• Journal of Chest Surgery
• /
• v.25 no.3
• /
• pp.232-239
• /
• 1992

Acute renal failure is a well known serious complication following open heart surgery and is associated with a significant increase in morbidity and mortality rate. From 1984 to 1990, 33 patients who had acute renal failure following cardiopulmonary bypass received renal replacement therapy. PD[Peritonial dialysis] was employed in 11 patients and CAVH[continous arteriovenous hemofiltration] was employed in 22 patients. Their age ranged from 3 months to 64 years[mean 25.5$\pm$7.8 years]. The disease entities included congenital cardiac anomaly in 18, valvular heart disease in 15 and aorta disease in 2 cases. Low cardiac output was thought as a primary cause of ARF except two redo valve cases who showed severe Aemolysis k depressed renal function preoperatively. Mean serum BUN and creatinine level at the onset renal replacement therapy were 65$\pm$8 mg/dl and 3.5$\pm$0.4 mg/dl respectively, declining only after reaching peak level 7&10 days following the onset of therapy. Overall hospital mortality was 72.7%[24/33]; 81%[9/11] in PD group and 68.2% [15/22] in CAVH group respectively. The primary cause of death was low cardiac output & hemodynamic depression in all the cases. The fatal complications included multiorgan failure in 7, disseminated intravascular coagulation and sepsis in 6, neurologic damage in 4 and mediastinitis in 3 cases. No measurable differences were observed between CAVH and PD group upon consequence of acute renal failure and disease per se. The age at operation, BUN/Cr level at the onset of bypass and highest BUN/Cr level and the consequence of low output status were regarded as important risk factors, determining outcome of ARF and success of renal replacement therapy. Thus, we concluded that althoght the prognosis is largely determined by severity of low cardiac output status and other organ complication, early institution of renal replacement therapy with other intensive supportive measures could improve salvage rate in established ARF patients following CPB.

• Journal of the Korean Institute of Gas
• /
• v.13 no.1
• /
• pp.45-51
• /
• 2009

A safety assessment was performed through the process analysis of hydrogen station. The purpose of this study provides basic information for the standard establishment about hydrogen stations. The processes of hydrogen stations were classified by four steps (process of manufacture, compression, storage, charge). FMEA (Failure Mode and Effect Analysis) method was applied to evaluate safety. Each risk element is following; S (severity), O (occurrence), D (detection). And the priority of order was decided by using RPN (Risk Priority Number) value multiplying three factors. Scenarios were generated based on FMEA results. And consequence analysis was practiced using PHAST program. In the result of C.A, jet fire and explosion were shown as accident types. In case of leakage of feed line in PSA process, concentration of CO gas is considered to prevent CO gas poisoning when the raw material that can product CO gas was used.

• Journal of the Korean Society of Industry Convergence
• /
• v.5 no.2
• /
• pp.111-118
• /
• 2002

In GMAW(Gas Metal Arc Welding) processes, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality, Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWD (contact-tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using neuro-fuzzy algorithm. Neural networks was applied to design FLC(fuzzy logic control), The parameters of input membership functions and those of consequence functions in FLC were tuned through the method of learning by backpropagation algorithm, Bead geometry could he reasoned from welding current, arc voltage, travel speed on FLC using the results learned by neural networks. On the developed inference system of bead geometry using neuo-fuzzy algorithm, the inference error percent of bead width was within ${\pm}4%$, that of bead height was within ${\pm}3%$, and that of penetration was within ${\pm}8%$, Neural networks came into effect to find the parameters of input membership functions and those of consequence in FLC. Therefore the inference system of welding quality expects to be developed through proposed algorithm.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.7
• /
• pp.378-388
• /
• 2000

