• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.583-590
• /
• 2018

Cross eye technique was proposed as an angle deception jamming technique against monopulse radars. Tracking radars use monopulse or conical scan methods for angle estimation of a target. Thus, if we verify deception performance of cross eye technique against a conical scan radar, efficient jamming systems can be developed to disturb both monopulse radars and conical scan radars. In this paper, we propose a mathematical model for a conical scan radar and a cross eye system. Using the proposed model, angular deception performance of the cross eye technique against conical scan radar is analyzed.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.2
• /
• pp.110-119
• /
• 1994

The Robust Controller for scan-loop is designed using LQG/LTR Methodology. The design and analysis of spiral, rosette and conical scan patterns are discussed. The perfermance and robustness of the LQG/LTR controller are analyzed through experiments and cpmpared with those of the P-controller. Especially to improve the scan performance at large look angle, the cage coil output is linearized using a binomial equation. It is demonstrated that the scan-loop system by the LQG/LTR control is very robust to phase uncertainties.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.180-188
• /
• 1999

${\mu}$-synthesis is applied to design a robust controller for a seeker scan loop system which has model uncertainty and is subject to a external disturbance due to abrupt missile maneuver. The issue of modelling a real-valued parametric uncertainty of a physical seeker scan loop system is discussed. The two-degree-of-frame control structure is employed to obtain better performance. It is shown that ${\mu}$-synthesis provides a superior framework for the robust control design of a seeker scan loop system which exhibits robust performance. The proposed robust control system satisfies design requirements, and especially shows good scanning performances for conical and rosette scan patterns despite parametric uncertainty in real system model.

• Progress in Medical Physics
• /
• v.27 no.4
• /
• pp.236-240
• /
• 2016

The purpose of this study is to propose a novel high sensitivity neuro-PET design. The improvement of sensitivity in neuro-PET is important because it can reduce scan time and/or radiation dose. In this study, we proposed a novel PET detector design that combined conical shape detector with cylindrical one to obtain high sensitivity. The sensitivity as a function of the oblique angle and the ratio of the conical to cylindrical portion was estimated to optimize the design of brain PET using Monte Carlo simulation tool, GATE. An axial sensitivity and misplacement rate by penetration of ${\gamma}$ rays were also estimated to evaluate the performance of the proposed PET. The sensitivity was improved by 36% at the center of axial FOV. This value was similar to the calculated value. The misplacement rate of conical shaped PET was about 5% higher than the conventional PET. The results of this study demonstrated the conical detector proposed in this study could provide subsequent improvement in sensitivity which could allow to design high sensitivity PET for brain imaging.

• Tunnel and Underground Space
• /
• v.25 no.6
• /
• pp.496-504
• /
• 2015

Roadheader that excavates ground using pick cutters installed on the cutting head is one of the partial-face machines. A conical cutter among pick cutters is excavation tool decreasing the loss of cutter using tungsten carbide insert at the tip of the cutter and it has been widely used in the roadheaders. In this study, durability performance for three kinds of conical cutters was evaluated in copper mines composed of Manto and conglomerate. After field test, the visual inspection as well as the weight loss measurement of pick cutters was carried out to investigate the damage of pick cutters. In addition, CT scan and SEM were performed to check whether or not crack and apertures in pick cutters. As results, the conical cutter with hardfacing was evaluated as having the best durability performance and it was unable to find cracks in all cutters investigated.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.87-96
• /
• 2012

In this research, we describe recent technologies and system requirements of the passive microwave radiometer used in Earth observation satellites. And we classify types of microwave radiometer system for Earth observation satellites according to observation targets and ways to scan and discuss a design method. Also, requirements of passive radiometer for Earth observation missions in the latest practical examples used and developed are analyzed in this research.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.3
• /
• pp.97-106
• /
• 2015

In this paper, the development of infrared threat surrogate system is described and it can be used to verify the performance of DIRCM system. In this research, threat surrogates are manufactured using same F# and reflective optics used in 1st- and 2nd-Gen. real seeker so that the threat surrogate system can be used to develop code-based jamming techniques. Also the threat surrogate system can analyze the saturation jamming effect for image seeker using FPA detector. The result shows that 1st- and 2nd-generation threat surrogates have relatively precise tracking performance and jamming effect.

