• Journal of Forest and Environmental Science
• /
• v.34 no.3
• /
• pp.262-274
• /
• 2018

Spider fauna of Demilitarized Zone (DMZ) and adjacent areas in Korea was surveyed in 2001-2003, 2013-2015, and 2017. Total of 34 surveyed areas across 10 provinces were divided into four main regions (east coast, mid-east mountain, midland, and west coast areas) in accordance with administrative districts and topography. Total of 273 species of 145 genera in 32 families were identified from 10,886 collected spiders. In conclusion, the spider fauna in the DMZ is 281 species of 147 genera in 32 families with 162 species of 99 genera in 23 families in the previous reports. This corresponds to about 37.6% of the Korean spiders as of 2015. The species richness among surveyed localities was ranged 45 species to 92 species. The species richness of each taxon is high in Araneidae, Salticidae, Linyphiidae and Theridiidae. Habitat generalists were 22 species and habitat specialists were 69 species. The 143 species were web builders and 130 species were wanderers by the outlined life style. In DMZ spiders, only 7 species, Thymoites ulleungensis, Arcuphantes pennatus, Lycosa coreana, Allagelena koreana, Cybaeus mosanensis and Cybaeus triangulus, Kishidaia coreana, were recognized as Korean endemic. Five species, Scytodes thoracica, T. ulleungensis, Lycosa labialis, Takeoa nishimurai, and Phrynarachne katoi, are rare species with a trend of decreasing density in recent years. Araneus rotundicornis has been discovered for the first time since its first report. This study may be useful in the conservative management and will contribute to knowledge of the distribution and biogeography of DMZ areas in the future.

• Restorative Dentistry and Endodontics
• /
• v.30 no.5
• /
• pp.402-408
• /
• 2005

The purpose of this study was to investigate the effects of estrogen deficiency on pulpodentinal complex of tooth in ovariectomized rats. Thirty female Sprague-Dawley rats, 10 weeks old, were used. Rats were grouped into two groups. One group (n = 15) was subjected to sham surgery (SHAM) and the other group (n = 15) was ovariectomized bilaterally (OVX). Animals were sacrificed 12 weeks later, and their mandibular molars and associated periodontal supporting tissues were dissected out, and fixed in $10\%$ buffered formalin. For comparison of groups, immunostained for osteonectin. Histomorphometrical measurement of change of teeth was performed using an image analysis system and paired t-test was used and the level of significance for overall differences was set at p < 0.05. In immunostaining of osteonectin, they were significantly different from each other. The predentin thickness in OVX rats was wider than in SHAM rats. And in SHAM rats, osteonectin was more specifically stained in predentin areas than in OVX rats. These results indicate that estrogen deficiency increased the unmineralized predentin areas and decreased osteonectin content in pulpal tissues in rats. If our result is applicable to human studies, odotoblast is affected by estrogen deficiency.

• Archives of Craniofacial Surgery
• /
• v.19 no.1
• /
• pp.1-2
• /
• 2018

Theoretically, panfacial bone fractures involve all three areas of the face: frontal bone, midface, and mandible. In practice, when two out of these three areas are involved, the term "panfacial bone fracture" has been applied. We can use physical examination, simple radiologic examination, and computed tomography study for diagnosis. Linear fracture are treated by conservative treatment. But, most of panfacial bone fracture patients need to be treated by open reduction and internal fixation. Facial width is most important thing that we need to care during operation. There are many ways about sequence like "top to bottom," "bottom to top," "outside to inside," or "inside to outside" and the authors prefer "top to bottom" and "outside to inside" ways. The authors apply arch bar from the first of surgery and then, set frontal bone fracture, midface fracture and mandible fracture in sequence. Usually, we remove the stitches for 5 days after surgery and the intraoral stitch removed after 2 weeks. Usually arch bar is going to be removed 4 weeks after surgery. We could get acceptable results with the above way.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.39 no.3
• /
• pp.134-138
• /
• 2013

Pain on the soft palate and pharynx can originate in several associated structures. Therefore, diagnosis of patients who complain of discomfort in these areas may be difficult and complicated. Pterygoid hamulus bursitis is a rare disease showing various symptoms in the palatal and pharyngeal regions. As such, it can be one of the reported causes of pain in these areas. Treatment of hamular bursitis is either conservative or surgical. If the etiologic factor of bursitis is osteophytic formation on the hamulus or hypertrophy of the bursa, resection of the hamulus is usually the preferred surgical treatment. We report on a case of bursitis that was managed successfully by surgical treatment and a review of the literature.

