• 제목/요약/키워드: Confining stress

검색결과 337건 처리시간 0.022초

준설토를 이용한 경량기포혼합토의 역학적 특성 연구 (Mechanical Characteristics of Light-weighted Foam Soil Consisting of Dredged Soils)

  • 김주철;이종규
    • 한국지반공학회논문집
    • /
    • 제18권4호
    • /
    • pp.309-317
    • /
    • 2002
  • 본 논문은 경량기포혼합토(LWFS)의 역학적 특성에 대하여 연구하였다. 경량기포혼합토는 단위중량의 감소와 압축 강도의 증가를 위하여 연안준설토, 고화제 및 기포를 혼합하여 제작되었다. 초기함수비, 고화제 함유율, 양생조건 및 구속압 등 다양한 조건으로 경량기포혼합토를 제작하여 일축 및 삼축압축시험을 실시하였다. 경량기포혼합토의 실험결과는 동일한 단위중량일 경우 응력-변형 거동과 압축강도는 준설토의 초기함수비보다 고화제 함유율에 더 영향을 받는 것으로 나타났다. 한편 삼축압축시험에서 응력-변형 관계는 양생조건에 관계없이 변형-연화거동을 나타내었다. 구속압에 따른 응력-변형 거동은 경량기포혼합토의 일축압축강도와 근접한 구속압을 경계로 다르게 변화하는 것으로 나타났다. 압축강도 200kPa 이상으로 지반개량을 하기 위해 요구되는 경량기포혼합토의 배합비는 준설토의 초기함수비 100%~160%와 고화제 함유율 6.6%로 나타났다.

삼축압축시험을 통한 응력이력에 따른 전단거동의 변화 (Effect of the stress history on the shear behavior using a Triaxial compression test)

  • 김승한;최성근;이문주;이우진
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.888-895
    • /
    • 2006
  • In this study, anisotropically consolidated undrained shear(CAU) test was performed to examine the variation of the shear strength according to the stress history. The specimen having 30% relative density was homogeniously prepared, and 200KPa of back pressure was applied to increase the B value more than 0.95. To make NC specimens, the vertical stress was applied on the specimen by 100KPa, 200KPa and 400KPa, and to make OC specimens, the vertical stress was applied upto 400KPa and was reduced to 200KPa and 100KPa resulting in OCR 2 and 4 respectively. The test result indicates the shear strength for the OC specimens are slightly higher then that of the NC specimens at the same confining pressure. The elastic modulus varies according to the confining stress and considerably affected by preconsolidation stress.

  • PDF

실트질 모래가 충진된 지오튜브 구조체의 저 등방조건에서 삼축압축시험에 의한 응력-변위 거동 연구 (A Study on Stress-Strain Behaviour of Geotube Structure Filled with Silty Sand Under Low Confining Pressure by Triaxial Compression Test)

  • 김형주;박태웅;김기홍
    • 한국지반신소재학회논문집
    • /
    • 제21권4호
    • /
    • pp.69-78
    • /
    • 2022
  • 지오튜브 공법은 해안지역 해안선 침식방지와 준설토 매립 호안사면의 뒤채움 필터석 대체용으로도 널리 활용되고 있다. 본 연구는 지오텍스타일에 의해 보강되어 제작된 공시체를 현장 상태를 고려하여 등방 구속압력 10kPa, 50kPa, 100kPa 이하로 최소화하여 연직응력 재하 시 변형 거동을 파악하였다. 시험결과 공시체의 연직 변형율 7%까지는 구속압(≤100kPa)에 관계없이 지오텍스타일 조직의 이완에 따른 인장력이 발휘되는 초기 Strain Hardening 영향으로 응력-변위 거동은 동일하였다. 변형율 7%이상부터는 구속압력이 작은 공시체는 재하 시 변형이 커서 보강 지오텍스타일의 인장 저항력을 증가시키므로 Strain Hardening에 의해 파괴 시 축차응력은 상대적으로 증가하였다. 파괴 후는 급격하게 Strain Softening에 의해 취성파괴형태를 나타내면서 저하되었다. 이는 일반적인 삼축압축시험에서 셀 압이 증가되면서 전단응력도 크게 증가되는 현상과 다르다. 지오텍스타일 등방구속시험에서는 지오텍스타일의 인장변위가 일차적으로 영향을 받기 때문에 탄성계수를 급격하게 증가시키는 탄성 거동을 나타내고 있다.

