확인하였다.

이온교환막 연료전지용 원통형 막 가습기의 열 및 물질전달특성 기초 연구 (Basic Analysis of Heat and Mass Transfer Characteristics of Tubular Membrane Humidifier for Proton Exchange Membrane Fuel Cell)

  • 배호준;안국영;이영덕;강상규;유상석
    • 대한기계학회논문집B
    • /
    • 제35권5호
    • /
    • pp.473-480
    • /
    • 2011
  • 막 가습기는 다른 가습장치와는 달리, 기생 전력의 손실이 없고 가습 성능이 우수하여 이온교환막 연료전지의 외부 가습을 위해 적용되고 있다. 원통형 막 가습기는 특히 가습성능에 비해 요구 체적이 매우 작기 때문에, 수송용 및 가정용 이온교환막 연료전지에 적용된다. 막가습기의 최적 설계를 위한 열 및 물질 전달 특성에 대한 이해가 필요하지만, 아직 다양한 연구가 이루어지고 있지 않다. 본 연구에서는 원통형 막가습기의 열 및 물질전달 특성을 이해하기 위한 특성 실험을 수행하였다. 기존의 습도 측정계는 비정상 가습 특성 실험에 한계가 있고, 정상 상태에서도 고온 다습한 환경에서는 오차가 크기 때문에 본 연구에서는 습증기 응축법을 이용하였다. 가습기의 정상상태 특성을 확인하기 위해 압력과 온도 변화에 대한 실험을 수행하였으며, 비정상 특성을 확인하기 위해 순간 유량 변화 시의 가습 성능을 측정하였다. 본 연구에서는 이상의 기초 실험을 통해서 막 가습기의 성능에 영향을 미치는 주요 인자를 확인하였으며, 원통형 막가습기의 기초적인 열 및 물질 전달 특성을 이해하였다.

Ba-ferrite 박막의 제조 및 자기적 특성에 관한 연구 (The Preparation and Magnetic Properties in Ba-ferrite Film)

  • 서정철;김대성;하태양;이재광
    • 한국자기학회지
    • /
    • 제13권2호
    • /
    • pp.64-69
    • /
    • 2003
  • Si 기판 위에 $\alpha$-Fe$_2$O$_3$을 하지층으로 하는 Ba-ferrite 박막을 pulsed laser deposition system으로 제조하여 결정학적 및 자기적 성질을 X선 회절, SEM, Mossbauer 분광법 및 VSM을 사용하여 연구하였다. $\alpha$-Fe$_2$O$_3$박막은 Si 기판위에 PLD를 이용하여 기판온도 400 $^{\circ}C$, 산소압력 0.1 Torr로 5분간 증착 하였고 그 위에 두께를 달리하여 Ba-ferrite 박막을 제조하였다. Ba-ferrite 결정은 가늘고 긴 모양의 결정립들로 형성되었으며 두께에 따라 그 모양과 상태가 변화하였다. Mossbauer 분광법으로부터 Ba-ferrite 결정내의 Fe 원자의 스핀 방향은 두께가 얇을수록 하지층의 영향으로 기판에 수직으로 정렬하려는 경향을 보이고 있음을 확인하였다. 자기이력곡선의 각형비 역시 두께가 얇을수록 더 크며 이러한 특성은 수평에 비하여 수직의 경우가 더 강하게 나타났다. 보자력 역시 같은 경향을 보이나 포화자화의 값은 수평의 경우에 더 큰 값을 나타내었다. 결정구조는 Magnetoplumbite로서 두께가 작아질수록 결정상수 $\alpha$는 감소하고 c는 증가하는 경향을 보였다.

