• Journal of the Korean Ceramic Society
• /
• 제40권12호
• /
• pp.1202-1207
• /
• 2003

Using a recently developed Hybric Plasma-Particle Accelerating Impact Deposition (HP-PAID) process, synthesis of nanostructured silicon coatings has been investigated by injecting vapor-phase TEOS (tetraethosysilane, (C$_2$H$\_$5/O)$_4$Si) into an Ar hybrid plasma. The plasma jet with reactants was expanded through nozzle into a deposition chamber, with the pressure dropping from 700 to 10 torr. Ultrafine particles accelerated in the free jet downstream of the nozzle, deposited by an inertial impaction onto a temperature controlled substrate. By using this process, nanostructured amorphous silicon coatings with grain size smaller than 10 nm could be synthesized. These samples were annealed in an Ar and crystallized at 900$^{\circ}C$ for 30 min. TEM analysis showed that the annealed coatings were also composed of nanoparticles smaller than 10 nm, which showed a good consistency that the average grain size of 7 nm was also estimated from a peak shift of 2.39 cm$\^$-1/ and Full Width at Half Maximum (FWHM) 5.92 cm$\^$-1/ of Raman analysis. The noteworthy is that a strong PL peak at 398 nm was also obtained for this sample, which indicates that the deposited coatings also contained 3∼4 nm nanostructured grains.

• Steel and Composite Structures
• /
• 제22권5호
• /
• pp.1001-1018
• /
• 2016

The purpose of this paper is to compare the structural responses obtained from the stochastic analysis of a suspension bridge subjected to uniform and partially correlated seismic ground motions, using different spatial correlation functions commonly used in the earthquake engineering. The spatial correlation function employed in this study consists of a term that characterizes the loss of coherency. To account for the spatial variability of ground motions, the widely used four loss of coherency models in the literature has been taken into account in this study. Because each of these models has its own characteristics, it is intended to determine the sensitivity of a suspension bridge due to these losses of coherency models which represent the spatial variability of ground motions. Bosporus Suspension Bridge connects Europe to Asia in Istanbul is selected as a numerical example. The bridge has steel towers that are flexible, inclined hangers and a steel box-deck of 1074 m main span, with side spans of 231 and 255 m on the European and Asian sides, respectively. For the ground motion the filtered white noise model is considered and applied in the vertical direction, the intensity parameter of this model is obtained by using the S16E component of Pacoima Dam record of 1971 San Fernando earthquake. An analytically simple model called as filtered white noise ground motion model is chosen to represent the earthquake ground motion. When compared with the uniform ground motion case, the results obtained from the spatial variability models with partial correlation outline the necessity to include the spatial variability of ground motions in the stochastic dynamic analysis of suspension bridges. It is observed that while the largest response values are obtained for the model proposed by Harichandran and Vanmarcke, the model proposed by Uscinski produces the smallest responses among the considered partially correlated ground motion models. The response values obtained from the uniform ground motion case are usually smaller than those of the responses obtained from the partially correlated ground motion cases. While the response values at the flexible parts of the bridge are totally dominated by the dynamic component, the pseudo-static component also has significant contributions for the response values at the rigid parts of the bridge. The results also show the consistency of the spatial variability models, which have different characteristics, considered in this study.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권5호
• /
• pp.2731-2737
• /
• 2013

