• Journal of the Korean Burn Society
• /
• v.21 no.1
• /
• pp.17-21
• /
• 2018

Purpose: This study aimed to evaluate the thermal protective function of firefighter clothes and gloves through real scale fire simulations. Methods: Firstly, the fire simulation by real scale flame was performed for firefighter clothes. A manikin equipped with firefighter clothes was directly exposed to flames which energy average is 84 Kw/m². for 22 seconds. Heat flux gauges attached on the body measured surface temperature elevation. Secondly, we also performed the other fire simulation by hot plate exposure to firefighter gloves. Firefighter gloves with heat flux gauges exposed hot plate which temperature is 300℃ in both dry and moist conditions. Primary outcome was surface temperature change of manikin body (first simulation) and hand (second simulation) over times. Results: In the first flame simulation, the surface temperature of face and shoulders elevated more rapidly comparing with the other body surface area when initial period of flame shutter open. After 18sec of shutter open, the surface temperature of upper trunk elevated rapildy. After shutter closure, high surface temperature kept continuously on right side of face and left shoulder. In the second hot plate simulation, fingers and palms showed higher surface temperature than the other areas of hands in the both dry and wet conditions. Conclusion: This study suggests that the real scale flame enables firefighter clothes to lose their heat protective function suddenly after 18 seconds. Additionally, the protective function of firefighter gloves were relatively weaker in the palmar side of fingers than the other parts of hand. There should be additional study for evaluate thermal protection performance of firefighter clothes. And, further effort for reinforce palmar side of fingers of firefighter gloves should be done.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.11 no.4
• /
• pp.381-390
• /
• 2023

In this study, the mechanical performance of concrete exposed to chloride ion penetration was investigated. And a compressive stress-strain model was presented. CaCl₂ solution was added when mixing concrete to simulate long-term chloride ion penetration, and the concentration of chlorine ions was set to 0, 1, 2, and 4 % based on the weight of the binder. To investigate the compressive stress-strain curve after the peak stress of concrete, the compressive strength was measured by displacement control. When the chlorine ion concentration was 1 %, peak stress increased, but when the chlorine ion concentration was 2 % or more, peak stress decreased. In the case of peak strain, no trend according to chloride ion concentration was observed at 7 days. At 28 days, peak strain decreased as the chloride ion concentration increased. A compressive stress-strain curve model based on the Popovics model was presented using changes in peak stress and peak strain at 28 days. Microstructure analyses were performed to investigate the cause of the decrease in mechanical performance as the concentration of chlorine ions increased. It was confirmed that as the concentration of chlorine ion increased, Friedel's salt increased and portlandite decreased.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.3
• /
• pp.1-15
• /
• 2023

This study focuses on modeling the impact of ammonia leakage from the storage tank in a combined cycle power plant's flue gas denitrification facility. It employs accident impact assessments and diffusion models to determine the optimal scenarios for ammonia storage tank leakage accidents. The study considers the operating conditions of variables as standard conditions for predicting the extent of damage. The Taean combined cycle power plant is chosen as the target area, taking into account seasonal factors such as temperature, humidity, wind speed, atmospheric stability, and wind direction. By utilizing a Gaussian diffusion model, the concentration of ammonia gas at various locations is estimated to assess the potential extent of external damage resulting from a leak. The study reveals that in conditions of high temperature and stable atmosphere within the specified range, lower wind speeds contribute to increased damage to the human body due to ammonia diffusion.

• Korean Journal of Culture and Social Issue
• /
• v.9 no.2
• /
• pp.61-78
• /
• 2003

The researcher examined the relationship between dating violence and drinking behaviors. Study participants included 440 Korean College students(184 males and 256 females) currently involved in heterosexual dating relationships. Participants' ages ranged from 17 to 30(M=20.08, SD=1.89). Questionnaires and psychological tests used included: Straus' Conflict Tactics Scale, Alcohol Use Disorder Identification Test(AUDIT), Cooper's Revised Drinking Motives Questionnaire(DMQ), and Index of Family Alcohol Use. Research designs were 2(gender) × 2(experience of inflicting dating violence), i.e. 2-way MANOVAs. Results suggest students who drink one or more times a week are more likely to commit acts of violence toward their dating partners than students drinking less often. The study revealed males tend to drink with higher social, enhancement, conformity and coping motives than females. The study also showed that students inflicting dating violence drank with higher coping motives than students who did not. Males showed more hazardous, dependent and harmful drinking patterns than females. Also, students who had inflicted dating violence showed a higher degree of these characteristics (hazardous, dependent and harmful drinking patterns) along with a greater family history of alcohol use than participants who had not inflicted dating violence. The findings showed significant 2-way interactions in dependent and harmful drinking patterns. Simple main effect analysis revealed that differences in dependent and harmful drinking patterns in males are more significant than the same differences in females.

