• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.324-327
• /
• 2005

An electrophoretic display using $TiO_2$ particles is the most promising candidate because it offers various advantages such as ink-on-paper appearance, good contrast ratio, wide viewing angle, image stability in the off-state and extremely low power consumption. The core technology of electrophoretic display is the dispersion controlling of $TiO_2$ nano particles in nonaqueous solution. To prepare an ink for electronic paper using electrophoretic properties of $TiO_2$ nano particles, cyclohexane with low dielectric constant and transparency, polyethylene for producing polymer coating layer which reduces apparent gravity of $TiO_2$, and $TiO_2$ powders were mixed together by planetary-mill. The zeta-potential value of $TiO_2$ particles in cyclohexane was measured about -40mV, but was measured over -110mV by dispersant attached to polyethylene-coated $TiO_2$ surface. Prepared electronic ink was filled in cross patterned micro-wall with $200{\mu}m$ in width and $40{\mu}m$ in height on ITO glass designed by photolithography. The response time of electronic paper evaluated by mobility of $TiO_2$ particle between micro-walls was measured 0.067sec, but the drift velocity from reflectance wave form during reverse from of electronic ink was measured 0.07cm/sec.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.242-242
• /
• 2006

Increasingly complex tasks are performed by computers or cellular phone, requiring more and more memory capacity as well as faster and faster processing speeds. This leads to a constant need to develop more highly integrated circuit systems. Therefore, there have been numerous studies by many engineers investigating circuit patterning. In particular, PCB including module/package substrates such as FCB (Flip Chip Board) has been developed toward being low profile, low power and multi-functionalized due to the demands on miniaturization, increasing functional density of the boards and higher performances of the electric devices. Imprint lithography have received significant attention due to an alternative technology for photolithography on such devices. The imprint technique. is one of promising candidates, especially due to the fact that the expected resolution limits are far beyond the requirements of the PCB industry in the near future. For applying imprint lithography to FCB, it is very important to control thermal properties and mechanical properties of dielectric materials. These properties are very dependent on epoxy resin, curing agent, accelerator, filler and curing degree(%) of dielectric materials. In this work, the epoxy composites filled with silica fillers and cured with various accelerators having various curing degree(%) were prepared. The characterization of the thermal and mechanical properties wasperformed by thermal mechanical analysis (TMA), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), rheometer, an universal test machine (UTM).

• 드라이브 ㆍ 컨트롤
• /
• 제18권4호
• /
• pp.19-27
• /
• 2021

A bunker bed is a type of furniture that efficiently utilizes a narrow indoor space by having a high bed and using the empty space below as a living and storage space. The demand for multi-purpose furniture is increasing due to the recent increase in single-person households and wide-spread shared accommodation. According to the consumer research, one of the major drawbacks of a bunker bed was to get on and off the bed through a ladder or stairs. In order to overcome these problems, it was confirmed that the height adjustment function that can easily adjust the minimum and maximum heights of the bed was necessary. In this study, a height adjustable bunker bed was designed by using a gas spring that generates a repulsive force by the compressed gas inside. The design process consisted of the following three steps: Firstly, the hysteresis characteristics due to a friction and spring constant of a commercial gas spring were confirmed by measuring the repulsive force vs. compressed displacement. Secondly, requirements of the vertical lifting force exerted on the bed against gravity force were derived. Finally, the height-adjustable bed using the four-bar link mechanism was designed with 4 parameters so that the bed weight of 60-70 kgf could be adjusted to 800 mm in height by an affordable initial operation force. The performance was verified through prototype production and the results of vertical displacement and force to move were nearly the same as designed. In addition, an electrically operated height-adjustable bed was also designed with linear actuators and the performance was proved with the prototype.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.183-192
• /
• 1999

The derivative equation measured of a MV=Kp8{(EVn-EVn-1)+Ki/S/1* EVn+(Kd/s)*(2PVn-1-{PVn-PVn-1)}(원문이미지참조) is used on the machine apparatus of industrial field, but this par doesn\`t able to educate now, because we didn\`t have the implementation device of PID module, so the principle implementation system of the PID Module is manufactured and developed. Through this system, the implementation system of PID Module is practiced with that the SV and the set of P, I, D is set on the derivative equation measured of PID. A things to be known of this experiment result is flow. 1)PID module is known that had to be used with the module of A/D and D/A. 2) In process of PV is approached to the SV to follow Kp, Ti and Td to cause a constant of set value on the MVp=Kp*EV, Mv=Ki/1 EVdt, MVd+tDBT/D EV(원문이미지참조) the variable rate of E and Kp, Td, Ti in that table 1 is analysed, is same as flow. ①If Kp is high, PV is near fast to the SV, but Kp is small, PV is near slowly to the SV. ②If Ki is shot, PV is close fast to the SV, but Ti is high, PV is close slowly to the SV ③If Td is high, the variable rate of E press hardly when because it doesn\`t increase, but Td is small, the variable rate of E press not hardly, upper with 1),2), PID module is supposed that be able to do the A/S and an implementation of that apparatus, and getting a success of aim that an engineer want, on control of temperature, tension, velocity, amount of flow, power of wind end so on, to get the principle of automatic implementation in industrial field with cooperation of A/D and D/A module.

