• 디지털융복합연구
• /
• 제10권1호
• /
• pp.335-339
• /
• 2012

소프트웨어 형상관리는 소프트웨어 제품에 기반이 되는 대규모 소프트웨어 산출물 집합을 관리하는 분야이다. 형상관리는 과거 수년 동안 빠르게 발달해왔지만, 새로운 형상관리 시스템은 여전히 요구되고 있다. 전통적인 방법을 쓰거나 형상관리에 대한 연구보다는 현재 개발 프로젝트의 필요한 전문적인 관리가 필요하다. 따라서 형상관리에 필요한 저장소의 일반적인 모델이나 형상관리에 변형에 따른 과정을 관리하고 프로그램에 연결되어 있는 프로그램의 인터페이스를 분리하여 관리하는 기법이 필요하다. 본 논문은 형상관리에 필요한 저장소를 제공하고 프로그램과 인터페이스를 분리하여 관리하는데 필요한 의사결정 시스템을 도입하였다. 따라서 필요한 형상관리의 의존도를 가지고 새로운 접근법을 시도하였다. 의존도가 높은 개별적 컴포넌트의 변형과 결합을 위해 의사결정 시스템을 이용하여 확인 및 검증을 하여 소프트웨어 개발에 필요한 형상관리를 제공하고 있다.

• 제어로봇시스템학회논문지
• /
• 제22권2호
• /
• pp.153-161
• /
• 2016

This paper proposes a bridge model for data exchange and service invocation between OPRoS and ROS platforms, shows the validity of the proposed model via applications, and compares the proposed model with the OPRoS platform and the ROS platform using performance measures such as data exchange time and service response time. The proposed model operates independently of OPRoS and ROS Platforms using its configuration file with mapping information among the OPRoS data/service port and the ROS topic/service. The configuration file makes easy connections between OPRoS data/service and ROS topic/service without changing the source code of the platform and components.

• Computers and Concrete
• /
• 제14권6호
• /
• pp.711-725
• /
• 2014

The purpose of this study is to evaluate the behavior and the strength of SRG (Steel Reinforced Grout) externally strengthened Reinforced Concrete (RC) beams by using a nonlinear numerical analysis. The numerical simulation was carried out by using a three-dimensional (3D) finite element model. An interface element with a suitable damage model was used to model the connection between concrete surface and SRG reinforcing layer. The reliability of the finite element 3D-model was checked using experimental data obtained on a set of three RC beams. The parameters taken into consideration were the external configuration, with or without U-end anchorages, the concrete strength, the amount of internal tensile steel reinforcement. Conclusions were made concerning the strength and the ductility of the strengthened beams by varying the parameters and on the effectiveness of the SRG reinforcing system applied with two types of external strengthening configuration.

• 한국IT서비스학회지
• /
• 제10권3호
• /
• pp.189-201
• /
• 2011

Feature models are widely used to model commonalities and variabilities among products during software product line development. Feature configurations are generated by selecting the features to be included in individual products. Automated tools to identify errors or inconsistencies in the feature models and configurations are essential to successful software product line engineering. This paper proposes a verification technique and tool based on semantic web technologies such as OWL, SWRL and Protege API. This approach checks the feature model and configuration based on predefined rules and provides information on existence of errors as well as the kinds of those errors. This approach is extensible due to ease of rule modification and may be easily applied to other environments because semantic web technologies can be easily integrated with other programming environments. This paper demonstrates how various semantic web-related technologies can support automatic verification of one kind of software development artifact, the feature model.

• 한국경영과학회지
• /
• 제23권1호
• /
• pp.17-28
• /
• 1998

This study suggests a procedure for designing cellular manufacturing systems (CMS) which are combined with automated guided vehicles (AGVs) using a tandem configuration. So far most of the previous studies have dealt with conventional design problems not considering the layout and the characteristics of transporters used in CMS. A mathematical model is developed using the service time to perform material transfers as a suitable meassure. The service capacity of AGVs and space limitations are also reflected in this model. As the model can be shown strongly NP-hard, a heuristic algorithm is presented, in which each cell is temporarily formed using both the set covering model and similarity coefficients, and then locations of the cells are determined by means of tabu search and finally machine perturbations are carried out. An example problem is solved to demonstrate the algorithm developed.

• 한국IT서비스학회지
• /
• 제11권4호
• /
• pp.171-180
• /
• 2012

Since software and hardware integration has became a strategic tool for companies to innovate their products, an information system that can comprehensively manage software and hardware integrated product development is critical for the current product development. This paper proposed a product data model that can support modules of related software and hardware parts in Product Data Management(PDM) integrated with Software Configuration Management(SCM). The model allows engineers to define software and hardware product structure independently, and support the integration module that can summon related software and hardware parts to build a comprehensive module for collaboration. Through the integration module, engineers can identify and examine the effectiveness of their design alternatives to other related parts form different disciplines. The product data model was implemented as a prototype PDM system and tested with an example robotics product.

