• Structural Engineering and Mechanics
• /
• v.89 no.2
• /
• pp.213-223
• /
• 2024

This paper proposes a composite design of fuzzy adaptive control scheme based on TMD RC structural system and the gain of two-dimensional fuzzy control is controlled by parameters. Monitoring and learning in LMI then produces performance indicators with a weighting matrix as a function of cost. It allows to control the trade-off between the two efficiencies by adjusting the appropriate weighting matrix. The two-dimensional Boost control model is equivalent to the LMI-constrained multi-objective optimization problem under dual performance criteria. By using the proposed intelligent control model, the fuzzy nonlinear criterion is satisfied. Therefore, the data connection can be further extended. Evaluation of controller performance the proposed controller is compared with other control techniques. This ensures good performance of the control routines used for position and trajectory control in the presence of model uncertainties and external influences. Quantitative verification of the effectiveness of monitoring and control. The purpose of this article is to ensure access to adequate, safe and affordable housing and basic services. Therefore, it is assumed that this goal will be achieved in the near future through the continuous development of artificial intelligence and control theory.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12B
• /
• pp.2407-2414
• /
• 1999

This paper introduces the concept of warped discrete cosine transform (WDCT) and an image compression algorithm based on the WDCT. The proposed WDCT is a cascade connection of a conventional DCT and all-pass filters whose parameters can be adjusted to provide frequency warping. In the proposed image compression scheme, the frequency response of the all-pass filter is controlled by a set of parameters with each parameter for a specified frequency range. For each image block, the best parameter is chosen from the set and is sent to the decoder as a side information along with the result of corresponding WDCT computation. For actual implementation, the combination of the all-pass IIR filters and the DCT can be viewed as a cascade of a warping matrix and the DCT matrix, or as a filter bank which is obtained by warping the frequency response of the DCT filter bank. Hence, the WDCT can be implemented by a single matrix computation like the DCT. The WDCT based compression, outperforms the DCT based compression, for high bit rate applications and for images with high frequency components.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.5
• /
• pp.209-214
• /
• 2018

In this paper, we recognize the damage caused by a disaster to a facility in the event of a large-scale disaster and present the possible disasters in the form of a matrix. The typhoon was selected as a major disaster and covered mainly the flood damage, a possible damage caused by the typhoon. Flood damage is mainly caused by flooding, and damage is determined by flooding and flow rate, and the results of applying this to low-rise facilities are derived. In addition, the results were derived by applying a method of classification of disaster types in a matrix format to make it easy to see at a glance the connection between disasters caused by damage to a facility. Continuing research in the form presented in this paper will help us identify additional disasters as an occurrence of a disaster.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.9
• /
• pp.149-156
• /
• 2012

The Fabric Electrode was proposed for the effective production of the display based on electrowetting in this paper and designed the source driver of flexible display which could be driven by the electrowetting cell. The electrowetting cell matrix was implemented on the substrate(PET) by imprinting. The driver fabric, wetting electrode fabric and conductive fabric was placed horizontally and vertically in the groove between cell matrix and the electrowetting cell matrix can be driven by the cross-point as electric connection. The integration density of driver module is decreased because using the R/2R DAC module per channel in the conventional method. The proposed method could utilize the effective production process and reduce the production price of a display panel. The source driver which consume lower power and can increase the integration density because of reducing the number of driver device per channel was designed and evaluate the driver operation by the simulation using the VHDL programming in this paper.

• Architectural research
• /
• v.13 no.2
• /
• pp.13-21
• /
• 2011

Since 2002, Architecture Schools in Korea was changing long traditional architectural education system from 4 years generalized architectural engineering curriculum to 5 years professional architecture program. Until 2010, 76 architecture schools have changed their program to 5 years course which was focused to design studio education. It was a very rapid change and there was not much time develop their own system which could represent institutional identity, character of students and local environment. Korea joined as a regular member of Canberra Accord in 2010 and it is meaningful to compare Korean architecture program contents to another country education contents. US architecture programs were selected for this comparison study. The goals of this study are to create a comparable understanding the form of contents of Architectural Education in US and Korea and to verify the substantial equivalence of these systems. To achieve above goals, three public institutes of each country were selected and analyzed with general information, history, resources, curriculum and the matrix of Student Performance Criteria for quantitative comparison. For qualitative comparison education context of programs were analyzed with program missions, the way of advising, professional connection and distribution of faculty loads.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.14 no.1
• /
• pp.29-34
• /
• 2010

The QR method is one of the most common methods for calculating the eigenvalues of a square matrix, however its understanding would require complicated and sophisticated mathematical logics. In this article, we present a simple way to understand QR method only with a minimal mathematical knowledge. A deflation technique is introduced, and its combination with the power iteration leads to extracting all the eigenvectors. The orthogonal iteration is then shown to be compatible with the combination of deflation and power iteration. The connection of QR method to orthogonal iteration is then briefly reviewed. Our presentation is unique and easy to understand among many accounts for the QR method by introducing the orthogonal iteration in terms of deflation and power iteration.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.2
• /
• pp.141-146
• /
• 1999

The eigenvalue equations of multiple waveguides with step-index profile are derived by using the WKB theory. Phase changes unique to step-index discontinuity areintroduced when applying the WKB connection formula to turning points. The transfer matrix method is employed for the analysis of multiple structure and the derived eigenvalue equation are represented in the recursive form. The results by the WKB are compared with those by the FEM for a three-waveguide coupler.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.5
• /
• pp.123-133
• /
• 1994

This paper presents an output arbitrator for input buffering ATM (Asynchronous Transfer Mode) switches using neural networks. To avoid blocking in ATM switches with blocking characteristics, it is required to buffer ATM cells in input buffer and to schedule them. The N$\times$N request matrix is divided into N/16 submatrices in order to get rid of internal blocking systematically in scheduling phase. The submatrices are grouped into N/4 groups, and the cells in each group are switched alternatively. As the window size of input buffer is increases, the number of input cells switched in a time slot approaches to N. The selection of nonblocking cells to be switched is done by neural network modules. N/4 neural network modules are operated simultaneously. Fast selection can be achieved by massive parallelism of neural networks. The neural networks have 4N neurons and 14N connection. The proposed method is implemented in C language, and the simulation result confirms the feasibility of this method.

• Journal of Korean Association for Spatial Structures
• /
• v.6 no.3 s.21
• /
• pp.131-137
• /
• 2006

This study presents a new stress analysis method to be substituted for the elastic analysis in such a plastic design procedure. This method is accompanied by an efficient mathematical tool which can be easily handled by personal computer. The method also easily accepts arbitrary strategies by the designer for selection member size.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.552-556
• /
• 1989

The line equations can be expressed by a set of nonhomogeneous differential equation where forcing terms of these equations have been adopted. Equivalent-circuit representations of this paper are derived from solutions of the equations. The contribution of the external wave to the line is expressed in terms of ideal sources in the form of a cascade connection to the line. These representations art conveniently applicable to the various types of transmission lines because these Lines can often be written in the form of a chain matrix.