• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.391-399
• /
• 2021

The conformal array sensor has different sub-array depending on different beam steering directions. According to the method to effective the sensor, the performance of the conformal array sensor can be different, where the sub-array selects an effective sensor. Also, due to the figure of the conformal array sensor, the figure of the sub-array can be different each other, which results in different performance on directivity index, beam width and etc. In this paper, two methods to select sub-array which is the criteria for each sensors position vector and directive vector were proposed. For two sub-array selection methods, the performance of the directivity index, horizontal and vertical beam width were compared with the average and variance. In addition, this comparison was conducted when the number of sensors was fixed. When the number of sensors was not fixed, the directional vector method mainly results in high performance, but the performance of vertical beam width was lower or equal. When the number of sensors was fixed, the performance of two methods is similar, but the performance of variance was deteriorated.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2010.10a
• /
• pp.340-341
• /
• 2010

Noise reduction is an important factor to design low noise sensor array. In this paper three layers of the de-coupler in the conformal sensor array were used to investigate noise reduction. Conformal sensor array is positioned in the layers and the distance from the layer is 0.25cm~1.5cm. Transfer function in the frequency density function is investigated according to the three different positions. When increasing the embedded distance the flow noise decreased in the region of the kx>10.

• 대한공업교육학회지
• /
• v.33 no.2
• /
• pp.273-286
• /
• 2008

Underwater acoustic sensor array can detect acoustic signal in underwater and the sensor array can be mounted in each left, right or front side of the UUV(Unmanned Underwater Vehicle). The sensor array could be conformal array and effected turbulent boundary layer flow noise. Therefore, in this paper numerical simulations were performed to know the how the outer flow noise affect the hydrophone which embedded in the elastomer. Corcos wall pressure model was used as turbulent boundary layer flow noise and this model was applied to the frequency density function. Characteristics of transfer function according the kx wave number were simulated and design parameters were thickness of elastomer, density, and modulus of elasticity. Based on the simulation results when increasing the thickness of elastomer noise reduction was increased. This results can be applied to the design of conformal array of UUV.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.44-57
• /
• 2001

This paper analyses the performance of FFTSA (Fast Fourier Transform Synthetic Aperture) in the effects of temporal coherence and oscillatory towed course, which is one of the techniques for passive synthetic aperture SONAR process using linearly distributed towed array. Also this paper proposes the FFTSA technique using towed array having conformal shape to alleviate the performance degradation for estimating the incident angle under inconsistent under water environments. And this paper analyses the performance of the proposed FFTSA technique making use of conformal structure throughout exhaustive computer simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.5
• /
• pp.416-423
• /
• 2016

In this paper, a conformal type $1{\times}4$ microstrip patch array antenna with tilted antenna beam is presented for UWB sensor applications. Each antenna element comprises E-shaped patch with L-probe feeding to increase the bandwidth. The tilted antenna beam of 20 degree can be achieved with 42 ps microstrip delay lines at the series feeding network with T-junctions. The measured reflection coefficient is >9 dB at 3.5~4.5 GHz. The measured antenna gain and HPBW are >10 dBi and <30 degree at 3.75~4.25 GHz.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.04a
• /
• pp.673-674
• /
• 2011

• 대한공업교육학회지
• /
• v.34 no.1
• /
• pp.238-251
• /
• 2009

The noise itself that affects the sensor array is defined as the noise which happens in the place where the system is installed and the circumference noise which comes from the ocean. The array structure for detecting acoustic signal in the underwater effected turbulent layer flow noise. In this paper to design the conformal array spectral density function was introduced and several cases of flow induced noise which affect transfer function were simulated. Modified Corcos wall pressure model was used as turbulent boundary layer flow noise. The effect of noise has been reduced as integrated sum of transfer function has been reduced by decreasing elastomer thickness and density when kx is in low wave number area. Also the characteristics of transfer function by Corcos wall pressure displayed the product of frequency density function. This simulation results can be applied to the conformal array design in unmmaned underwater vehicle in the near future.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.10
• /
• pp.987-995
• /
• 2009

As an experimental technique to analyze the far-field characteristics of underwater cylindrical array sensors, cylindrical acoustic holography is studied. Inside an laboratory water tank, far-field directivity patterns as well as near-field source images are reconstructed from the measured hologram by hydrophone array. Approximate equation for far-field directivity estimation is derived based on stationary phase method. The simulation and experiment show well usefulness of the proposed method in application of underwater array sensors.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.111-116
• /
• 2009

As an experimental technique to analyze the far-field characteristics of underwater cylindrical array sensors, cylindrical acoustic holography is studied. Inside an laboratory water tank, far-field directivity patterns as well as near-field source images are reconstructed from the measured hologram by hydrophone array. Approximate equation for far-field directivity estimation is derived based on stationary phase method. The simulation and experiment show well usefulness of the proposed method in application of underwater array sensors.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.41-47
• /
• 2018

Underwater acoustic sensors are mounted on unmanned underwater vehicles(UUV) and detect and process the underwater information. These underwater acoustic sensor designs are very important subject for understanding and applying engineering. Therefore, in this paper, it was designed and fabricated the acoustic sensors step by step, evaluated their performance, and then studied the suitability of such a series of design procedures and steps to apply them to the integrated design learning. The results of the questionnaire survey showed that the steps and methods of the proposed sensor design are suitable for the contents of the integrated design project, and they are easy to acquire the technology and are very interesting design topics. It is anticipated that when the design project is applied to the integrated design in the future, high educational achievement will be achieved.