• Information Systems Review
• /
• v.21 no.3
• /
• pp.63-86
• /
• 2019

As the use of ICT became a part of daily social life, online community has emerged as a new type of social organization. Online community is a virtual space which enables many people to participate and contribute together to collective knowledge. Anonymity in online communities can encourage active social participation by people with various social constraints, however, anonymity can also lead to serious social pathology. As a result, it is necessary to study on what is fundamentally influencing human behavior and how people's behavior is controlled in anonymous online community. This study focuses on human identity and investigate the factors affecting human behavior control in anonymous online environment by examining various aspects of identity in online discussion community. This study empirically verifies the causal relationship between factors, including social & technical anonymities, various identity dimensions, intrinsic motivation to participate in the community, group norm conformity, and quality of discussion. It also analyzes the difference between groups by the level of anonymity, gender, age, community usage period, and discussion topic. Based on the findings, this research provides theoretical and practical implications for online community management strategies and a better culture on Internet discussion.

• Journal of Radiation Industry
• /
• v.17 no.1
• /
• pp.33-44
• /
• 2023

The deep geological repository of high-level radioactive waste shall be designed to meet the safety objective set in the form of radiation dose or corresponding risk to protect human and the environment from radiation exposure. Engineering feasibility and conformity with the safety objective of the facility conceptual design can be demonstrated by comparing the assessment result using the computational model for scenario(s) describing the radionuclide release and transport from repository to biosphere system. In this study, as the preliminary study for developing the high-level radioactive waste disposal facility in Korea, we reviewed and analyzed the entire list of FEPs and how to handle each FEP from a general point of view, which are selected for the geosphere region in the radiological safety assessment performed for the license application of the KBS-3 type deep geological repository in Finland and Sweden. In Finland, five FEPs (i.e., stress redistribution, creep, stress redistribution, erosion and sedimentation in fractures, methane hydrate formation, and salt exclusion) were excluded or ignored in the radionuclide release and transport assessment. And, in Sweden, six FEPs (i.e., creep, surface weathering and erosion, erosion/sedimentation in fractures, methane hydrate formation, radiation effects (rock and grout), and earth current) were not considered for all time frames and earthquake out of a total of 25 FEPs for the geosphere. Based on these results, an FEP list (draft) for the geosphere was derived, and the relative importance of each item was evaluated for conducting the radiological safety assessment of the domestic deep geological disposal facility. Since most of information on the disposal facility in Korea has not been determined as of now, it is judged that all FEP items presented in Table 3 should be considered for the radiological safety assessment, and the relative importance derived from this study can be used in determining whether to apply each item in the future.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.2
• /
• pp.171-178
• /
• 2016

Purpose : In order to minimize the dose of femoral head as an appropriate treatment plan for rectal cancer radiation therapy, we compare and evaluate the usefulness of 3-field 3D conformal radiation therapy(below 3fCRT), which is a universal treatment method, and 5-field 3D conformal radiation therapy(below 5fCRT), and Volumetric Modulated Arc Therapy (VMAT). Materials and Methods : The 10 cases of rectal cancer that treated with 21EX were enrolled. Those cases were planned by Eclipse(Ver. 10.0.42, Varian, USA), PRO3(Progressive Resolution Optimizer 10.0.28) and AAA(Anisotropic Analytic Algorithm Ver. 10.0.28). 3fCRT and 5fCRT plan has $0^{\circ}$, $270^{\circ}$, $90^{\circ}$ and $0^{\circ}$, $95^{\circ}$, $45^{\circ}$, $315^{\circ}$, $265^{\circ}$ gantry angle, respectively. VMAT plan parameters consisted of 15MV coplanar $360^{\circ}$ 1 arac. Treatment prescription was employed delivering 54Gy to recum in 30 fractions. To minimize the dose difference that shows up randomly on optimizing, VMAT plans were optimized and calculated twice, and normalized to the target V100%=95%. The indexes of evaluation are D of Both femoral head and aceta fossa, total MU, H.I.(Homogeneity index) and C.I.(Conformity index) of the PTV. All VMAT plans were verified by gamma test with portal dosimetry using EPID. Results : D of Rt. femoral head was 53.08 Gy, 50.27 Gy, and 30.92 Gy, respectively, in the order of 3fCRT, 5fCRT, and VMAT treatment plan. Likewise, Lt. Femoral head showed average 53.68 Gy, 51.01 Gy and 29.23 Gy in the same order. D of Rt. aceta fossa was 54.86 Gy, 52.40 Gy, 30.37 Gy, respectively, in the order of 3fCRT, 5fCRT, and VMAT treatment plan. Likewise, Lt. Femoral head showed average 53.68 Gy, 51.01 Gy and 29.23 Gy in the same order. The maximum dose of both femoral head and aceta fossa was higher in the order of 3fCRT, 5fCRT, and VMAT treatment plan. C.I. showed the lowest VMAT treatment plan with an average of 1.64, 1.48, and 0.99 in the order of 3fCRT, 5fCRT, and VMAT treatment plan. There was no significant difference on H.I. of the PTV among three plans. Total MU showed that the VMAT treatment plan used 124.4MU and 299MU more than the 3fCRT and 5fCRT treatment plan, respectively. IMRT verification gamma test results for the VMAT plan passed over 90.0% at 2mm/2%. Conclusion : In rectal cancer treatment, the VMAT plan was shown to be advantageous in most of the evaluation indexes compared to the 3D plan, and the dose of the femoral head was greatly reduced. However, because of practical limitations there may be a case where it is difficult to select a VMAT treatment plan. 5fCRT has the advantage of reducing the dose of the femoral head as compared to the existing 3fCRT, without regard to additional problems. Therefore, not only would it extend survival time but the quality of life in general, if hospitals improved radiation therapy efficiency by selecting the treatment plan in accordance with the hospital's situation.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.8
• /
• pp.997-1011
• /
• 2017

