• Journal of Drive and Control
• /
• v.11 no.4
• /
• pp.61-67
• /
• 2014

When a manual transmission equipped car stops on an incline where the nose of the car is higher than the rear, hill-start control or hill-holder could prevent the vehicle from rolling backward as the car moves forward. The easy-hill assist valve consists of a check valve and a needle type ON/OFF solenoid valve connected in parallel; it is a hydraulic actuator that can maintain brake pressure using an electrical signal from the ECU. As the EHA valve is a safety-related component of the brake system, high reliability as well as superior dynamic performance is required for it to be applied in commercial vehicles. This paper presents the design of the EHA valve as a piece of equipment that can simulate the brake actuation pressure with a pressurizing piston. Following specific test standards, the experimental results validate the implemented functions of the test equipment, proving the test stand to be effective for the performance and endurance of the EHA valve.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.205-208
• /
• 2008

Generally, there are several types in rear suspension. The rear suspension of subframe type consisting of side member and front/rear cross member is widely used in a medium car and full car. In the small car case, the beam of tubular type without independent suspension system is used to reduce manufacturing cost. The optimized rear suspension of subframe type using hydroforming method has been developed in this study. In designing suspension, the driving stability and durability performance should be considered as an important factor. The stability is related to dynamic frequency and durability is connected with stress analysis of structure. We focus on increasing the stiffness of suspension and decreasing the maximum stress relating to durability cycle life. For making use of the merits of hydroforming which is possible to make the bead, tube expansion, and feeding in desiring position, several optimization design techniques such as shape, size, and topology optimization are proposed. This optimization scheme based on the sensitivity can provide distinguished performance improvement in using hydroforming. Through commercial software based on the finite element, the superiority of this design method is demonstrated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.9
• /
• pp.75-81
• /
• 1999

In this paper, the details of electronically controlled CVT is described , which Kia Motor company recently developed in prototype form for hybrid passenger car. This transmission has two input shafts, one for engine and the other for traction motor. The shaft for traction motor is located at rear side which is extended from primary pulley shaft and connected to traction motor through adapter gear box. Adopting two input system, various driving mode is available such as motor alone driving in hybrid vehicle application. As far as electrohydraulic system concerned , this transmission uses two bleed type variable force solenoids for line pressure and ratio control, and one on-off solenoid for clutch control. Another feature for this transmission is that oil pump for transmission is separate from CVT for supplying oil pressure even at vehicle standstill.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.657-658
• /
• 2004

The reactor protection system (RPS) of HANARO is a safety class system. The reactor is tripped by dropping four shut off rods (SOR). The SOR system consists of a SOR, hydraulic pump, hydraulic cylinder, solenoid valves and a power supply unit which has the AC coil contactor as a switching component. The hydraulic pump lifts up the SOR. The SOR drops by loss of the hydraulic pressure in the hydraulic circuit at the occurrence of voltage sags or interruptions. From this experiment, we knew that the magnitude of the voltage sag which impacts on this system is 70V, 500msec. The reactor regulation system (RRS) of HANARO has four CARs which are connected to the driver through a magnetic clutch. The CAR drops by loss of electromagnetic force of the magnetic clutch when the deeper voltage sags to lower than 10V, 500msec.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1768-1771
• /
• 2002

Automatic Transmission System(ATS) was designed to replace the human's manual operation of the gear box. So far, this system operates with the fixed shift pattern information. In this paper, new algorithm considering driver's operation tendency is proposed. Also, to get rid of the uselessly frequent shift of the ATS, the conditions and the status of the vehicle would be included for the evaluation in making a decision of shifting. A field test is done in a car equipped with the computer set connected to Transmission Control Units(TCU) to check the status of the test car, and it shows the excellency of the proposed algorithm.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.14 no.4
• /
• pp.27-33
• /
• 2018

The recent efforts in academia and industry represent a paradigm shift that will extend the IoT from the home environment so that it is interoperable with the Internet of Vehicles (IoV). IoV is a special kind of IoT. It allows to connect between vehicle and things located in infrastructure. Furthermore, IoV enable to create new intelligent services through collaboration with existing various services such as smart city and connected home. In this paper, we develop a service in order to realize IoV. To this end, we design a novel vehicle service platform which could automatical controlling the IoT device according to drivers' voice. To show practical usability of our proposed platform, we develop a prototype service could be call car-to-thing (C2T). We expect that our proposed platform could eventually contribute to realizing IoV.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.24-30
• /
• 2015

최근 자동차, 도로, 교통시스템에서 전파서비스의 활용과 안전하고 편리한 자동차 이용에 대한 관심이 증가하고 있다, 커넥티드 카(Connected Car) 서비스는 이러한 이용자 니즈에 따라 등장하여 급속히 관심이 증가하고 있으며, 급속한 기술개발 및 표준화가 진행되고 있다. 이 논문에서는 이러한 동향의 커넥티드 카 서비스에 대한 개념과 기술구성 및 세계 주요국의 정책동향 및 주요 참여기업의 서비스 개발 동향과 표준화 동향을 제시하였다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.27-31
• /
• 1999

Recently, manufacturing industries, specially connected with car are doing their best to increase productivity and to reduce production time. This paper deals with the machining of profile(core/cavity) of mold die using the commercial CAM system. In this study, the effect of machining condition on precision of die profile is investigated by experimental observation and analysis.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2020.11a
• /
• pp.284-287
• /
• 2020

현재 자율주행은 Stand Alone 으로 차량 자체적인 센서만을 이용해서 자율주행을 하고 있다. 이번 연구로 Stand Alone 하지 않은 서버 제어 방식의 자율주행 차량 개발이 가능해져 자율주행 차량의 센서와 연산장치가 줄어 차량의 가격이 줄어들며 이 시스템의 궁극적 목표인 자율주행 차량의 사고 감소에 큰 도움을 줄 것을 기대한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.224-227
• /
• 2015

Data transmission via the car driver's tethered smart phone may have a volume-dependent billing in case car driver' phone transmits data in real-time to the remote data center. The on-board diagnosis data generated are temporary stored locally to mobile remote diagnosis application on the car driver's phone, and then transmit to the data center later when car driver connects to the Internet. To increase the easiest of using the remote vehicle application without blocking other tasks to be executing on the cloud, node.js stands as a suitable candidate for handling tasks of data storage on the cloud via mobile network. We demonstrate the effectiveness of the proposed architecture by simulating a preliminary case study of an android application responsible of real time analysis by using a vehicle-to- smart phones applications interface approach that considers the smart phones to act as a remote user which passes driver inputs and delivers output from external applications. In this paper, we propose a study on development of Remote Vehicle fault diagnostic system features web server architecture based event loop approach using node.js platform, and wireless communication to handle vehicle diagnostics data to a data center.