• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.10a
• /
• pp.89-94
• /
• 1990

This study was performed to verify the behavior of channel type PC bridge through the full scale model test. It is well known that the behavior of connection is especially important in case of precast multi-beam bridges. In this study, the lateral load distribution capacity was found satisfactory and influenced little either by the type or strength of connections. Analysis results agreed well with test results. Parameter studies were performed based on the test and analysis results.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.17-20
• /
• 2000

In a digital communication system, the transmission channel may introduce error into the digital signal being transmitted. It would be useful if a process could be devised so that the error could be removed in order to recover the transmitted digital signal. We design a corrective filter that is inverse filter, which will generate an output signal identical to the input signal. in order for two systems connected in cascade to produce an output which is identical to the input signal, the over-all unit sample response of the cascade connection must be a unit sample function.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.1
• /
• pp.17-22
• /
• 2001

The floating-gate MOSFETs were fabricated by employing 1.5 m n-well CMOS process and their optical-electrical properties were characterized for the application to CMOS image sensor system. Based on the simulation of energy band diagram and operating mechanism of parasitic BJT were proposed as solutions for the increase of photo-current value. In order to realize them, MOSFETs having multi-gate and channel structures were fabricated and 60% increase in photo-current was achieved through enlargement of depletion layer and parallel connection of parasitic BJTs by channel division.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.288-300
• /
• 2006

In this paper, we consider a channel ordering problem that seeks to minimize the total interference in mobile radio networks. If a base station receives connection request from a mobile user, one of the empty channels that are fixed to the base station is assigned to the mobile user. Among several channels available, we can choose one that seems to make least interference with other channels assigned to adjacent base stations. However, a pair of channels that are not separated enough do not generate interference if both of them are not simultaneously used by mobile users. That is, interference between channels may vary depending on the channel assignment sequence for each base station and on the distribution of mobile users. To find a channel assignment sequence that seems to generate minimum interference, we develop an optimization model considering various scenarios of mobile user distribution. Simulation results show that channel assignment sequence determined by the scenario based optimization model significantly reduces the interference provided that scenarios and interference costs are properly generated.

• Journal of Communications and Networks
• /
• v.6 no.3
• /
• pp.245-257
• /
• 2004

Driven by the growing number of the mobile subscribers, efficient channel resource management plays a key role for provisioning multimedia service in the next generation personal communication systems. To reuse limited channel resources, diminishing the coverage areas of cells seems to be the ultimate solution. Thus, however, causes more handover events. To provide seamless connection environment for mobile terminals and applications, this article presents a novel handover scheme called the intelligent channel reservation (ICR) scheme, which exploits the location prediction technologies to accurately reserve channel resources for handover connections. Considering the fact that each mobile terminal has its individual mobility characteristic, the ICR scheme utilizes a channel reserving notification procedure (CRNP) to collect adequate parameters for predicting the future location of individual mobile terminals. These parameters will be utilized by the handover prediction function to estimate the expected handover blocking rate and the expected number of idle channels. Based on the handover prediction estimations, a cost function for calculating the damages from blocking the handover connections and idling channel resources, and a corresponding algorithm for minimizing the cost function are proposed. In addition, a guard channel decision maker (GCDM) determines the appropriate number of guard channels. The experimental results show that the ICR scheme does reduce the handover-blocking rate while keeping the number of idle channels small.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.417-425
• /
• 2005

KOINONIA is high-rate Wireless Personal Area Network (WPAN) technology, and is developed for multimedia traffic transmission in personal area. A KOINONIA piconet is a collection of one or more associated slaves under a single master. Efficient scheduling of a master for the traffic of slaves is essential to use channel effectively and to guarantee QoS of multimedia traffic. We propose a new scheduling algorithm to allocate channel time at desired intervals regardless of superframe length, and a Connection Admission Control(CAC) algorithm to regulate the number of traffics in a piconet. Our proposed algorithms have been shown to save channel time and to meet QoS requirements compared to the conventional weighted round-robin algorithm.

