• Nuclear Engineering and Technology
• /
• 제20권1호
• /
• pp.1-8
• /
• 1988

상업용 발전소의 가동시, 출력 변화에 의해 1차 계통 보론 농도의 변화가 요구되었을 때 CVCS보충 시스템에서의 보충 유량이 연속 방정식과 질량 평형 방정식을 이용하여 측정된다. 이를 위하여, 1차 계통, 가압기, 그리고 volume control tank가 각각 질량과 보론 농도를 가진 control volume으로 그리고 1차측과 가압기, CVCS를 연결하는 파이프들이 시간 지연 요소로 모델화 되었다. 14-2-6-2 (출력변화 100-50-100) 부하 추종운전의 경우(7호기 EOL에서)를 이 모델을 이용하여 계산하였다.

• 환경영향평가
• /
• 제18권5호
• /
• pp.271-280
• /
• 2009

The objective of this study is to develop a reliable flow forecasting model based on neural network algorithm in order to provide flow rate at stream sections without flow measurement in Nakdong river. Stream flow rate measured at 8-days interval by Nakdong river environment research center, daily upper dam discharge and precipitation data connecting upstream stage gauge were used in this development. Back propagation neural network and multi-layer with hidden layer that exists between input and output layer are used in model learning and constructing, respectively. Model calibration and verification is conducted based on observed data from 3 station in Nakdong river.

• 대한안전경영과학회지
• /
• 제21권4호
• /
• pp.1-6
• /
• 2019

This study relates to acquiring biological signal without attaching directly to the user using UWB(Ultra Wide Band) radar. The collected information is the respiratory rate, heart rate, and the degree of movement during sleep, and this information is used to measure the sleep state. A breathing measurement algorithm and a sleep state detection algorithm were developed to graph the measured data. Information about the sleep state will be used as a personalized diagnosis by connecting with the medical institution and contribute to the prevention of sleep related diseases. In addition, biological signal will be linked to various sensors in the era of the 4th industrial revolution, leading to smart healthcare, which will make human life more enriching.

• 한국정밀공학회지
• /
• 제23권8호
• /
• pp.108-118
• /
• 2006

Reusing is one of the most environmentally friendly recycling methods. For the economical remanufacturing of used cellular phone, the cellular phones should be design for easy disassembly. In this paper, we analyzed the components and connecting elements of cellular phones and developed a guideline for the design of the cellular phones. A software for the disassembly assessment was also developed. Redesigned cellular phone by the developed guideline and its original phone was analyzed by the disassembly assessment software. Disassembly time could be reduced about 40% and reusing rate could be improved about 37%.

• 한국멀티미디어학회논문지
• /
• 제17권5호
• /
• pp.573-581
• /
• 2014

The salient features of UWB(Ultra WideBand) networks such as high-rate communications, low interference with other radio systems, and low power consumption bring many benefits to users, thus enabling several new applications such as wireless universal serial bus (WUSB) for connecting personal computers (PCs) to their peripherals and the consumer-electronics (CE) in people's living rooms. Because the size of multimedia data frame, WiMedia device must transmit the fragment of MSDU. However, when the fragment of MSDU is lost, WiMedia device maintains active mode for the time to complete the transmission MSDU, and there is a problem that unnecessary power consumption occurs. Therefore we propose new power management scheme to reduce unnecessary power consumption of WiMedia devices in the case that the fragment is lost.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.514-517
• /
• 1996

Zero current switching(ZCS) series resonant converter is used to control laser power density in a pulsed Nd:YAG laser power supply. The high power and high repetition rate paused Nd:YAG laser is designed and fabricated to control current pulse width and pulse repetition rate in the double elliptical laser oscillator. In order to find out operational characteristics of pulsed Nd:YAG laser, the electrical properties of driving power supply and laser output power are investigated and experimented by changing of the current pulse width from 200uS to 350uS(step 50uS) and pulse repetition rate range of 500pps(pulse per second) to 1150pps. From that result, we obtaind maximum efficiency of 1.83% and maximum laser output or 220W at the condition of 350 uS and 1150pps with one Nd:YAG rod), and obtained that of more than 400W with two laser head connecting series.

