• Reproductive and Developmental Biology
• /
• v.38 no.3
• /
• pp.129-136
• /
• 2014

This study was carried out to elucidate the effect of antibiotic-free rearing system(ARS) on cortisol level, stress hormone, and fatty acid content in the edible muscle tissues, that were of M. longissimus in Hanwoo. These cattle were reared in two different systems including antibiotic-free (ARS) and conservative system (CRS). To increase the experimental reliability, the muscle samples were purchased 3 times from 3 Korean brands of beef produced with ARS or CRS. In the muscle tissue, cortisol level was significantly lower in ARS than CRS, (p=0.0176). But the levels of total saturated- and unsaturated-fatty acids were not significantly different between ARS and CRS (p>0.05). Of total fatty acids, the total saturated fatty acid tended to be greater in CRS and the total unsaturated fatty acid tended to be greater in ARS. However, of the total unsaturated fatty acids, the level of n-6 unsaturated fatty acids was significantly higher in ARS than CRS (p=0.0040). Especially, ${\alpha}$-linolenic acid (ALA) and ${\gamma}$-linolenic acid (GLA) levels were significantly higher in ARS (p<0.01). The n-6 fatty acid content and cortisol level in muscle tissue were negatively correlated at p=0.0140. In conclusion, ARS may produce beef with higher quality which contains lower cortisol and greater n-6 fatty acids, such as ALA and GLA.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.39
• /
• pp.143-175
• /
• 2008

The documentary letter of credit is the most preferred and frequently used method in International Payment System in Korea, as it has less possibility of occurring credit risks in export than any other payment system. That's because the exporter can get payment from the issuing bank(confirming bank) by delivering the goods and presenting documents following the required procedure under the letter of credit, as the payment is affirmed by the issuing bank(including the confirming bank in case of the confirmed letter of credit) regardless of the buyer's payment. However, the pattern of payment methods used in international trade of Korea is changing dramatically like the importance of the credit is decreasing continuously among the payment methods while the remittance is increasing. The increase of remittance has a positive aspect that International Payment System are changing into those of advanced countries, but the decrease of the credit also has a negative aspect that the exporter might have a greater credit risks. Therefore, we need a systematic device to deal with this. Exporters in Korea usually have used the export credit insurance to deal with the credit risks However, the export credit insurance also have a limitation as the policy finance due to the limitation based on the credit status of the business and the limitation of acceptance from the lack of financial resources of the government, etc. Korea, which is the 11th export power in the world, has a basic limitation to deal with the credit risks by depending on the export credit insurance only. So, in this thesis, I have studied on the international factoring, forfaiting, which are advanced export finances and widely used in advanced countries, as substitutes to deal with the credit risks. the international factoring is an trade financing in which a factor offers full services such as credit cover, offering prepayment, collection, account receivables, management, etc, instead of the exporter on the account receivables occurred by the exporter's delivering goods to the importer. This international factoring has a high possibility of using as a means to deal with the credit risks, because it offers prepayment without recourse. the forfaiting is another export financing in which a forfaiter purchases the draft, the promissory note and other negotiable instruments issued from the international trade, with fixed interest rate without recourse from the exporter or previous holder. By using this method, they can avoid foreign exchange risks, contingency risks as well as credit risks, as the conveyances like the promissory note, etc are issued with the note warranty so-called 'per aval' in business practice. These trade financing are good substitutes to deal with the credit risks in export, but they are not widely used in Korea. Though it can be explained with various reasons, the common reasons are the lack of understanding on the use of advanced export finance, the lack of experts to manage the advanced trade finance, the conservative way of thinking of domestic organizations related to trade financing, the lack of organizations supporting the trade financing, etc.