• The Journal of the Korea Contents Association
• /
• v.9 no.12
• /
• pp.515-527
• /
• 2009

IEEE 802.11n is an ongoing next-generation WLAN(Wireless Local Area Network) standard that supports a very high-speed connection with more than 100Mb/s data throughput measured at the MAC(Medium Access Control) layer. Study trends of IEEE 802.11n show two aspects, enhanced data throughput using aggregation among packets in MAC layer, and better data rates adapting MIMO(Multiple-Input Multiple-Output) in PHY(Physical) layer. But, the former doesn't consider wireless channel and the latter doesn't consider aggregation among packets for reality. Therefore, this paper analyzes data throughput for IEEE 802.11n considering MAC and PHY connection. A-MPDU(Aggregation-MAC Protocol Data Unit) and A-MSDU(Aggregation-MAC Service Unit) is adapted considering multi-service in MAC layer, WLAN MIMO TGn channel using SVD(Singular Value Decomposition) is adapted considering MIMO and wireless channel in PHY layer. Consequently, Simulation results shows throughput between A-MPDU and A-MSDU. Also, We use Ns-2(Network simulator-2) for reality.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.11S
• /
• pp.3367-3378
• /
• 1999

ATM technology, which acts as a representative high-speed bandwidth technology, plays an important role in Internet environment. ATM network, supporting QoS(Quality of Service) and various traffic characters in high speed, configures many VPC(Virtual Path Connection)/VCC(Virtual Channel Connection). It is important to guarantee the QoS of each connection and it is necessary for the network manager to search element affecting the QoS of VPC/VCC and to control ATM network correctly. In the paper, the management information of VPC/VCC, that ATM network manager Using the fault notification for ATM switch, we can manage the configuration, fault and performance of ATM network. Thus, we extracted the configuration, fault and performance monitoring item from the ATM-MIB and SNMP M4 Network Element View MIB. And we designed the ATM network configuration, fault and performance management system based on the extracted item.

• The Journal of Advanced Prosthodontics
• /
• v.11 no.2
• /
• pp.105-111
• /
• 2019

PURPOSE. Limited data is available regarding the differences for possible microleakage problems and fitting accuracy of zirconia versus titanium abutments with various connection designs. The purpose of this in vitro study was to investigate the effect of connection design and abutment material on the sealing capability and fitting accuracy of abutments. MATERIALS AND METHODS. A total of 42 abutments with different connection designs [internal conical (IC), internal tri-channel (IT), and external hexagonal (EH)] and abutment materials [titanium (Ti) and zirconia (Zr)] were evaluated. The inner parts of implants were inoculated with $0.7{\mu}L$ of polymicrobial culture (P. gingivalis, T. forsythia, T. denticola and F. nucleatum) and connected with their respective abutments under sterile conditions. The penetration of bacteria into the surrounding media was assessed by the visual evaluation of turbidity at each time point and the number of colony forming units (CFUs) was counted. The marginal gap at the implant- abutment interface (IAI) was measured by scanning electron microscope. The data sets were statistically analyzed using Kruskal-Wallis followed by Mann-Whitney U tests with the Bonferroni-Holm correction (${\alpha}=.05$). RESULTS. Statistically significant difference was found among the groups based on the results of leaked colonies (P<.05). The EH-Ti group characterized by an external hexagonal connection were less resistant to bacterial leakage than the groups EH-Zr, IT-Zr, IT-Ti, IC-Zr, and IC-Ti (P<.05). The marginal misfit (in ${\mu}m$) of the groups were in the range of 2.7-4.0 (IC-Zr), 1.8-5.3 (IC-Ti), 6.5-17.1 (IT-Zr), 5.4-12.0 (IT-Ti), 16.8-22.7 (EH-Zr), and 10.3-15.4 (EH-Ti). CONCLUSION. The sealing capability and marginal fit of abutments were affected by the type of abutment material and connection design.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.2
• /
• pp.173-180
• /
• 2017

Omni-channel strategy is an innovative paradigm for integrated information distribution of inventory, sales, operations, marketing, delivery, pickups and returns in supply chain management. Recently the distribution strategy faces new challenges with the advent of mobile distribution channels. Social media with countless apps imposes additional stress on supply chain operations. Due to these changes, distribution network in supply chain is changing naturally and rapidly from multi-channel to omnni-channel platform. Recently numerous domestic distributors establish and adapt this new supply chain optimization tool as a part of seamless flow of movements of goods from one channel to other channels. The objective of this paper is to present a preliminary findings on how omnni-channel affects the supply chain management. A survey is used to ascertain in the degree of omnni-channel implementation and statistical evidence is provided to test sets of hypothesis. The results of the questionnaire showed that consumers' purchasing styles differed by gender, age, purchase purpose, and product type. In particular, women consider purchasing experience in omni-channel to be important. As food and household goods can be conveniently shipped, consumers prefer online purchasing it. Conversely, consumers tend to favor omni-channel strategy in connection with offline experience in IT products.