In this paper, we propose Fuzzy Polynomial Neural Networks(FPNN) based on Polynomial Neural Networks(PNN) and Fuzzy Neural Networks(FNN) for model identification of complex and nonlinear systems. The proposed FPNN is generated from the mutually combined structure of both FNN and PNN. The one and the other are considered as the premise part and consequence part of FPNN structure respectively. As the consequence part of FPNN, PNN is based on Group Method of Data Handling(GMDH) method and its structure is similar to Neural Networks. But the structure of PNN is not fixed like in conventional Neural Networks and self-organizing networks that can be generated. FPNN is available effectively for multi-input variables and high-order polynomial according to the combination of FNN with PNN. Accordingly it is possible to consider the nonlinearity characteristics of process and to get better output performance with superb predictive ability. As the premise part of FPNN, FNN uses both the simplified fuzzy inference as fuzzy inference method and error back-propagation algorithm as learning rule. The parameters such as parameters of membership functions, learning rates and momentum coefficients are adjusted using genetic algorithms. And we use two kinds of FNN structure according to the division method of fuzzy space of input variables. One is basic FNN structure and uses fuzzy input space divided by each separated input variable, the other is modified FNN structure and uses fuzzy input space divided by mutually combined input variables. In order to evaluate the performance of proposed models, we use the nonlinear function and traffic route choice process. The results show that the proposed FPNN can produce the model with higher accuracy and more robustness than any other method presented previously. And also performance index related to the approximation and prediction capabilities of model is evaluated and discussed.

• Korean Journal of Social Welfare
• /
• v.62 no.4
• /
• pp.149-170
• /
• 2010

The purpose of this study to develop a human rights education program for improving human rights sensitivity of the teachers in community child center, and verify its effectiveness. For this purpose, pre-program and post-program analysis was conducted by using human rights sensitivity scale on 102 teachers working in community child center. The major results of this study is as follows: First, the teachers' human rights sensitivity was statistically improved. Second, the teachers' ability of situation perception, ability of consequence perception, and ability of consequence perception were statistically improved. Third, the teachers' human rights sensitivity on "the right not to be arrested illegally", "physical liberty of the disabled", "the right to labor by migrant workers", and "freedom from detention" was statistically improved. Based on the research results, practical implications and limitations were discussed for developing human rights education program.

• Nuclear Engineering and Technology
• /
• v.49 no.2
• /
• pp.411-425
• /
• 2017

Using a probabilistic safety assessment, a risk evaluation framework for an aircraft crash into an interim spent fuel storage facility is presented. Damage evaluation of a detailed generic cask model in a simplified building structure under an aircraft impact is discussed through a numerical structural analysis and an analytical fragility assessment. Sequences of the impact scenario are shown in a developed event tree, with uncertainties considered in the impact analysis and failure probabilities calculated. To evaluate the influence of parameters relevant to design safety, risks are estimated for three specification levels of cask and storage facility structures. The proposed assessment procedure includes the determination of the loading parameters, reference impact scenario, structural response analyses of facility walls, cask containment, and fuel assemblies, and a radiological consequence analysis with dose-risk estimation. The risk results for the proposed scenario in this study are expected to be small relative to those of design basis accidents for best-estimated conservative values. The importance of this framework is seen in its flexibility to evaluate the capability of the facility to withstand an aircraft impact and in its ability to anticipate potential realistic risks; the framework also provides insight into epistemic uncertainty in the available data and into the sensitivity of the design parameters for future research.