포화(飽和)모래의 전단강도특성(剪斷强度特性)에 관(關)한 실험적(實驗的) 연구(研究) -대구지역(大邱地域) 낙동강(洛東江) 모래에 대해- (Experimental Study on the Shear Strength Characteristics of the Saturated Sand)

  • 김영수;서인식;김병탁
    • 대한토목학회논문집
    • /
    • 제14권6호
    • /
    • pp.1417-1431
    • /
    • 1994
  • 본 연구에서 삼축압축시험기를 이용하여 낙동강유역 모래에 대한 상대밀도, 전단변형어속도, 구속압력의 변화에 의한 전단강도 특성을 고찰하였다. 그리고 Lade 모델과 수정 Lade 모델의 결과는 실험에 의하여 비교하였다. 전단변형제어속도, 상대밀도 그리고 구속압력변화에 의한 결과를 요약하면 다음과 같다. 1) 낙동강유역의 모래에 대해 Coulomb의 식을 이용할 수 있는 응력의 한계는 변형제어속도가 0.08%/min일 때 120~200 kpa이고 0.5%/min일 때 120~150 kpa의 범위로 고찰되었다. 이들 한계범위들은 석회질 모래나 양입도의 석영질 모래에 비해 적게 나타났다. 2) 변형제어속도와 상대밀도 모두가 Lade 모델과 수정 Lade 모델에 필요한 매개변수에 많은 영향을 미친다. 따라서 현장에서는 하중조건과 지반조건을 정확히 파악하여 적절한 매개변수를 사용하는 것이 중요하다. 3) 변형제어속도와 상대밀도의 변화에 따른 구성모델식에 의한 파괴시 주응력비는 전반적으로 변형제어속도에는 큰 영향을 받지 않으나, 상대밀도와 구속압력이 구성 모델식의 결과에 영향을 미치는 것으로 나타났다. 따라서 낙동강유역의 모래에 대한 응력-변형거동의 정확한 예측을 위해서는 다양한 조건에 대한 연구가 필요할 것으로 판단된다. 4) Lade 모델과 수정 Lade 모델에서 결정된 파괴시 주응력비와 파괴포락선의 내부마찰각을 실측치와 비교한 결과, 본 연구에서 사용된 구속응력 범위내에서는 Lade 모델이 수정 Lade 모델보다 평균적으로 실측치에 더 근접함을 보여 주었다.

  • PDF

고온 및 저온하에서의 암석의 변형, 파괴 특성 (Failure and Deformation Characteristics of Rock at High and Low Temperatures)

  • 정재훈;김영근;이형원;이희근
    • 터널과지하공간
    • /
    • 제2권2호
    • /
    • pp.224-236
    • /
    • 1992
  • It is very important to determine the thermo-mechanical characteristics of the rock mass surrounding the repository of radioctive waste and the LPG storage cavern. In this study, Hwasoon-Shist. Dado-Tuff adn Chunan-Tonalite were the selected rock types. Temperature dependence of the mechanical properteis such as uniaxial compressive strength, tensile strength, Young's modulus was investigated by measuring the behaviour of these properties due to the variation of temperature. Also, the characteristics of strength and deformation of these rocks were examined through high-temperature triaxial compression tests with varing temperatures and confining pressures. Important results obtained are as follows: In high temperature tests, the uniaxial compressive strength and Yong's modulus of Tonalite showed a sligth increase at a temperature up to 300$^{\circ}C$ and a sharp decrease beyond 300$^{\circ}C$, and the tensile strength showed a linear decrease with increasing heating-temperature. In high-temperature triaxial compression test, both the failure stress and Young's modulus of Tonalite increased with the increase of confining pressure at constant heating-temperature, and the failure stress decreased at 100$^{\circ}C$ but increased at 200$^{\circ}C$ under a constant confining pressure. In low temperature tests, the uniaxial compressive and tensile strengths and Young's modulus of these rocks increased as the cooling-temperature is reduced. Also, the uniaxial compressive and tensile strengths of wet rock specimens are less than those of dry rock specimens.

  • PDF

섬유혼합 보강토의 전단특성 (Shearing Properties of Fiber-Reinforced Soil)

  • 조삼덕;김진만
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1993년도 가을 학술발표회 논문집
    • /
    • pp.23-28
    • /
    • 1993
  • Shearing properties of soil reinforced with discrete randomly oriented inclusions depend on soil density, particle size, grading, fiber length, tensile strength and stiffness of fiber, mixing ration of fiber, confining stress, etc.. In this paper the effects of those various factors on shear strength of the fiber-reinforced soil was evaluated through triaxial tests and uniaxial tests. Tests were performed on two sandy soils and one silty soil with inclusions in varing lengths, contents and tensile strengths and tested at different confining stresses in triaxial test. From the experimental results, it was investigated if there is an optimal range of fiber lengths and fiber contents for the tested soils.