$\alpha-Fe_2O_3$ 박막에서 스핀 재 정렬에 관한 연구 (The Spin Reorientations in $\alpha-Fe_2O_3$ Thin Film)

  • 서정철;이호선
    • 한국자기학회지
    • /
    • 제11권1호
    • /
    • pp.21-25
    • /
    • 2001
  • Si 기판 위에 $\alpha$-Fe$_2$O$_3$ 박막을 pulsed laser deposition system으로 제조하여 결정학적 및 자기적 성질을 X선 회절 및 Mossbauer 분광법을 사용하여 연구하였다. 박막의 제조조건은 laser의 출력 5.128 W/$cm^2$, 산소의 압력 0.1 torr, 기판의 온도 30$0^{\circ}C$에서 가장 이상적이었으며 이를 공기 중 80$0^{\circ}C$에서 1일간 열처리하였다. 입자는 크기는 길이 200~300nm, 폭 70-150 nm정도의 타원체로 기판에 비스듬히 누운 형태를 취하고 있으며 결정은 육방정계 형태의 corundum 구조로서 결정상수는 a = 5.03 0.05 $\AA$, c = 13.73$\pm$0.05 $\AA$로 측정되었다. 원자의 스핀 방향은 감마선 방향(기판에 수직 방향)에 대하여 평균적으로 Morin 변환 이하에서는 38$^{\circ}$, 그 이상에서는 48$^{\circ}$의 각을 이루며 특정한 방향을 선호하고있는 것으로 나타났다. Morin 변환은 200 K에서 실온가지 넓은 온도 범위에서 일어나며, c-축에 대한 원자의 스핀 방향은 48$^{\circ}$에서 80$^{\circ}$정도의 변화만이 관측되었다.

  • PDF

역삼투압을 이용한 전착도료 정제공정폐수처리에 관한 연구 (A Study on the Treatment of Wastewater from Ion Removal Process for Purifying Electrocoat Paint in the Bath by Use of Reverse Osmosis)

  • 김진성
    • 멤브레인
    • /
    • 제8권2호
    • /
    • pp.77-85
    • /
    • 1998
  • 알루미늄 전착공정중 도료정제장치에서 발생하는 도료계 폐수(COD$_{Mn}$ 1,500~2,000 ppm)를 역삼투압을 이용하여 농축수는 전착조로 보내 재사용하고 반면 투과수는 세정수로 사용할 목적으로 시스템을 설계하여 현장 설치하였다. 역삼투압시스템은 폴리아미드 재질의 나권형 모듈(직경 102 mm$\times$ 길이 1,016 mm)3개를 직렬로 연결하고 시스템회복율 30%, 운전압력 11.5 kg/$cm^2$, 그리고 실온에서 3일 주기로 발생하는 폐수량 20 m$^3$을 회분식조업으로 처리하였다. 원폐수를 42시간 연속가동하여 5배까지 농축하는 실험기간중 거의 일정한 투과 flux 390 l/m$^2$-hr을 유지하였고 그 투과수질이 COD$_{Mn}$ 300 ppm으로 나타났다. 이는 도료정제장치의 잔존 도료성분을 회수하기 위해 사용되는 순수대신 세정수로 사용하기에 적합하였다. 그리고, COD$_{Mn}$ 제거율은 83$\pm$5%이었으며, 각 용제성 분별 제거율은 feed 농도의 증가에 따라 감소하였는데 5배 농축시 ethyl cellusolve, butyl cellusolve 그리고 n-butanol은 각각 79, 87 그리고 70%로 나타났다.