• 대한수학회지
• /
• 제61권3호
• /
• pp.565-602
• /
• 2024

We study the collective behaviors of two second-order nonlinear consensus models with a bonding force, namely the Kuramoto model and the Cucker-Smale model with inter-particle bonding force. The proposed models contain feedback control terms which induce collision avoidance and emergent consensus dynamics in a suitable framework. Through the cooperative interplays between feedback controls, initial state configuration tends to an ordered configuration asymptotically under suitable frameworks which are formulated in terms of system parameters and initial configurations. For a two-particle system on the real line, we show that the relative state tends to the preassigned value asymptotically, and we also provide several numerical examples to analyze the possible nonlinear dynamics of the proposed models, and compare them with analytical results.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.120-131
• /
• 2005

Statement of problem. More than 70% of patients who need the implant supported restoration are parially edentulous. The principles of design for implant supported fixed partial denture in mandibular posterior region are many and varied. Jurisdiction for their use is usually based on clinical evaluation. There are several areas or interest regarding the design of implant supported fixed partial denture in mandibular posterior region. 1) Straight and tripod configuration in implant placement, 2) Two restoration types such as individualized and splinted restorations. Purpose. The purpose of this study was to compare the amount and distribution of stress around the implant fixtures placed in the mandibular posterior region with two different arrangements and to evaluate the effects of splinting using the photoelastic stress analysis. Material & methods. 1) Production of study model: Mandibular partially edentulous model was waxed-up and duplicated with silicone and two models were poured in stone. 2) Fixture installation and photoelastic model construction: Using surveyor(Ney, USh), 3 fixtures(two 4.0 $\times$13 mm, one 5.0$\times$10 mm, Lifecore, USA) were insta)led in straight & tripod configurations. Silicone molds were made and poured in photoelastic resin (PL-2. Measurements group, USA). 3) Prostheses construction: Four 3-unit bridges (Type III gold alloy, Dongmyung co., Korea) were produced with nonhexed and hexed UCLA abutments and fitted with conventional methods. The abutments were tightened with 30 Ncm torque and the static loads were applied at 12 points of the occlusal surface. 4) Photoelastic stress analysis : The polarizer analyzer system with digital camera(S-2 Pro, Fujifilm, Japan) was used to take the photoelastic fringes and analysed using computer analysis program. Results. Solitary hexed UCLA restoration developed different stress patterns between two implant arrangement configurations, but there were no stress transfer to adjacent implants from the loaded implant in both configurations. However splinted restorations showed lesser amount of stresses in the loaded implants and showed stress transfer to adjacent implants in both configurations. Solitary hexed UCLA restoration with tripod configuration developed higher stresses in anterior and middle implants under loading than implants with straight configurations. Splintied 3 unit fixed partial dentures with tripod configuration showed higher stress development in posterior implant under loading but there were no obvious differences between two configurations. Conclusions. The tripod configuration of implant arrangement didn't show any advantages over the straight configuration. Splinting of 3 unit bridges with nonhexed UCLA abutments showed less stress development around the fixtures. Solitary hexed UCLA restoration developed tilting of implant fixture under offset loads.

• Korea-Australia Rheology Journal
• /
• 제16권1호
• /
• pp.1-15
• /
• 2004

The computation of viscoelastic flow using neural networks and stochastic simulation (CVFNNSS) is developed from the point of view of Eulerian CONNFFESSIT (calculation of non-Newtonian flows: finite elements and stochastic simulation techniques). The present method is based on the combination of radial basis function networks (RBFNs) and Brownian configuration fields (BCFs) where the stress is computed from an ensemble of continuous configuration fields instead of convecting discrete particles, and the velocity field is determined by solving the conservation equations for mass and momentum with a finite point method based on RBFNs. The method does not require any kind of element-type discretisation of the analysis domain. The method is verified and its capability is demonstrated with the start-up planar Couette flow, the Poiseuille flow and the lid driven cavity flow of Hookean and FENE model materials.

• 천문학회보
• /
• 제35권2호
• /
• pp.49.2-49.2
• /
• 2010

In order to understand the configuration of magnetic field producing a solar penumbral microjet that was recently discovered by Hinode, we performed a magnetohydrodynamic simulation reproducing a dynamic process of how that configuration is formed in a modeled solar penumbral region. A horizontal magnetic flux tube representing a penumbral filament is placed in a stratified atmosphere containing the background magnetic field that is directed in a relatively vertical direction. Between the flux tube and the background field there forms the intermediate region in which the magnetic field has a transitional configuration, and the simulation shows that in the intermediate region magnetic reconnection occurs to produce a clear jet- like structure as suggested by observations. The result that a continuous distribution of magnetic field in three-dimensional space gives birth to the intermediate region producing a jet presents a new view about the mechanism of a penumbral microjet, compared to a simplistic view that two field lines, one of which represents a penumbral filament and the other the background field, interact together to produce a jet. We also discuss the role of the intermediate region in protecting the structure of a penumbral filament subject to microjets.