Background: This study evaluated the validity and reliability of applying the Katz's Activities of Daily Living (ADL) scale in an Iranian sample of elderly oncologic patients following initial cancer treatment. Materials and Methods: The scale was translated with the forward-backward procedure to give an Iranian version. The ADL scale was then applied in a random sample of 400 oncologic patients aged 60 and older following initial cancer treatment. Assessment of the scale stability was twice, with a 14-days (two weeks) interval, to 30 (of the 400) eligible elderly cancer patients in March 2012. To measure treatment effects, the index was run with 150 patients in a three month recall, following oncology processing. Exploratory and confirmatory factor analysis was performed for assessment of construct validity of the Katz's ADL. Reliability was measured with internal consistency (Cronbach's alpha co-efficient), and test/retest (Spearman's r value) of the instrument. Criterion validity was evaluated by comparing the Katz with Physical Function (PF) subscale of SF 36. Known-group validity was approved by comparing of Katz' ADL between quartile groups of PF subscale of SF 36. Results: In our study the ADL demonstrated a high degree of internal homogeneity (Cronbach's alpha 0.923). There was a high correlation between scores of two time measurement of Katz's ADL (p value of two- related- samples test was 0.3). Construct validity showed a correlation coefficient of 0.572 between the ADL and PF scores. In factor analysis, 2 factors were extracted. Evidence for the reliability of the questionnaire was good and known group validity was approved by significant differences of ADL score between quartiles of the PF subscale of SF36. Conclusions: The results suggest that the Iranian version of ADL applied for oncologic older adult patients following initial cancer treatment is a reliable and a valid clinical instrument and comparable to those reported in other studies.

• Journal of Distribution Science
• /
• 제13권4호
• /
• pp.55-64
• /
• 2015

Purpose - Multi-dimensional prices comprise multiple components such as monthly payments and a number of payments rather than a single lump-sum amount. According to previous studies, an increase in the number of price dimensions leads to a massive amount of cognitive stress resulting in incorrect calculation, and deterioration in the consistency of the price judgment. However, an increase only in the level of complexity of calculating multi-dimensional prices does not always result in a corresponding decrease in the accuracy of price evaluation. Since diverse variables could affect consumers' purchase-decision-making process, the results of price evaluation would be different. In this study, an empirical analysis was performed to determine how the accuracy of price evaluation varies depending on the extent of the complexity of price dimensions using product involvement and brand preference as moderating variables. Research design, data, and methodology - A survey was conducted on 260 students, and 252 effective responses were used for analysis. The data was analyzed using t-test, one-way ANOVA, and two-way ANOVA. In this study, six hypotheses were developed to examine the effect of product involvement and brand preference on consumers' evaluation effort of multi-dimensional prices. Results - As the number of price dimensions increased, accuracy of price evaluation appeared to be low in high involvement, as expected. However, it showed no differences in price evaluation effort when the level of complexity of calculating multi-dimensional prices is low. When a small number of price dimensions are presented in both cases of high and low involvement, accuracy of price evaluation is much higher in a weak brand preference. On the contrary, a strong brand preference enhances an accuracy of price evaluation only in case of low involvement when the number of price dimensions is increased. An interaction effect of product involvement and brand preference on consumers' evaluation of multi-dimensional prices did not exist irrespective of the level of complexity of calculating prices being high or low. Conclusions - When the number of price dimensions is small, consumers' effort for price evaluation shows almost no difference without the moderating effect of involvement, and a weak brand preference leads to a higher accuracy of price evaluation in an effort to make the best selection. No interaction effect of product involvement and brand preference was found except for a main effect of brand preference. When a price is composed of multiple dimensions rendering it more difficult to calculate the final price, the effort for price evaluation was expected to decrease only slightly in case of combination of high involvement and strong brand preference. This is because people have a higher purchase intentions and trust for that particular brand. However, the accuracy of price evaluation was much lower in cases of high involvement, and there was no interaction effect between product involvement and brand preference except for a main effect of involvement and brand preference, respectively.