  • PDF

Stability of the growth process at pulling large alkali halide single crystals

  • V.I. Goriletsky;S.K. Bondarenko;M.M. Smirnov;V.I. Sumin;K.V. Shakhova;V.S. Suzdal;V.A. Kuznetzov
    • 한국결정성장학회지
    • /
    • 제13권1호
    • /
    • pp.5-14
    • /
    • 2003
  • Principles of a novel pulse growing method are described. The method realized in the crystal growing on a seed from melts under raw melt feeding provided a more reliable control of the crystallization process when producing large alkali halide crystals. The slow natural convection of the melt in the crucible at a constant melt level is intensified by rotating the crucible, while the crystal rotation favors a more symmetrical distribution of thermal stresses over the crystal cross-section. Optimum rotation parameters for the crucible and crystal have been determined. The spatial position oi the solid/liquid phase interface relatively to the melt surface, heaters and the crucible elements are considered. Basing on that consideration, a novel criterion is stated, that is, the immersion extent of the crystallization front (CF) convex toward the melt. When the crystal grows at a <> CF immersion, the raised CF may tear off from the melt partially or completely due to its weight. This results in avoid formation in the crystal. Experimental data on the radial crystal growth speed are discussed. This speed defines the formation of a gas phase layer at the crystal surface. The layer thickness il a function of time a temperature at specific values of pressure in the furnace and the free melt surface dimensions in the gap between the crystal and crucible wall. Analytical expressions have been derived for the impurity component mass transfer at the steady-state growth stage describing two independent processes, the impurity mass transfer along the <> path and its transit along the <> one. The heater (and thus the melt) temperature variation is inherent in any control system. It has been shown that when random temperature changes occur causing its lowering at a rate exceeding $0.5^{\circ}C/min$, a kind of the CF decoration by foreign impurities or by gas bubbles takes place. Short-term temperature changes at one heater or both result in local (i.e., at the front) redistribution of the preset axial growth speed.

화학평형과 평형이동에 대한 대학생과 교사들의 개념조사 (Identifuication of College Student's And Teacher's Conceptions for Chemical Equilibrium and Equilibrium Shift)

  • 박종윤;박현주
    • 대한화학회지
    • /
    • 제46권3호
    • /
    • pp.265-278
    • /
    • 2002
  • 본 연구에서는 화학평형과 평형이동에 관한 대학생들과 교사들의 개념형성 정도를 조사하기 위하여 개념검사 문항을 이용하여 서울지역 대학교 1학년 학생53명, 3학년 학생 28명, 4학년 학생 26명과 고등학교 교사10명에게 지필검사를 실시하였다. 개념검사 문항의 ?뼁育?기체의 부분압력과 농도 계산, 기체상 반응의 평형상수 계산과 비활성 기체 첨가에 의한 평형이동, 약산 수용액에서의 농도 계산과 물 또는 공통이온 첨가에 의한 평형이동에 관한 것으로 르샤틀리에 원리의 적용이 어려운 상황에서 반응지수의 변화를 이용하여 평형이동 방향을 예측할 수 있는가에 초점을 두었다. 응답 내용을 분석한 결과, 교사와 물리화학을 배운 3학년 학생들의 정답률이 일반화학을 배운 1학년 학생들이나 물리화학을 배운지 1년 정도 지난 4학년 학생들보다 유의미하게 높은 것으로 나타났다. 그리고 선수 개념인 부분압력과 농도 계산에 대한 정답률은 높았으나 이와 동일한 조건에서 화학평형이동 방향을 예측하는 문항의 정답률은 낮게 나타나 계산 능력보다는 반응지수를 이용한 평형이동의 예측에 대한 개념 형성이 부족한 것으로 드러났다.

유전자알고리즘을 이용한 막오염 시계열 예측 연구 (A Study on Time Series Analysis of Membrane Fouling by using Genetic Algorithm in the Field Plant)