• Current Industrial and Technological Trends in Aerospace
• /
• v.7 no.1
• /
• pp.113-118
• /
• 2009

In this paper, we described the model of noise, target for tracking radar and range tracking, angle tracking, and Doppler frequency tracking for target acquisition and tracking. Target signal as well as the noise signal is modeled as random process varying with elapsed time. This paper addresses three areas of radar target tracking: range tracking, angle tracking, and Doppler frequency tracking. In general, range tracking is prerequisite to and inherent in both angle and Doppler frequency tracking systems. First, we introduced the several range tracking and described techniques for achieving range tracking. Second, we described the radar angle tracking techniques including conical scan, sequential lobing, and monopulse. Finally, we presented concepts and techniques for Doppler frequency tracking for several radar types.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.107.2-107.2
• /
• 2014

다양한 산업분야에서의 급격한 Packing Density 증가 추세로 인하여 영상분석기기 분야도 기술적으로 매우 진보되어왔다. 특히 전자현미경(SEM : Scanning Electron Microscope)은 반도체, 디스플레이 및 부품 소재의 고집적화와 더불어 기술의 발전 속도가 빠르게 이루어지고 있으며, 매우 고도화 되고 있다. 이에 따른 다양한 응용분야에서 전자현미경의 수요도 꾸준히 증가되고 있는 추세이다. 그러나 기초 과학기술을 기반으로 하는 전자현미경 산업분야는 높아진 국내 수요대비 자체 기술 발전이 미약한 실정이다. 이러한 현실속에서 국내 기술력으로 FE-SEM을 개발하였고 상용화를 눈앞에 두고 있다. 국산화된 FE-SEM은 Outer Lens방식으로 Schottky cathode와 60o conical Lens를 적용하여 고분해능을 구현함과 동시에 Scan generator, Auto-stepping및 Retarding 기능들도 추가 장착하여 제품경쟁력을 극대화 하고자 하였다. 본 발표는 개발된 FE-SEM의 기술적 특징과 개발 과정 및 결과를 소개하고자 하였다. 또한 해외 경쟁사들의 선행 기술동향 대비 현재 국내 기술 수준을 비교하여 향후 나아갈 방향을 고찰하고자 하였으며, 이를 기반으로 진행 중에 있는 초 저-가속전압 및 Semi In-Lens Optic구현을 위한 국내 기술개발 추진 현황도 간략하게 논하고자 한다. 이러한 고찰을 통하여 해외 선진 경쟁사 대비 후 발업체로써 낙후되어있는 국내기술의 격차를 빠르게 좁혀 나아가고 Global 경쟁력을 갖춘 제품을 구현하기 위하여 국내 전문가들과의 협력을 통한 선행 요소기술 및 차별화된 제품기술 확보 방법을 강구하고자 한다.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.2
• /
• pp.190-205
• /
• 2015

In this paper, the impact damage behavior of USN-150B carbon/epoxy composite laminates subjected to high velocity impact was studied experimentally and numerically. Square composite laminates stacked with $[45/0/-45/90]_{ns}$ quasi-symmetric and $[0/90]_{ns}$ cross-ply stacking sequences and a conical shape projectile with steel core, copper skin and lead filler were considered. First high-velocity impact tests were conducted under various test conditions. Three tests were repeated under the same impact condition. Projectile velocity before and after penetration were measured by infrared ray sensors and magnetic sensors. High-speed camera shots and C-Scan images were also taken to measure the projectile velocities and to obtain the information on the damage shapes of the projectile and the laminate specimens. Next, the numerical simulation was performed using explicit finite element code LS-DYNA. Both the projectile and the composite laminate were modeled using three-dimensional solid elements. Residual velocity history of the impact projectile and the failure shape and extents of the laminates were predicted and systematically examined. The results of this study can provide the understanding on the penetration process of laminated composites during ballistic impact, as well as the damage amount and modes. These were thought to be utilized to predict the decrease of mechanical properties and also to help mitigate impact damage of composite structures.