• Journal of the Korean Society of Food Science and Nutrition
• /
• 제44권12호
• /
• pp.1819-1825
• /
• 2015

This study was carried out to investigate the effect of hydrocolloids [hydroxypropylmethyl cellulose (HPMC), xanthan gum (XG), guar gum (GG), and glucomannan (GM)] on the physicochemical properties of bread flour dough containing rice flour. In amylograph analysis, the significantly lowest gelatinization temperature was obtained in dough with XG (P<0.05). XG revealed the highest maximum viscosity while GM revealed the lowest. In viscograph test, the lowest gelatinization temperature and maximum viscosity showed the same result as in the amylograph. Breakdown value was also highest in dough containing XG, but lowest in the control and dough containing HPMC. Setback value was highest in dough containing HPMC, but lowest in dough containing XG. In farinograph analysis, consistency was greatest in dough with HPMC and XG. Hydrocolloids affected water absorption, which was highest in dough containing GM. Development times of dough containing HPMC and XG were low. Stability was lowest in dough with XG. Degree of softening was reduced in dough containing HPMC and GG compared to the control but increased in dough containing XG and GM. Dough containing HPMC and GG showed the largest volume at 3 h of fermentation. Dough with HPMC showed the lowest pH value. Hydrocolloids in this study affected physicochemical properties of dough.

• Journal of Food Hygiene and Safety
• /
• 제12권1호
• /
• pp.26-38
• /
• 1997

The quality changes of hams and sausages in refrigerated storage were investigated. Seven types of hams and six types of sausages produced in Korea were collected from markets and stored at 1$0^{\circ}C$ according to the Food Code of Korea, and then chemical, microbiological, textural and sensory characteristics were evaluated at 30, 40 and 50 days. The proximal analysis showed considerable variation in fat with less variation in moisture and protein. The pH values of hams and sausages slightly changed with no consistent difference. Water activity values of all samples except one type of sausage were consistent over time in refrigerated storage. No purge losses of hams were observed except two types of samples in the intial stage. Several types of sausages showed purge losses with no consistency and one type of sausage showed consistent purge losses (0.44~11.29%) during the storage. The volatile basic nitrogen (VBN) content of hams and sausages was still within 20 mg% (Standard and Specification of Korea) on the 50th day, although the VBN of all samples significantly increased over time (p<0.05). The thiobarbituric acid (TBA) values of hams and sausages were well below 1.0 during the storage, although the TBA values of all samples significantly increased (p<0.05). However it was noticed that one type of ham and two types of sausages showed TBA values of 0.945, 0.928 and 0.978, respectively. All the standard plate counts (SPCs) of hams during the storage period showed a level below 30 CFU/g except one type of sample with 103 CFU/g at 50 days. All the SPCs of sausages showed a level below 50 CFU/g except one type of sample with 102 CFU/g and two types of samples with 104 CFU/g on the 50th day. Coliform groups were not counted in all samples during the storage. Instrumental texture analysis showed that springiness, cohesiveness, chewiness, gumminess and adhesiveness slightly changed with no consistent difference. The hardness of the hams showed a decreasing tendency, and the hardness of the sausages an increasing tendency with no significant difference. Sensory evaluation for color, flavor, taste, texture and overall acceptability showed decreasing tendencies over time (p<0.05). The scores of the five sensory characteristics maintained the medium level of quality at the termination of the experiment. Although the results indicated that the ham and sausage samples were acceptable after the 50 days' storage at 1$0^{\circ}C$, the shelf-life of the samples should be determined considering the rapid growth of bacteria and the high TBA values at 50 days.

• Journal of Science Education
• /
• 제41권1호
• /
• pp.80-97
• /
• 2017

The purpose of this study was to develop understanding-oriented materials based on backward course design model and analyze their effects on 'biology and environment' unit of elementary school science. Backward Design starts from a specification of learning outcomes and decisions on methodology and syllabus are developed from the learning outcomes. This method has a strength maintaining consistency between educational contents-evaluation-learning activities and also promoting student's authentic understanding. The 78 students 6th graders participated in this experiments. Data was collected using project activities, the science academic emotion scale and academic achievement. The collected data was analyzed by t-test and ANCOVA analysis using the SPSS 23 statistical program. The following major conclusions were drawn on the basis of data analysis. First, the experimental group showed a relatively accurate understanding of the contents of science but they could not produce creative output in two project activities. Second, the interaction effect of the instruction based on backward curriculum design and science academic emotion was not significant statistically. Third, the experimental group showed a significant improvement in the academic achievement of 'biology and environment' unit.

