• 한국항공운항학회지
• /
• 제20권3호
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• 한국항공운항학회지
• /
• 제25권3호
• /
• pp.115-122
• /
• 2017

To achieve designed quality and reliability from R&D to force integration, an establishment of precise and distinct specifications and standards are required. However, the recent process of R&D standardization on defense acquisition system, has brought plenty of corrections on specifications and standards that may cause not only difficulties to production line and retardation to the military forces, but also a degradation of provided weapon systems. Therefore, a technical review should be performed by the developer, the producer, and the client, establishing the standard that include mass production requirements as well as clients' requirements. This paper propose a specified solution on process of R&D standardization, by applying a substantial FCA(Functional Configuration Audit) and PCA(Physical Configuration Audit) which implies participation of related agencies. By the improved PCA, 2,023 corrections on 74 types of QAR(Quality Assurance Requirement)s and 12,715 corrections on drawings are identified.

• 한국데이타베이스학회:학술대회논문집
• /
• 한국데이타베이스학회 1999년도 국제컨퍼런스 디지털컨텐츠 활용을 통한 지식경영의 확산
• /
• pp.165-171
• /
• 1999

형상관리는 프로젝트를 추진함에 있어 현실적으로 필수적인 관리 항목으로 인식할 필요성이 대두되고 있다. 그 이유는 프로젝트를 성공적으로 완료하기 위해서는 전체 프로젝트 공정을 통해 사전에 계획된 절차에 준하여 단계별로 어떻게 추진되고 있는지 추진과정을 추적, 확인되어야 하며, 또한 추진 결과에 있어 단계별로 어떤 결과물이 양산되고 있는지를 검증 및 확인하여야 하기 때문이다. 본 논문에서는 이러한 형상관리를 위해서는 프로젝트 수행 초기에 형상관리 계획을 입안하기 위한 형상관리 조직형태를 제안하며 작성된 계획서에 수록된 형상관리 조직을 운영함에 있어 필요한 형상관리활동의 주요 내용들에 대해 국내외 표준 및 지침에 대해 조사하였으며, 현실적으로 공공 프로젝트를 추진함에 있어 형상관리를 위한 필수관리 항목과 문서화 기준 및 이들 문서들간의 연관성에 대해 연구, 제안한다.

• 한국전자거래학회지
• /
• 제2권2호
• /
• pp.1-30
• /
• 1997

In this research, the concept of CM (configuration management) is introduced for proper applications to the life-cycle product data management. In addition, the activities for CM - CM management and planning, configuration identification, configuration control, configuration status accounting, and configuration verification and audit - are described in detail. For the management of distributed configuration data among governments, prime contractors, and subcontractors, development environments and functions for the configuration management information system (CMIS) are proposed.

• 디지털융복합연구
• /
• 제13권7호
• /
• pp.183-196
• /
• 2015

서비스수준협약(SLA)은 IT 서비스의 품질개선을 통해 성공적인 아웃소싱 수행을 위해 많이 연구가 되어왔다. 특히 SLA 측정 지표와 평가기준은 IT 아웃소싱을 추진하는 회사(이용자, 서비스 제공자)의 IT 생존성에 영향을 주는 중요한 요소이다. SLA 측정 지표들은 기술적, 관리적, 사용자적 관점의 항목들로 구성되어 있으며, 안정적인 IT 서비스의 제공과 지속적인 품질개선을 목표로 관리하고 있다. 본 연구에서는 IT 아웃소싱의 SLA 지표 중 HW 가용성 지표에 중점을 두고 있다. 발주자(이용자)의 시스템 환경을 고려하여 SLA 목표 수준을 정하여 SLA 계약과 평가가 될 수 있는 HW 구성 수준에 맞는 인프라 가용성 기준을 제안한다. SLA 계약상의 인프라 구성 기준을 제시하고, IT 운영감리 환경에서 목표수준의 적정성을 확인 할 수 있는 기준을 제안한다. 제안한 모델은 관련 분야의 전문가 및 경험자들의 설문을 통해서 인프라 구성 기준과 운영감리 개선항목에 대한 필요성과 효과성을 검증하였다.

• 한국항해학회지
• /
• 제24권1호
• /
• pp.47-56
• /
• 2000

As a shipboard dependency for the safety and reliability becomes very important, the need for solid systems providing non-stop workload has been increased. This system is heartbeat that transmits shipboard state, audit and control information to the land. So, this paper describes a ship's LAN configuration method for the safety and reliability. In order to achieve these requirements, network, server and disk fault tolerance techniques are surveyed, and dual network configuration model, cluster server configuration method are presented and tested based on the survey.

• 시스템엔지니어링학술지
• /
• 제7권1호
• /
• pp.53-56
• /
• 2011

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design, development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management process, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of Technical Management process.

• 항공우주시스템공학회지
• /
• 제9권4호
• /
• pp.8-15
• /
• 2015

Unmanned Aircraft System(UAS) is a huge and complicated system that is composed of UAV, ground control system, datalink system, and mission equipments. We have applied system engineering to development of UAS. Configuration management is very important activity for efficient developments. The Configuration management process comprises four distinct disciplines (Configuration identification, Configuration control, Configuration status accounting, and Configuration audit). This paper explains the configuration management system of UAS development project which ADD executes and introduces several examples of these four disciplines.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.1095-1096
• /
• 2006

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of City Train Standard Specification Management process.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.269-272
• /
• 1998

The disks containing all the system software-OS(Operating System), application program, and DB(Data Base)-happen to be broken. This happens not only to general computer systems but also to electronic switching system. In the electronic switching system, this causes the essential data and software needed for operating the system to be damaged and is fatal to services, so that they should be recovered as soon as possible. Especially the data, having the information of subscriber, trunk, prefix, and system configuration should be receovered preferentially. To manage this situation, the system should let the operator know that the data are damaged and recover the damaged data. This paper shows a way of recovering this damaged data, the object data of audit, the structure of DBMS and the implementation of audit in the case of the domestic high capacity electronic switching system, TDX-10A.