• 태양에너지
• /
• 제7권2호
• /
• pp.37-53
• /
• 1987

This study has been prepared for the purpose of developing the system performance prediction method of natural circulation solar hot water system. The storage tank of the natural circulation solar hot water system equipped with flat-plate solar collector is located at higher elevation than the solar collectors. Therefor, the storage tank temperature distribution formed accordance with configuration of storage tank by flow rate of circulating fluid affect system collection efficiency. In this study measure the storage tank temperature distribution with various experimental system under real sun condition and present the theoretical prediction method of the storage tank temperature. Moreover measure the flow rate not only day-time but also night-time reverse flow rate with die injection visual flow meter. Main conclusion obtain from the present study is as follows; 1) The storage tank temperature distribution above the connecting pipe connection position is the same as that of the fully mixed tank and below the connection position is the same as that of stratified tank. 2) The system performance sensitive to the storage tank temperature distribution. Therefore detailed tank model is necessary. Average storage tank temperature can be calculate 3% and storage tank temperature profile can get less than 10% difference with this model system.

• 경영과학
• /
• 제24권2호
• /
• pp.127-142
• /
• 2007

This study deals with the optimal design of mobile access network connecting base stations(BSs) and mobile switching centers(MSCs). Generally mobile operators constitute their access networks by leasing communication lines. Using the characteristic of leased line rate based on administration region, we build an optimization model for mobile access network design which has much smaller number of variables than the existing researches. And we develop a GUI based optimization tool integrating the well-known softwares such as MS EXCEL. MS VisualBasic, MS PowerPoint and Ip_solve, a freeware optimization software. Employing the current access network configuration of a Korean mobile carrier, this study using the optimization tool obtain an optimal solution for both single MSC access network and nation-wide access network. Each optimal access network achieves 7.45% and 9.49% save of lease rate, respectively. Considering the monthly charge and total amount of lease line rate, our optimization tool provides big amount of save in network operation cost. Besides the graphical representation of access networks makes the operator easily understand and compare current and optimal access networks.

• 한국지형학회지
• /
• 제25권2호
• /
• pp.31-42
• /
• 2018

This study analyzes the spatial distribution of the highest level terrace which can be regarded as an initial land surface before the uplift of the Taebaek Mountains and estimates spatial characteristics of the incision and uplift rates around the Mountains. The altitude above the riverbed of the 54 highest level terraces seems to be greatly influenced by the incision of large stream and their elevation shows a high correlation with the uplift of the Mountains. The elevation of the terraces in the north and middle parts decreases westward with a rate of 5~6 m/km and meets with the sea level at area 100~120 km apart from the Mountains. Therefore, it can be suggested that the west coast of Korea might have generally experienced subsidence during the Quaternary. The elevation of the terraces suggests that area with a direction of N-S or NNW-SSE from Yeoryang-myeon, Jeongseon-gun to Taebaek-si shows the highest uplift rate around the Mountains and area with a direction of N-S connecting Girin-myeon, Inje-gun and Pyeongchang-eup, Pyeongchang-gun also indicates a high uplift rate.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1680-1686
• /
• 2009

삼각 분리 막대형 차압 유량계 압력 탭의 가공 조건에 따른 유량 특성을 연구하였다. 삼각 분리 막대탭 차압 유량계에 가공한 압력 탭의 크기는 1.0 mm 또는 1.5 mm로 하였다. 압력 탭의 개수는 5개 또는 17개로 가공하였다. 삼각 분리 막대탭 차압 유량계와 층류유량계를 직결한 후 유량 특성을 검정하였다. 삼각 분리 막대탭 차압 유량계의 질량 유량을 무차원 파라미터 H를 사용하여 나타내었다. H는 TSB 유량계에서의 배압, 기체 온도, 유량계 상류압과 하류압 간의 차압을 포함하는 무차원 파라미터이다. TSB 유량계의 질량 유량과 H 간에는 선형적 관계를 보였다. 압력 탭의 개수 보다는 압력 탭의 직경이 TSB 차압유량계의 유량 특성에 더 큰 영향을 미쳤다.