• The Journal of the Korea Contents Association
• /
• 제11권5호
• /
• pp.224-232
• /
• 2011

The purpose of this study was to test the reliability and validity of the Korean version of the fear of daily activities questionnaire (FDAQ) for low back pain patients. Seventy-three subjects with low back pain were participated in this study. The subjects completed ten standardized self-administered questionnaires that measure fear of specific daily activities. The reliability of the acquired data was determined by the intra-class correlation coefficient (ICC) and the Cronbach's ${\alpha}$ for internal consistency. Constructive validity was analyzed by factor analysis, and concurrent validity was acquired from comparison FDAQ scores to the visual analogue scale (VAS) and Oswestry disability index (ODI) scores. The test-retest reliability of the Korean version of the FDAQ showed good ICC (2,1)= 0.96 (95%CI 0.94.0.98) and Cronbach's alpha value was 0.93. Factor analysis suggested two factors solution consisting of spinal loading and spinal movement/posture, it explained 76.1% of the total variance. The concurrent validity was moderately related with pain and disability. Therefore, the Korean version of the FDAQ is a useful method for measuring the fear of daily activities of patients with low back pain.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• 제11권4호
• /
• pp.339-348
• /
• 2017

The purpose of this study was to verify the validity and reliability of the computerized general neurocognitive test using intuitive evaluation techniques to reflect the needs of the elderly and to validate neurocognitive function appropriately. The subjects were 100 elderly people who were over 60 healthy people. To evaluate the comprehensive neurocognitive function of the elderly, Computerized Neuro-cognitive Function Test (CNT, cybermedic. Co., Korea) developed by CyberMedic was used. The test consist of attention test, memory test and the problem solving ability test. As a result of correlation analysis of CNT test items, it was possible to confirm the characteristics of measuring single domain of attention and memory test. The problem-solving ability test also showed a high level of significant correlation, although the purpose of measurement was different, but a comprehensive cognitive function test for problem solving was possible. In the reliability analysis, the half reliability and internal consistency of test - retest were significantly higher. As a result of the above study, we conclude that the comprehensive neurocognitive test items constituted in this study have achieved reproducibility and effectiveness.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제40권4호
• /
• pp.191-202
• /
• 2017

The purpose of this study is to develop an engineer competency model using Analytical Hierarchy Process (AHP) to improve the national technical qualification system. Korea has managed technical human resources at the government level through the operation of a national technical qualification system that certifies engineers with national certificates or technical grades by laws. However, there have been increasing concerns that the government system is separated from global standards and does not reflect an engineer's comprehensive capabilities. For these reasons, the new architecture of the system has been continuously discussed and becomes a major policy issue of the Korean government. For the development of the engineer competency model, domestic and global models were separately structured using 554 valid questionnaires with a consistency ratio (CR) of 0.1 or less. The relative importance of engineer competency factors in a domestic model was career (0.383), qualification (0.253), academic degree (0.195), and job training (0.169) whereas the order in the global model was career (0.308), global ability (0.237), job training (0.175), domestic qualification (0.147), and academic degree (0.134). The results of AHP analysis indicated that the evaluation factors and methods recognized by engineers were different from a current government model focusing on domestic qualifications. There was also perceptual difference in the importance of engineer evaluation factors between groups depending on the type of organizations and markets. This means that it is necessary to reflect the characteristics of organizations and markets when evaluating engineer competency. Based on AHP analysis and literature reviews, this paper discussed how to develop a new engineer competency index (ECI) and presented two effective index models verified by simulation test using 59,721 engineers' information. Lastly, the paper discussed major findings of our empirical research and proposed policy alternatives for the improvement of a national engineer qualification system. The paper contributes to the management of technical human resources since it provides quantitative competency models that are objectively developed by reflecting market recognition and can be effectively used by the policy makers or firms.