• Journal of Technologic Dentistry
• /
• v.39 no.4
• /
• pp.285-294
• /
• 2017

Purpose: This study was carried out in order to examine organizational commitment in dental technicians and turnover intention level according to it, and to analyze its effects. Methods: A self-reported questionnaire survey was carried out by having convenience sampling as 200 dental technicians. An analysis of the collected data was computationally processed by using SPSS Win 19.0 program. An analytical technique was made by using statistical techniques such as frequency & percentage, t-test, One-way ANOVA analysis. The following are the analytical results of the collected materials. Results: In consequence of analyzing organizational commitment level in research subjects, there was a significant difference in the items for age, task field, job position in charge, career in dental laboratory technology, and monthly income(p<.05). The average of the item for organizational commitment level stood at 3.29, thereby having been indicated to be high. As a result of analyzing turnover intention level in research subjects, there was a significant difference in the items for task field, job position in charge, career in dental laboratory technology, and monthly income(p<.05). The average of the item for turnover intention reached 3.04, thereby having appeared to be relatively high. As for a correlation between organizational commitment and turnover intention, all variables were shown to have inverse correlation at a significant level. In consequence of conducting regression analysis in order to analyze the influence of organizational commitment upon turnover intention, a factor of having the most impact on turnover intention appeared to be normative commitment. The test value of the model was statistically significant. The explanation power about this was indicated to be 26.9%. Conclusion : In the above findings, the dental technicians are considered to need to be immersed in work with a sense of mission in performing job in charge, to strive to possibly have an opportunity of achievement and self-growth, and to perform a research and development in a manpower management strategy such as turnover prevention.

• Journal of the Korean Institute of Gas
• /
• v.20 no.2
• /
• pp.49-57
• /
• 2016

Aqueous ammonia is widely used in household cleaners, fertilizers and denitrification process. It is usually treated in concentrations from 10 % to 30 %, and release accidents have occurred frequently. In this study, we developed a simplified estimating method and equation to calculate threat zone easily in case of emergency due to release accident of aqueous ammonia. We calculated the consequence distance for toxic endpoints of aqueous ammonia(concentration 10 % ~ 30 %) at different puddle areas($1m^2{\sim}500m^2$) using the ALOHA program. Based on the result, we analyzed the relationship between concentration and puddle area with the threat zone and created the equation.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.52-58
• /
• 2017

One of the most important elements of the management of chemical accident is threat zone estimation of fires, explosions and toxic gas dispersion based on chemical releases. The threat zone estimation is going to be standard of emergency response for the first defender and base line data of off-site risk assesment (hereinafter referred to as "ORA") and risk management plan (hereinafter referred to as "RMP"). Generally, ALOHA form EPA(U.S.) and Kora(from KOREA MINISTRY OF ENVIRONMENT) has been used for the off-site consequence analysis in Korea. However it is hard to predict accurate consequences rapidly in case of emergency. Hydrochloric acid is a multipurpose raw material used in many industrial applications such as chemical, metal and food industries. It is usually treated in concentrations from 10 ~ 35 %, and release accident have occurred frequently. In this study, we have developed a simplified estimating method and equation to calculate threat zone easily in case of emergency due to release accident of hydrochloric acid.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.201-211
• /
• 1997

In light of the problem of imported apparel that tends to increase rapidly this study was intended to inquire into the assessment of male and female college students about the brands of imported apparel relative to dom-estic apparel based on quality perception price pirceptionand social psychological perception. And it is concerned with making a compara-tive study of the difference in consumer's con-sciousness of clothing between subjects by dividing them into the group of preference for imported apparel the group of non-preference for it on the basis of their ratings. As a consequence the following study results were obtained. 1) As a result of comparing college students' ratings for quality perception price perception and social psychological perception of impor-ted apparel all three factors were shown to have the high average value in care of the group of preference for imported apparel and to have a significant difference between groups. 2) As a consequence of making a compara-tive study of the difference in the clothing at-titude between groups the group of prefer-ence for imported apparel showed the high av-erage value about brand preference and identi-fication clothing involvement and interper-sonal perception through clothing and to hjave a significant difference with the group of pref-erence for imported apparel in terms of the peripheral environment and the place of pur-chase. 3) As a result of making a comparison of the difference in demographic factors between groups it was analyzed that female clollege students especially college women in the departments of art and physical education had the higher preference for imported apparel. And it was shown that they had the higher preference for imported apparel the greater amount of pocket money they had. Broader and deeper studies are required to be made about imported apparel in a multifaceted way. Therefore follow-on studies will have to be actively conducted such as a study of con-sumer's evaluation about imported apparel and domestic apparel charged at th same range of prices and a study of the difference on con-sumer's consciousness of imported apparel found over age span of consumers.