• Journal of the Korean Professional Engineers Association
• /
• v.16 no.1
• /
• pp.20-34
• /
• 1983

A phenomenon in the unplanned urban sprawl of Cheong-ju city has to be rest-rained from disposing and to develop, though progress in urbanization inevitably decreases rural area. So, this thesis aims at reviewing, revising and guiding toward the more effective land use planning practice and zoning mechanism and system of Cheong-ju city. I proposed that land use planning should be had several factors and thereupon that Korean zoning mechanism and system including Building Code should be amended because of inducing human activities in buildings and facilities not to demarcate and plan every one of them. First, the factors of urban planning are a rather diversified approach to it than a unified, supplementation of the applicable difference in time between preparing and appling it, a solid controlling system, a micro and macro planning theory and giving serious consideration for the inertia from the existing land use. Second, the applicable amendments for our zoning mechanism including Eluding Code are as follows; a need of reorganization for Zoning Ordinance appricated to different regulation concerning a scale and peculiarity of a oily, a decision of the different earmarked confinement in area to different zone ana from Zoning Ordinance in City Planning Law, a demarcated facilities and the more detailed land use concerning human activies than the exsisting and entrusting decision on the ways and processes of it to every rural city planning committee, a settlement of zone ana area considering for block-unit and Planned Unit Development(P. U. D.), and a need of security jurisprudence in order to solve the zoning regulation rather in City Planning Law than in Building Code that our zoning regulation and controlling system are depended on. According to these applicable amendments to Cheong-ju city, I proposed the conceptions of Cheong-ju city land use planning are as follows; a reinforcement with one cored pattern of urban land use, a selection of gradual urban sprawl by way of city development and renewal, a strengthening accessibility to the core of the city with Plurizing the system of arterial roads, a choice of priority to conservation at the core of tile city and security of open spaces and parking area at the area of the city, a harmonization between development and conservation at the inner ring area that is situated between the core and periphery reserved area in order to develop in the future, a buffered open space situated at the congested area with heterogenous functions, and a completion of urban open space system. The proposal made here so far is for the hope of the better structure of Cheong-ju city that should be granted to the peculiarity developed with educational, cultural, conservative and self-sufficient city functions.

• The Korean Society of Law and Medicine
• /
• v.12 no.2
• /
• pp.265-291
• /
• 2011

Changes in a drug's availability from prescription only to over-the-counter (OTC) status is of concern to physicians from both public health and individual patient perspectives. Government has generally been supportive of changes in medications from prescription(Rx) to over-the-counter (OTC) status in Korea, however, recognizing that there are both benefits and risks to any health care intervention, health care professionals are conservative in implementing changes to either the process or structure of health care. Changes in status of a drug from Rx to OTC can represent a change in both structure and process. Cost and convenience seem to be major factors in determining whether, given the choice, patients purchase a medicine over the counter or obtain it on prescription. With current arrangements, exemption from prescription charges provides an incentive to continue to obtain products on NHS prescription even when they are available over the counter. There is therefore no simple relation between the availability of over the counter medicines and the level of prescribing of deregulated products. The appropriate use of over the counter medicines-particularly those that have only recently been deregulated-places a burden of care on community pharmacists and calls for closer working relationships with general practitioners. In particular, systems for referral and for recording details of both prescribed and over the counter medicines need to be developed, and a direct route needs to be established for community pharmacists to report adverse drug reactions to over the counter products. Reclassification of prescription medicines-by making them available through pharmacies without a prescription-provides the opportunity for consumers to purchase a wider range of medicinal products without making a demand on NHS resources. There is, however, no simple relation between availability of over the counter medicines and demand for NHS prescriptions. In the late 1980s the UK government fuelled the over the counter market by making it easier to reclassify certain medicines from prescription only status to allow over the counter sale in pharmacies. To explore the influence of deregulation of medicines on NHS prescribing, this article presents analyses of consumer behaviour in using medicines and prescribers' attitudes to over the counter medication and collates findings from research. Policy makers should be aware that patients' expectations in relation to OTC medicines may be in conflict with evidence-based practice.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.194-195
• /
• 1982