• 한국동물위생학회지
• /
• 제43권3호
• /
• pp.139-145
• /
• 2020

This study was carried out to identify the occurrence of transovarian transmitted diseases and antibody positive rates among Korean native breeder chickens. The infection rates with Salmonella pullorum and Salmonella gallinarum among 16-week-old, 36-week-old, and 56-week-old breeder chickens and the antibody positive rates to Egg Drop Syndrome '76, Mycoplasma gallisepticum and Mycoplasma synoviae among 16-week-old, 18-week-old, and 56-week-old breeder chickens were identified, and the antibody positive rates to seven major transovarian transmitted diseases among 1-day-old chicks were investigated. As a result, no infection with Salmonella pullorum and Salmonella gallinarum was found among the investigated subjects of all ages. Vaccinated breeder chickens showed the 100% antibody positive rate to Egg Drop Syndrome '76, and unvaccinated breeder chickens showed the 100% antibody negative rate to Mycoplasma gallisepticum and Mycoplasma synoviae, confirming that there was no infection with Mycoplasma gallisepticum and Mycoplasma synoviae. As a result of the antibody tests of the 1-day-old chicks for transovarian transmitted diseases, it was found that vaccinated chicks showed good antibody positive rates to avian encephalomyelitis, chicken infectious anemia, and avian reovirus, confirming that they had power of defense against the relevant infectious diseases, and that unvaccinated chicks showed the 100% antibody negative rates to avian leukosis, chicken reticuloendotheliosis, and Mycoplasma synoviae, confirming that there was no infection with the relevant diseases. Given that the results of this study showed that among the transovarian transmitted diseases of chickens, there was no history of infection with diseases against which vaccination was not administered and high antibody positive rates were found with diseases against which vaccination was administered, it is judged that chickens with good power of defense against diseases were bred, and it is deemed that constant monitoring and vaccination against transovarian transmitted diseases will be necessary for the control and prevention of the diseases.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).

• 한국습지학회지
• /
• 제19권1호
• /
• pp.90-102
• /
• 2017

본 연구에서는 과거 2년에 걸쳐 강우유출수 처리목적의 인공습지로부터 수집된 수질자료를 바탕으로 지금까지 국외에서 개발된 다양한 형태의 영양소 모델의 적용성을 평가하였다. 검토결과 질소제거에 가장 큰 영향을 미치는 요인은 수온과 수리학적 부하율(HLR) 이었는데 습지의 수표면적이 습지의 용량에 비해 더 중요하게 작용했음을 시사해주고 있다. 질소제거는 미국 WEF(water environment federation)가 개발한 준경험적인 형태의 모델이 적합한 것으로 밝혀졌다. 한편 인 제거 모델은 수온과 제거속도상수의 관계를 Power Model로 보고 모의했을 때 실측치와 가장 가깝게 계산치를 산출할 수 있었으며 실측치의 증가와 감소경향을 비교적 정확하게 모의할 수 있었다($R^2=0.79$). 그러나 모든 시도에서 수온이 특정온도 이하로 감소했을 때 가장 심한 오차를 발생하여 취약한 예측성능을 보였다. 한편 인공습지에서 질소제거특성을 검토한 결과 질산화에 비하여 탈질이 저조한 것으로 나타났는데 그 이유는 탄소원의 부족과 높은 용존산소 농도로 인하여 Anoxic 조건의 미형성 때문으로 분석되었다. 질소제거 향상방안으로 용존산소의 제어와 탄소원의 확보차원에서 햇빛에 노출된 개방수역과 햇빛에 노출된 식생구역, 그리고 습지의 기능적 측면을 고려한 구성요소의 배분 및 부유 수생식물 및 무기성 여재를 이용하는 방안을 논의하였다.

