• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.719-722
• /
• 2002

The Displacement current measurement system used in this experiment because detecting the dynamic behavior of monolayers at the air-water interface is possible. It basically consists of a film balance, a pair of electrodes connected to each other through a sensitive ammeter. Here, one electrode is suspended in air and the other electrode is placed in the water. PBLG phase transformation measured by Maxwell-displacement-current-measurement method in surface of the water. Measured (surface pressure, displacement current and dipole moment) of monolayers of PBLG on the water surface. We measured displacement current that occur when changed temperature. Could know that displacement current is proportional in increase of temperature and great as experiment result.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1530-1532
• /
• 2001

The displacement current measuring system used for detecting the dynamic behavior of monolayers at the air-water interface is described. It basically consists of a film balance, a pair of electrodes connected to each other through a sensitive ammeter. Here, one electrode is suspended in air and the other electrode is placed in the water. With Maxwell-displacement-current-measuring method, the phase transitons of Poly-$\gamma$-benzyl p-glutamate (PBDG) on a water surface were detected. Measured surface pressure, displacement current and dipole moment of monolayers of PBDG on the water surface. Also, we measured that compression velocity(30, 40, 50[mm/min]) when the sample spread volume was about 400[ul]. From the result, it is known that current is generated in the range of high surface pressures as compression velocity become faster.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.41.2-41.2
• /
• 2019

The aim of this study is to demonstrate the subsurface origin of the complex observed evolution of the solar active region 10930 (AR10930) associated with merging and breakup of magnetic polarity regions at the solar surface. This is important for a comprehensive understanding of observed properties of the active region, because subsurface magnetic flux and subsurface dynamical processes are seamlessly connected to surface magnetic flux and surface dynamical processes, respectively. In other words, the solar surface does not behave as an impermeable boundary towards magnetic flux and dynamical processes. In this talk, we show a magnetohydrodynamic (MHD) model of merging and fragmentation in AR10930. We then discuss what physical processes could be involved in the characteristic evolution of an active region magnetic field that leads to the formation of a sunspot surrounded by satellite polarity regions.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.10
• /
• pp.47-55
• /
• 2009

In this study, a robot foot having toes for firm stepping on uneven surface is proposed. The toes are connected to the lower leg by parallel links so that the lower leg can rotate in the rolling and pitching directions during stance phase without ankle joint. The landing performance of the foot on uneven surface was evaluated by relative comparison with that of the most common foot making point contact with the walking surface, since the test conditions considering real uneven surface could be hardly defined for its objective evaluation. Anti-slip margin(ASM) was defined in this study to express the slip resistance of a robot foot when it lands on a projection with half circular-, triangular- or rectangular cross section, assuming that uneven surface consists of projections having these kind of cross sections in different sizes. Based on the ASM analysis, the slip conditions for the two feet were experimentally confirmed. The results showed that the slip resistance of the new foot is not only higher than that of the conventional point contact type foot but also less sensitive to the surface friction coefficient.

• Korean Journal of Remote Sensing
• /
• v.22 no.1
• /
• pp.11-24
• /
• 2006

Coastal sea surface temperature (CSST) and meteorological data from January through December 1995 are used to estimate the net surface heat flux and heat content for Sendai Bay. The average annual surface heat flux in the area north of the bay is estimated to be $+35Wm^{-2}$, whereas the southwestern area is estimated to be $+56Wm^{-2}$. Therefore, the net surface heat flux shows a net gain of heat over the whole bay. The largest heat gain occurs near Matsukawaura, where the strong Kuroshio/Oyashio interaction produces anomalously cold SST and wind is more moderate than in other regions of Sendai Bay over most of the year. The lowest heat gain occurs around Tashiro Island, where the temperature difference between air and sea surface is lower and wind is stronger. The heat budget shows that both surface forcing and horizontal advection are potentially important contributors to the seasonal evolution of CSST in the bay. From the A VHRR and SeaWiFS data, it is found that offshore conditions between the bay and Eno Island are different due to the presence of the Ojika Peninsula. It is also shown that the temporal behaviors of SSTs in the bay are closely connected with the air-sea heat flux and offshore conditions.