Recommendaton: These are the highlights of the findings of the Timber Consumption Survey carried out by the Project in 1966, and covering consumption for the period from 1961 to 1965. The survey was oriented towards consumption for structural, commercial and industrial purposes and existing estimates for local (village-level) consumption as fuel and the like were adopted. A full report on the survey was submitted to the Bureau of Forestry in 1966. Long-term Trends: After allowance for anticipated population increase, this ten year's increase in industrial wood consumption represents a gain of about 30% in per capita consumption (from 0.0913 cu.m. per capita to 0.118 cu.m. per capita). This is only about half the expected general economic growth of about 75% (7% per annum). It is therefore likely (a) that the 1975 estimate is conservative, (b) that the consumption demand beyond 1975 may be expected to build up at a greatly increased rate. Estimated income elasticity coefficients are high, and with expected ir,creases in prosperity and population, the consumption is expected to rise to 10 million cu. meters by the year 2,000. Consumption Pattern: The breakdown of industrial consumption (1965) is given in Table 4-2, showing sawnwood consumption as the most important in 1965. The upward trend in all sectors over the 1961-65 period is expected to continue. The general consumption pattern is expected to change through 1975 with a sharp increase in the relative importance of pulp products (to 30% of total consumption) offset by declining relative importance of sawlogs. The following recommendations follow from the study: (i) Industrial forests. - A programme of establishment of consolidated industrial forests should be initiated as a matter of urgency. (ii) Fuelwood forests - Properly sited, protected and managed fuelwood forest, worked on a 20-year rotation, should be established as a nation wide basis. (iii) Hardwood utilization - Detailed investigations are required into the use of indigenous hardwoods for the pulp, particle board and hardboard industries. (iv) Mining timber - Preservation treatment of all mining timber should be enforced by law. (v) Sawmills - Licencing restrictions should be enforced to reduce the number of small, inefficient sawmills. b. Extension work should be undertaken bv government to improve sawmilling practices.

• Journal of Environmental Health Sciences
• /
• v.42 no.3
• /
• pp.160-168
• /
• 2016

Objectives: Materials coming into contact with food may result in the migration of chemical substances into the food. To protect consumers from exposure, Regulation (EU) No. 10/2011 specifies the use of standard migration tests. Polyethylene terephthalate (PET), widely used for food packaging materials, has drawn the attention of researchers because unwanted migration of PET into food might occur when consumers reuse packaging material. The aim of this study was to predict and develop a migration model for two components, acetaldehyde and butyraldehyde in PET, into food simulants under conditions of changing pH and solvents, such as those observed in fermented foods like kimchi or sauerkraut. Methods: Using a migration model based on Fick's second law of diffusion in one dimension, the migration of acetaldehyde and butyraldehyde from PET into a simulant of fermented food at $20^{\circ}C$ over 10 days was evaluated. The simulant for fermented food was modelled as 10% ethanol for three days, followed by 3% acetic acid for seven days. Results: The migration of acetaldehyde into the 10% ethanol was 0.36 times that of a simulated fermented food system, while that of butyraldehyde was 1.34 times greater. These results may have been influenced by the chemical interactions among the migrants, polymers and simulants, as well as by the solubilities of the migrants in polymers and simulants. Conclusion: Because food simulants have a limited capacity to mimic real food systems under the current migration model, an appropriate simulant and migration test should be considered in the case of increasing acidity. Furthermore, since the accuracy of the worst-case estimation of migration predicted by the current model is severely limited under changing food conditions, food simulants and their interactions should be further investigated with respect to conservative migration modelling.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.173-181
• /
• 1999

To deepen the understanding of shear behaviour in beams without transverse reinforcement, the relative importance of five contributing factors to concrete shear resistance($v_c$), which are i)flexural compression zone, ii)friction at crack faces, iii)dowel action, iv)arch action and recently identified, v)residual tensile stresses across cracks, was explained physically using two analytical methods based on the truss concept. One is called "Modified Compression Field Theory(MCFT)" considering ii) and v) explicitly, and the other "Crack Friction Truss Model(CFTM)" more dominantly ii) in determining concrete resistance. To verify their effectiveness, the predictions using MCFT and CFTM were also made for twenty KAIST beam tests($f'_c$=53.7Mpa), designated more likely to the development of the size effect law based on the fracture mechanics concept. Experimental findings with varying of a/d, longitudinal reinforcement ratios, and obtained from MCFT enabled additional explanations for some phenomena which were difficult to measure in tests. However, MCFT seemed somewhat conservative for beams with higher longitudinal reinforcement, while somewhat unsafe for beams with larger depths. More tests are necessary leading to firm conclusions in these areas.