• Journal of the Korean Home Economics Association
• /
• v.41 no.3
• /
• pp.93-111
• /
• 2003

This study aimed to examine the water consumption of urban households according to pro-environmental attitude for environmental protection. In contrast to preview studies, this study purposed to include various related independent variables, motive to environmental behavior, in special, in the model, and suggest informative data for research, education and strategies related to environmental protection. The data were from 665 housewives living in five urban areas. For the analysis of data, frequencies, means, percentages, GLM analysis, DMR test and Chi-square test were used. The main results of this study were as follows; 1. The respondents held high pro-environmental attitude that pro-environmental behaviors are important to protect environment. The pro-environmental attitude among the respondents were statistically different from the independent variables : spouse's occupation, living area, help of housekeeper, knowledge about environmental protection, convenience to check water consumption, and perception of voluntary conservative behavior among neighborhood 2. There were great difference on water consumption among respondents. The significant independent variables to have effects on water consumption were different between water consumption per person and higher/lower average water consumption. The relationships of pro-environmental attitude and motive to pro-environmental behavior with two water consumption as dependent variables were unique. Also, living areas and knowledge about environment protection were consistently important to explain the difference of water consumption.

• Restorative Dentistry and Endodontics
• /
• v.33 no.6
• /
• pp.560-569
• /
• 2008

Microorganism survived in the root canal after root canal cleaning and shaping procedure is a main cause of root canal treatment failure. There are several mechanisms for the bacteria to survive in the root canal after chemomechanical preparation and root canal irrigation. Bacteria organized as biofilm has been suggested as an etiology of persistent periapical lesion. Recent studies were focus on removal of Enterococcus faecalis biofilm due to the report that the persistence of this bacteria after root canal treatment may be associated with its ability to form biofilm. Several investigations demonstrated that current root canal treatment protocol including use of NaOCl, EDTA and Chlorhexidine as irrigants is quite effective in eliminating E. faecalis biofilm. However, this microorganism still can survive in inaccessible areas of root canal system and evade host immune response, suppress immune activity and produce biofilm. Up to date, there is no possible clinical method to completely get rid of bacteria from the root canal. Once the root canal treatment failure occurred, and conventional treatment incorporating current therapeutic protocol has failed, periapical surgery or extraction should be considered rather than prolong the in effected retreatment procedure.

• Proceedings of the KACD Conference
• /
• 2001.05a
• /
• pp.235-237
• /
• 2001

;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.

• Restorative Dentistry and Endodontics
• /
• v.25 no.3
• /
• pp.381-389
• /
• 2000

Lateral condensation with gutta-percha and sealer has been shown to provide an excellent apical seal; however, the lateral condensation technique has demonstrated less favorable apical leakage results in curved canals when compared with straight canals. Placement of endodontic spreaders to within 1 to 2mm of the root canal working length has been advocated for optimum gutta-percha obturation. Due to their stiffness, stainless-steel(SS) spreaders will often fail to achieve this position in curved canals. Newly marketed nickel-titanium(NT) spreaders may offer an advantage in this regard due to the increased flexibility of these instruments. The purpose of this study was to evaluate the effect of NT finger spreader on the sealing ability in lateral condensation technique, compared with conventional SS finger spreader. Twenty four standardized resin models simulating curved canals(30 degree) were randomly placed into 2 groups and instrumented to a #30 master apical file size with Ni-Ti Profile .04 taper series using step down technique. Each groups was obturated with standardized gutta-percha cone by standard lateral condensation technique using SS finger spreader, NT finger spreader. And then, each model was sectioned horizontally with microtome at 1, 2, 3, 4, 5mm levels from the apex. At each of 5 levels, ratio of the area of gutta-percha was obtained by calculating the area of gutta-percha to the total area of the canal. The data collected were then analyzed statistically using a t test for independent samples. The results as follows ; 1. The total mean ratio of area of gutta-percha was 89.20${\pm}$7.00(%) for SS spreader group. 92.20${\pm}$5.17(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). 2. At 3mm level, the mean ratio of area of gutta-percha was 88.32${\pm}$5.41(%) for SS spreader group, 95.25${\pm}$2.60(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). At 1,2,4mm levels, NT spreader group showed greater mean ratio of area of gutta-percha than SS spreader group, too. But there was no statistically significant difference. 3. At 5mm level, the mean ratio of area of gutta-percha was 91.83${\pm}$3.42(%) for SS spreader group, 87.91${\pm}$3.68(%) for NT spreader group. There was statistically significant difference between each group(p<0.05). This study concluded that the NT spreader demonstrated somewhat favorable apical sealing effect than SS spreader in prepared curved canals. The clinical use of NT spreaders may enhance our ability to create better apical seals in curved canals, but further studies in this area will help clarify some of the remaining areas with which practitioners are concerned, such as compaction forces exerted by NT spreaders.