  • 이진숙;김준현;전용성;곽영주;이진효
    • 대한환경공학회지
    • /
    • 제38권8호
    • /
    • pp.444-451
    • /
    • 2016
  • 기존에는 lab-scale 연구에서 이론식을 기초로 막오염 모델식을 구성하였지만, 이러한 모델식은 여과, 역세, 배출이 연속적으로 이루어지는 실규모 현장에 적용하기에는 적합하지 않았다. 본 연구는 실제로 인천시 G-정수사업소에서 발생되는 배출수 처리를 위해 연속자동 운전되고 있는 침지막 공정을 대상으로 진행되었다. 정유량 조건에서 막오염 관리지표를 막간차압(Trans-Membrane Pressure, TMP)으로 결정하고 침지막 공정의 주요 운전변수인 총 투과유량과 조 내 SS농도를 독립변수로 하여 TMP의 시계열 예측을 시도하고 예측 가능성 및 적용성을 평가하였다. 유전자알고리즘을 이용한 시계열 예측모형을 구성한 결과, TMP 예측값이 펄스주기 형태와 경시적인 증가 추세 두 가지를 모두 반영하고 있어서 만족할 만한 결과가 나왔다. 두 번의 검증 결과, 선형회귀 방식으로 TMP 실측치와 예측치의 상관성(유의성)을 나타내면 각각 $r^2=0.721$, $r^2=0.928$ 수준이다. 본 연구에서는 하절기 자료를 활용하여 모델링 작업을 수행하였지만 추후에 연속자료가 더 쌓이면 같은 절차로 모델링 작업을 반복해서 더 높은 신뢰도의 예측모형을 구성할 수 있고 이를 실제 현장에 적용하여 2~3일 정도의 단기예측을 수행한다면 실제로 막공정을 에너지 효율적으로 운영하는데 도움이 될 것으로 사료된다.

서울지하철 범죄 실태에 대한 범죄심리학적 연구 (Study on the Realities in Seoul Subway Crimes: Criminal Psychology)

  • 임상곤
    • 시큐리티연구
    • /
    • 제7호
    • /
    • pp.233-285
    • /
    • 2004
  • ‘Defined legally as a violation of law' (Sutherland, E. H. Principles of Criminology, Lippincott, Chicago, 1939) Crime within the group is essentially and primarily antisocial in that the criminal who is welfare of his group acts instead against it and breaks the principles of social solidarity not merely by not doing what these principles prescribe, but by doing something exactly opposites. Any program set up to attack crime and delinquent behavior at their sources. A program of his nature needs the constant and comprehensive collaboration of psychiatrists, social works, educations, lawmakers, and public officials, since crime is a social problem and it should be treated as such. Some crime preventives which should be mentioned are as follows, (1) The insurance that every child will be decently born and that his home life be socially and economically adequate; without socially mature parents the chid is handicapped at the start; thus parental education, integrated with the public school system, should be developed now. (2) A more meaningful educational program which would emphasize ideals of citizenship, moral integrity, and respect for the law and the police. (3) A periodic check made for potential delinquents throughout the public schools and treatment provided if possible; and if not, proper segregation in institutions. (4) Careful attention paid to press, movies, and radio so that crime may no longer appear to be glamorous. This can be done by women's clubs, civic bodies, and other educational groups exerting pressure on the movie syndicates and broadcasting companies to free their productions of the tawdry and lurid characteristics of crime and criminals. Aggression associated with the phallic stage of development, The child ordinarily comprehends sexual intercourse as an aggressive and sadistic act on the part of the male, and specifically on the part of the penis. Evidence that the penis is phantasied as a weapon of violence and destruction come from unconscious productions of normal adults. Limerick, for instance, often refer to the penis as square, or too large, etc., so that intercourse is dangerous and painful for the partner, This may wall be a projection of the male's own fear of coitus. A certain portion of the death-instinct always remains within the person; it is called 'primal sadism' and according to Freud is identical with masochism. 'After the chief part of it(the death instinct) has been directed outwards towards objects, there remains as a residuum within the organism the true erotogenic masochism, which on the one hand becomes a component of the libido and on the other still has the subject itself for a object.' Criminalism, compulsive-neurotic frequent repetition of criminal acts in a compulsive manner. Like most symptoms of the compulsive-neurotic, such antisocial act are closely rated to feelings of hostility and aggression, often against the father. Because these acts are symptomatic, they afford only temporary relief and are therefore repeated. One patient with compulsive-neurotic criminalism was apprehended after breaking into hardware store and stealing money. He later confessed to many similar incidents over the preceding two years. At the same time it was apparent that he stole only for the sake of stealing. He did not need the money he thus obtained and had no special plans for using it.

  • PDF