This study aimed to evaluate the applicability of "food and nutrition standards for child care setting in the Seoul Metropolitan Government" using quantitative and qualitative surveys and lay the groundwork for future expansion. To evaluate the understanding and applicability of each item of the standards and utilize goodness of fit as an evaluation item to improve practicality of the child care center's health foodservice, we surveyed 82 child care centers, kindergartens, and community children centers in Seoul by e-mail through the Seoul Metropolitan Government in November 2015. Using focus group interviews with directors of child care centers and kindergartens as well as dieticians of child care support centers who had conducted public foodservice in Seoul, the appropriateness of each standard was finally reviewed, and amendments to extend this standard were derived. Results of the survey show an understanding of 86.9% and an applicability of 80.7%. Moreover, the applicability of the evaluation items for assessing improvement of health foodservice practices at the child care center was 82.6%. Qualitative evaluation of the applicability of standards through focus group interviews identified four factors for extended application: necessity of a guideline for separate food ingredient suppliers, conformity of the basis and purpose of the item, consideration of contextual situations, and necessity of establishing a Seoul-level foundation. Therefore, guidelines for the standards should be suggested for those providing public food services for children. Furthermore, separate guidelines categorized by items that food ingredient suppliers need to provide should be mandatory or recommended. Evaluation of the applicability of the standards suggests that revising and supplementing the guidelines in order to extend the standards can contribute to health promotion and a sustainable environment for children using public foodservice. Follow-up studies and supports are needed for sustainable food and nutrition management programs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.37 no.2
• /
• pp.26-35
• /
• 2009

This study is an analysis of the design changes of children's play facilities and the related rules and regulations which causes these changes. Accordingly, it is noticed that a site's change of design by legislation and by yearly alternation influences playground design. First, after revising the provisions for the distance from roads and parking lots, the constructing of safety fences between play facilities and the using of durable materials, alterations of the designs have been made a reality. Second, the design changes after the period of regulation transitions were caused by provisions related to the shelter of evergreens and conditions of the sun. Third, the changes of the playgrounds were related to the substitution of exercise facilities for the local residents and in carrying out a hygiene exam more than twice a year. Because a lack of regulatory standards for the design of playgrounds resulted in compliance based on individual interpretation and because a substitution of exercise facilities is part of the way to alleviate these regulations, the conditions of the site under investigation could be projeced. By such changes of regulations and analysis of alterations of playground design, programs for improvement were suggested. It turned out that the composition of the concrete standard in conformity with regulations required closer observance. Moreover, design standards for children's playgrounds are needed, such as the provision of variation in external appearance, the creation of more flexible layouts and the outlining of spaces by themes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.10
• /
• pp.578-589
• /
• 2018

Building Integrated Photovoltaic (BIPV) system is a typical integrated system that simultaneously performs both building function and solar power generation function. To maximize its potential advantage, however, the solar photovoltaic power generation function must be integrated from the early conceptual design stage, and maximum power generation must be designed. To cope with such requirements, preliminary research on BIPV design process based on architectural design model and computer simulation results for improving solar power generation performance have been published. However, the requirements of the BIPV system have not been clearly identified and systematically reflected in the subsequent design. Moreover, no model has verified the power generation design. To solve these problems, we systematically model the requirements of BIPV system and study power generation design based on the system requirements model. Through the study, we consistently use the standard system modeling language, SysML. Specifically, stakeholder requirements were first identified from stakeholders and related BIPV standards. Then, based on the domain model, the design requirements of the BIPV system were derived at the system level, and the functional and physical architectures of the target system were created based on the system requirements. Finally, the power generation performance of the BIPV system was evaluated through a simulated SysML model (Parametric diagram). If the SysML system model developed herein can be reinforced by reflecting the conditions resulting from building design, it will open an opportunity to study and optimize the power generation in the BIPV system in an integrated fashion.