• Restorative Dentistry and Endodontics
• /
• v.32 no.5
• /
• pp.411-418
• /
• 2007

The most scientific and reliable method for deciding the tooth color is the instrumental measurement. However, such color measuring instrument shows the difference of the measuring value according to the diversified measuring condition. This study was conducted to evaluate what effect of the labial surface irregularity of the tooth to the result of the color measured by spectrometer. 11 models of the teeth were made by injecting the A2 shade Luxatemp Automix Plus (DMG, Germany) into the impression acquired from 11 adults. Standard disk samples (15 mm diameter, 7 mm thickness) were made with same material. CIE $L^*a^*b^*$ value was measured at the incisal, central, and gingival area of the central incisor, lateral incisor, canine and first premolar using Specbos 2100 (JETI, Germany) spectrometer. Color difference was calculated between labial surface and standard samples. Among all models of the teeth, $L^*\;and\;b^*$ value showed the reducing tendency as they go toward the gingival area, but $a^*$ value showed the increasing tendency. Color difference between model teeth and standard samples showed the most difference at the incisal area, but the gingival area showed the least difference. And the canine showed the least color difference from the comparison of standard sample, and the central incisor showed the highest difference (p < 0.01). Although the visually detectable difference of the measuring value showed notably depending on the type and measured area (p < 0.05), $L^*\;and\;a^*$ value showed notable differences depending more on the measured areas than on the type of the teeth.

• Restorative Dentistry and Endodontics
• /
• v.31 no.4
• /
• pp.300-311
• /
• 2006

The purpose of this study is to evaluate prospectively the effect of different bonding systems and retention grooves on the clinical performance of resin restorations in non-carious cervical lesions (NCCLs). Thirty-nine healthy adults who had at least 2 NCCLs in their premolar areas were included in this study. One hundred and fifty teeth were equally assigned to six groups: (A) Scotchbond Multi-Purpose (SBMP, 3M ESPE, St. Paul, MN, USA, 4th generation bonding system) without retention grooves; (B) SBMP with retention grooves; (C) BC Plus (Vericom Co., Anyang, Gyeonggido, Korea, 5th generation bonding system) without retention grooves; (D) BC Plus with retention grooves; (E) Adper Prompt (3M ESPE, Seefeld, Germany, 6th generation bonding system) without retention grooves; (F) Adper Prompt with retention grooves. All cavities were filled with a hybrid composite resin. Denfil (Vericom Co., Anyang, Gyeonggido, Korea) by one operator. Restorations were evaluated at baseline and at 6-month recall, according to the modified USPHS (United States Public Health Service) criteria. Additionally, clinical photographs were taken and epoxy resin replicas were made for SEM evaluation. At 6-month recall, there were some differences in the number of alpha ratings among the experimental groups. But, despite the differences in the number of alpha ratings, there was no significant difference among the 3 adhesive systems (p < 0.05). There was also no significant difference between the groups with or without mechanical retention (p < 0.05). Follow-ups for longer periods than 6 months are needed to verify the clinical performance of different bonding systems and retention grooves.