  • PDF

Shear wave velocity of sands subject to large strain triaxial loading

  • Teachavorasinskun, Supot;Pongvithayapanu, Pulpong
    • Geomechanics and Engineering
    • /
    • 제11권5호
    • /
    • pp.713-723
    • /
    • 2016
  • Shear wave velocities of three selected sandy soils subject to drained triaxial compression test were continuously measured using the bender elements. The shear wave velocity during isotropic compression, as widely recognized, increased as confining pressure increased and they were correlated well. However, during drained shearing, the mean effective stress could no further provide a suitable correlation. The shear wave velocity during this stage was almost constant with respect to the mean effective stress. The vertical stress was found to be more favorable at this stage (since confining stress was kept constant). When sample was attained its peak stress, the shear wave velocity reduced and deviated from the previously existed trend line. This was probably caused by the non-uniformity induced by the formation of shear band. Subsequently, void ratios computed based on external measurements could not provide reasonable fitting to the initial stage of post-peak shear wave velocity. At very large strain levels after shear band formation, the digital images revealed that sample may internally re-arrange itself to be in a more uniform loose stage. This final stage void ratio estimated based on the proposed correlation derived during pre-peak state was close to the value of the maximum void ratio.

유리섬유쉬트로 보강된 콘크리트 기둥의 유한요소해석 (Finite Element Analysis of Concrete Columns Strengthened with Glass Fiber Sheets)

  • 정택원;송하원;변근주
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.449-454
    • /
    • 2002
  • For finite analysis of concrete columns strengthened with glass fiber sheets, an effective concrete model which considers the confining effects by lateral reinforcement and glass fiber sheets is necessary. In this paper, the so-called elasto-plasticity and continuum fracture model (EPF model) is modified to consider high confining effects of strengthened reinforced concrete columns by introducing a simple correction factor ($\alpha$) which relates maximum lateral confining stress of the column to the evolution of deviatoric plasticity. Then, a finite element analysis is carried out for the strengthened reinforced concrete columns using the modified EPF model and equally spaced truss elements. It is shown that the, analysis predicts well the failure behavior of reinforced concrete columns strengthened with glass fiber sheets.

  • PDF

구속조건이 콘크리트 응력-변형률 관계에 미치는 영향 (Effect of confinement conditions on the stress-strain relations of concrete)

  • 임석빈;한택희;박남희;강영종
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2004년도 춘계학술대회 논문집
    • /
    • pp.1211-1220
    • /
    • 2004
  • The confined concrete subjected multi-axial stresses have been known as the strength of concrete increases significantly. Many researchers have studied in confining effects of concrete, and now are studying in many fields. However, there are few passive confinements by steel tube. Although Mander et al. studied the concrete confined by transverse reinforcements, the confinement by steel tube differs from confining of reinforcements. To investigate the influence of concrete strength increased by confining conditions in steel, 51 specimens confined by different shapes and thicknesses of steel tube were tested and compared.

  • PDF

콘크리트의 구속효과와 재료비선형을 고려한 내부 구속 CFT 기둥의 축력-모멘트 상호작용 분석 (Analysis of the Axial Force-Bending Moment Interaction for a CFT Column Considering the Confining Effect and the Material Nonlinearity of Concrete)

  • 한택희;염응준;윤기용;이창수;강진욱;강영종
    • 한국전산구조공학회:학술대회논문집
    • /
    • 한국전산구조공학회 2006년도 정기 학술대회 논문집
    • /
    • pp.141-148
    • /
    • 2006
  • Concrete in a CFT(Concrete Filled Tube) column has enhanced strength and ductility because it is triaxially confined by a steel tube. But CFT columns are designed based on linear analyses by stress block method without the confining effect or the nonlinearity of the concrete. These make the significantly difference between the analysis results and the experimental results. Thus in this study, a nonlinear CFT column model was developed considering the confining effect on the concrete in a CFT column. This developed model was verified by experimental results from other researchers and compared with the results of various specifications. With the developed model, parametric studies were performed and the developed column model showed reasonable and accurate results.

  • PDF