• Journal of Navigation and Port Research
• /
• v.44 no.2
• /
• pp.136-143
• /
• 2020

Maritime autonomous surface ships (MASS) has been developed over the years. But, there are many unresolved problems. To overcome these problems, this study proposes connected ship navigation system. The system comprises a slave ship and a master ship that leads the slave ship. To implement this system, communication network, route planning algorithms, and controllers are designed. The communication network is built using the transmission control protocol/Internet protocol (TCP/IP) socket communication method to exchange data between ships. The route planning algorithms calculate the course and distance of the slave ship using the middle latitude sailing method. Nomoto model is used as the mathematical model of the slave ship maneuvering motion. Then, the autoregressive with exogenous variables (ARX) model is used to estimate the parameters of Nomoto model. Based on the above model, the automatic steering controller is designed using a proportional-derivative (PD) control. Also, the speed controller is designed for the slave ship to maintain constant distance from the master ship. Sea experiments are conducted to verify the proposed system with two remodeled boats.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.575-581
• /
• 1988

To integrate the two-dimensional Navier-Stokes equations numerically in multiply-connected flow regions, the vorticity-stream function formulation is used. The steady stream function value at the surface of the multibody, initially unknown, has been determined interactively by introducing a line integral which requires the single-valuedness of pressure at each interaction step. This procedure is relatively simpler and more efficient than the primitive variable formulation which requires much more computing time and shows poor convergence. Three doubly-connected flow problems are defined and numerically analyzed by the present method. The results have been compared either with earlier existing ones or with the experimental interferograms to demon-strate the validity of the presented method.

• Journal of Biosystems Engineering
• /
• v.14 no.4
• /
• pp.221-228
• /
• 1989

A data acquisition system was designed to measure the forces on a rolling coulter in three coordinated directions, angular velocity of the coulter and travel speed of a soil bin. The data acquisition system consisted of a dynamometer, speed transducers, a signal conditioner, an inter-face board, an Aim-65 microcomputer and a digital data recorder. Strain gages were attached on the surface of the dynamometer and connected to form three Wheatstone bridges, which measure the draft force, the vertical force and the side force on the coulter. An interaction among three dimensional forces was found during the calibration. A matrix procedure was used to correct the forces for this interaction. Rotary shaft encoders were mounted on the coulter and on the soil bin drive to measure the angular velocity of the coulter and the travel speed of the soil bin. The angular velocity and the travel speed were computed by counting the number of pulse signals from the rotary shaft encoders every 0.2 second. The digital signals from the rotary shaft encoders were connected to counters and the analog signals from the dynamometer, after passing through the signal conditioner, were connected to the A/D converter. The microcomputer programs, written in assembly language, were developed to read signals from the transducers, convert them to actual unit, display them upon request and record them on a sigital tape every 0.2 second.

• Journal of Korean Medical classics
• /
• v.26 no.3
• /
• pp.33-52
• /
• 2013

Objective : Zhang Zhong-jing's Shang-Han-Lun is based on Six-channels system(六經) to classified a disease, but the notion of this seems to be a very various angles. Among them, Ke-qin(柯琴)'s Six-surface theory(六經地面說) is very clearly explained the notion of Six-channels system(六經) and it provide crucial clue to understanding a Shang-Han-Lun Method : I will try to describe the Six-surface theory(六經地面說) through the Ke-qin's Shang-Han-Lun-Yi(傷寒論翼). At the core of this paper, The diaphragm is the most important criterion to understand a Six-channels system(六經), and it is based on the human body to divided into Yin-Yang(陰陽). Result : Ke-qin's Six-surface theory(六經地面說) is connected with Meridian system(經絡), Viscera and Bowels(臟腑), and their functions. It is the concept of comprehensive to including those related were grouped into the surface. Conclusion : Six-surface(六經地面) is far beyond the simple concept of Meridian, and it include organization of pathology concepts carrying up to what happens on the human body caused by disease. We can see that Zhong-jing's(仲景) medical treatment from syndrome differentiation(辨證) is associated with a holism(整體觀).

• Journal of Korea Multimedia Society
• /
• v.12 no.1
• /
• pp.50-57
• /
• 2009

This paper proposes a extraction of feature lines on a polygonal model using local implicit surface fitting technique. To extract feature lines on a polygonal model, the previous technique addressed to compute the curvature and their derivatives at mesh vertices via global implicit surface fitting. It needs a user-specified precision parameter for finding an accurate projection of the mesh vertices onto an approximating implicit surface and requires high-time consumption. But we use a local implicit surface fitting technique to estimate the local differential information near a vertex by means of an approximating surface. Feature vertices are easily detected as zero-crossings, and can then be connected along the direction of principal curvature. Our method, demonstrated on several large polygonal models, produces a good fit which leads to improved visualization.