• 해양환경안전학회지
• /
• 제26권5호
• /
• pp.569-575
• /
• 2020

본 연구에서는 선박 전원용 연료전지 시스템 모델을 개발하여 순수한 산소를 공급하여 진행한 실험 결과의 비교를 통하여 연료전지 시스템 모델을 검증하였다. 검증된 모델을 활용하여 공기 압축기를 사용하여 공기를 공급할 경우에 대하여 산소를 공급한 경우와의 연료전지 출력 특성을 비교 검토하였다. 또한, 연료전지 시스템의 열물성치 변화가 스택의 출력에 어떠한 영향을 미치는지에 관하여 검토하였다. 그 결과 본 연구의 실험 범위에서 캐소드 공급 가스로 순수한 산소를 공급한 경우의 모델링을 통한 계산 결과와 실험 결과는 전 부하 영역에서 거의 동일한 전압 및 출력을 얻을 수 있었다. 560 A의 일정한 부하에서 캐소드 공급용 산소를 대신하여 공기를 공급한 경우 각각의 스택 전압은 약 14 V, 스택 출력은 약 8 kW, 스택 효율은 약 3 % 및 전체 시스템 효율은 8 % 정도 낮아짐을 알 수 있었다. 본 연구에서 검토한 열물성치 중에서 스택에 대한 냉각수의 열전달 계수가 스택의 출력에 가장 큰 영향을 미침을 알 수 있었다.

• 한국가스학회지
• /
• 제23권6호
• /
• pp.1-7
• /
• 2019

대부분의 정유 및 화학 시설에는 정전 등 갑작스러운 공정 정지 등의 문제로 인한 다량의 가스를 방출해야 하는 비상상황 발생에 대비하여 공정시설의 압력 상승을 완화하기 위해 설계된 플레어 시스템을 가지고 있다. 하지만 플레어 시스템의 불꽃 상승은 가시적 공해로 인한 공장 주변 주민들의 민원을 유발하며, 회사에서는 경제적 손실이 발생하므로 이에 대한 상시 관리가 필요한 상황이다. 본 연구에서는 플레어 시스템의 최적 운영방안을 도출하기 위하여 두 가지 항목에 대해 진단 및 분석을 진행하였다. 첫째, 불꽃 높이 상승 원인을 확인하기 위해 음향누출 측정기를 이용하여 안전밸브 및 압력 조정 밸브에서의 가스 누설을 탐지하였다. 둘째, 불꽃 불안전성 원인 파악을 위해 밀봉 드럼에 대해 CFD 모사 및 모형 제작실험을 통한 맥동 현상 발생을 진단하였으며 밀봉 드럼은 정상이며, 안전밸브의 4.3% 및 압력 조정 밸브의 10%에서 누설을 확인함으로써 비정상적인 불꽃 발생의 원인을 도출하였다. 본 연구결과에서 제시되는 사항은 플레어 시스템을 보유한 모든 회사에 적용이 가능하므로 이를 통한 민원 발생 및 제품손실의 방지가 기대된다.

• 생물환경조절학회지
• /
• 제26권4호
• /
• pp.353-360
• /
• 2017

본 연구에서는 장미 재배온실을 대상으로 온실 내부의 태양잉여열과 외부의 공기열을 선택적 열원으로 이용하여 온실난방용 온수를 생산할 수 있는 공기 대 물 히트펌프의 설계와 성능시험을 수행하였다. 태양잉여열 이용 축열운전과 외기열 이용 축열운전은 작물의 생육적온을 고려한 온실내부의 설정온도에 따라 자동전환 되도록 설계하였다. 제어반에 12개의 기준온도를 설정함으로써 축열운전 전환, 난방, 환기를 자동제어하며, 태양잉여열-외기열 선택적 축열운전에서 축열조의 온도는 축열능력과 난방부하에 대응하여 $35{\sim}52^{\circ}C$로 3단계 변온제어 하였다. 태양잉여열-외기열 선택적 축열에서 태양잉여열 이용 축열은 전체 시간의 23.1%, 외기열 이용 축열은 30.7%, 히트펌프 휴지시간은 46.2%를 차지하였으며, 난방성능계수는 태양잉여열 이용 축열 시 3.83, 외기열 이용 축열시 2.77, 전체 3.24로 평가되었다. 비교시험을 위해 축열조 온도를 $50{\sim}52^{\circ}C$로 항온제어 하는 조건에서 외기열 단독 이용 축열 시험을 수행하였으며 이때의 난방성능계수는 2.33으로 분석되었다. 결과적으로 공기 대 물 히트 펌프의 열원으로 온실내부 태양잉여열과 외부 공기열을 병용하고, 축열조 온도를 변온제어 한 결과 일반적인 외기열 이용 축열운전과 축열조 항온제어에 비해 난방성능 계수가 39% 향상됨을 확인하였다.