• Imaging Science in Dentistry
• /
• v.50 no.3
• /
• pp.209-216
• /
• 2020

Purpose: In India, the age of 14 years is the legal age threshold for child labour. Therefore, in suspected instances of child labour, age assessment plays a crucial role in determining whether a violation of the law on the employment of children has occurred. The aim of this retrospective cross-sectional study was to assess the discriminatory ability of stages of cervical vertebral maturation (CVM) in predicting the legal age threshold of 14 years. Materials and Methods: Routinely taken lateral cephalograms from 408 subjects aged 10 to 18 years were evaluated retrospectively using the CVM stages described by Baccetti et al. Descriptive statistics, accuracy, sensitivity, specificity, positive and negative predictive values, and likelihood ratios were calculated for stages 2, 3, and 4 of CVM. Results: Real age increased as the CVM stage gradually increased. The results of 2×2 contingency tables showed that CVM stage 4 produced an accuracy of 71% and 73%, a false positive rate of 7% and 18%, and a post-test probability of 59% and 68% for boys and girls, respectively. Conclusion: Based on these findings, it can be concluded that the stages of CVM are of limited use for predicting the attainment of the legal age threshold of 14 years. Future studies should investigate whether combinations of skeletal and dental methods could achieve better accuracy and post-test probability.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.376-385
• /
• 1987

In this study, the plane stress fracture toughness and Tearing modulus are investigated for various crack ratios using the J integral. To evaluate the J integral and Tearing modulus, both experiments and estimation are used. The thickness of the low carbon steel specimens that is used in the experiments is 3mm. The type of specimen that is considered in the study is center-cracked-tension one. The measurements of crack length are performed by unloading compliance method. In the estimation of crack parameters such as the J integral and load line displacement, the Ramberg and Osgood stress strain law is assumed. Then simple formulas are given for estimating the crack parameters from contained yielding to fully plastic solutions. Obtained results are as follows; (1) When the crack ratio is in the range of 0.500 - 0.701, the plane stress fracture toughness is almost constant regardless of crack ratios. (2) The fracture toughness (J$\_$c/) and Tearing modulus (T) obtained are J$\_$c/=28.51kgf/mm, T=677.7 for base metal, J$\_$c/=31.85kgf/mm, T=742.0 for annealed metal. (3) Simpson's and McCabe's formulas which consider crack growth in estimating J integral are shown more conservative J and lower T than Rice's and Sumpter's. (4) Comparison of the prediction with the actual experimental measurements by Simpson's formula shows good agreement.

• Earthquakes and Structures
• /
• v.20 no.1
• /
• pp.39-53
• /
• 2021

By means of installing sloped rolling-type seismic isolators (SRI), the horizontal acceleration transmitted to the to-be-protected object above can be effectively and significantly reduced under external disturbance. To prevent the maximum horizontal displacement response of SRI from reaching a threshold, designing large and conservative damping force for SRI might be required, which will also enlarge the transmitted acceleration response. In a word, when adopting seismic isolation, minimizing acceleration or displacement responses is always a trade-off. Therefore, this paper proposes that by exploiting the possible information provided by an earthquake early warning system, the damping force applied to SRI which can better control both acceleration and displacement responses might be determined in advance and accordingly adjusted in a semi-active control manner. By using a large number of ground motion records with peak ground acceleration not less than 80 gal, the numerical results present that the maximum horizontal displacement response of SRI is highly correlated with and proportional to some important parameters of input excitations, the velocity pulse energy rate and peak velocity in particular. A control law employing the basic form of hyperbolic tangent function and two objective functions are considered in this study for conceptually developing suitable control algorithms. Compared with the numerical results of simply designing a constant, large damping factor to prevent SRI from pounding, adopting the recommended control algorithms can have more than 60% reduction of acceleration responses in average under the excitations. More importantly, it is effective in reducing acceleration responses under approximately 98% of the excitations.