• 소성∙가공
• /
• 제11권6호
• /
• pp.495-502
• /
• 2002

The welding pressure in extru bending process is affected by the shape of welding chamber of porthole die. It is very important to increase the welding pressure when the tube should be extruded particulary from four billets of the materials. The high circumferential stress of the tube can make the welding pressure increase during the extru-bending. In order to increase the circumferential stress, it is necessary to make the billets pass through the narrow gap between the conical die and the conical plug. This paper describes the welding pressure by the experiments and the analysis with the two types of the chamber. One of them is the chamber between the flat die and straight mandrel, and the other one is the chamber between the conical die and conical plug. The results of the experiments and the analysis shows that the conical chamber makes the welding pressure increase by the effect of the reducing diameter of tube and the welding pressure by the conical dic and plug is stronger than the welding pressure by the flat die and straight mandrel.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2002년도 제5회 압출 및 인발가공 심포지엄
• /
• pp.63-70
• /
• 2002

The purpose of the present study is to propose a new way of manufacturing curved metal tubes with arbitrary sections and way of eliminating the conventional bending defects such as thinning and thickening, in the wall of tube, distortion of the section, and wrinkling and folding on the surface by the extrusion bending process that can extrude and weld together one or more billets inside dies cavity, and can bend them during extrusion due to the gradient of extrusion velocities controlled by the eccentricity of the cavity sections between the entrance and the exit of the eccentric conical extrusion bending dies and conical plug, or by the relative size of the holes of multi-hole container, or by the relative moving velocity of multi-punches.

• Journal of Chest Surgery
• /
• 제18권4호
• /
• pp.542-548
• /
• 1985

In 1966 Porstmann was the first to successfully apply a new method by which a PDA was closed by a Plug transported by catheters through the femoral artery. We Successfully closed the isolated PDA in 6 consecutive patients using the transfemoral catheter method. To Perform this technique more safely and reliably, some instrumental and technical improvements was made. The Indications for this method have been Expanded to include the cylindrical or window Type ductus as well as the conical-shaped ductus. Classification into three Groups of the configuration of the by Angiography has been useful in selecting the shape of the closing plug. Whenever feasible, we consider the catheter technique to be the method of choice to close the ductus.

• 한국추진공학회지
• /
• 제23권3호
• /
• pp.28-34
• /
• 2019

공압시험용 플러그 노즐 구동에 따른 추력제어, 핀틀 형상 및 작동압력에 따른 유동특성 분석을 수행하였다. 이를 위해 시험에서의 유동구조와 추력계수를 비교함으로써 수치해석의 타당성을 확인하였다. 이후 각 노즐형상이 설계의도지점에 노즐목이 형성됨과 원뿔형 노즐에 대하여 핀틀 구동만으로 1:8의 추력제어가 가능함을 확인하였다. 마지막으로 고도보정 효과가 뛰어난 에어로 스파이크 노즐일지라도, 너무 낮은 NPR에 맞춰 설계된 경우, 부족팽창 조건에서 불리할 가능성을 확인하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 춘계학술대회 논문집
• /
• pp.102-105
• /
• 2001

The bending process for the curved tube can be developed by the hot metal extrusion machine with the multiple punches moving in the different velocity. The bending phenomenon has been studied to be occurred by the different of velocity at the die extrusion. The difference of velocity at the die exit section can be obtained by the different velocity of billets through the multi-hole container and by the welding of billets inside the porthole die chamber. The multiple billets are moving differently by the multiple extrusion punches controlled by PLC with the servo mechanism units. The results of the experiments show that the curved tube can be bended by the extrusion process and that the defects such as the distortion of section and the thickness change of thick tube, tile folding and wrinkling of thin tube can not be shown after the bending processing by the extrusion bending machine.