• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.20 no.3
• /
• pp.35-43
• /
• 2012

Medium size rotorcraft consist of approximately 5,000 key components. The components must satisfy the target weight and performance requirement through optimization. Therefore a rotorcraft component has approximately 100 times higher unit cost for mass production than the equivalent of an automobile's, along with huge development cost. Configuration management consists of four main parts : configuration identification, configuration control, configuration audit, and data management. In development programme, configuration management is one of the methods to save development cost, and setting a well-structured configuration management system according to the Military Standard is an important factor in success of the programme. The paper proposes a configuration management system suitable for development of various multi-use components development and presents that the configuration management was performed successfully during dual-use component development programme using the established system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.25 no.3
• /
• pp.115-122
• /
• 2017

To achieve designed quality and reliability from R&D to force integration, an establishment of precise and distinct specifications and standards are required. However, the recent process of R&D standardization on defense acquisition system, has brought plenty of corrections on specifications and standards that may cause not only difficulties to production line and retardation to the military forces, but also a degradation of provided weapon systems. Therefore, a technical review should be performed by the developer, the producer, and the client, establishing the standard that include mass production requirements as well as clients' requirements. This paper propose a specified solution on process of R&D standardization, by applying a substantial FCA(Functional Configuration Audit) and PCA(Physical Configuration Audit) which implies participation of related agencies. By the improved PCA, 2,023 corrections on 74 types of QAR(Quality Assurance Requirement)s and 12,715 corrections on drawings are identified.

• Proceedings of the Korea Database Society Conference
• /
• 1999.10a
• /
• pp.165-171
• /
• 1999

형상관리는 프로젝트를 추진함에 있어 현실적으로 필수적인 관리 항목으로 인식할 필요성이 대두되고 있다. 그 이유는 프로젝트를 성공적으로 완료하기 위해서는 전체 프로젝트 공정을 통해 사전에 계획된 절차에 준하여 단계별로 어떻게 추진되고 있는지 추진과정을 추적, 확인되어야 하며, 또한 추진 결과에 있어 단계별로 어떤 결과물이 양산되고 있는지를 검증 및 확인하여야 하기 때문이다. 본 논문에서는 이러한 형상관리를 위해서는 프로젝트 수행 초기에 형상관리 계획을 입안하기 위한 형상관리 조직형태를 제안하며 작성된 계획서에 수록된 형상관리 조직을 운영함에 있어 필요한 형상관리활동의 주요 내용들에 대해 국내외 표준 및 지침에 대해 조사하였으며, 현실적으로 공공 프로젝트를 추진함에 있어 형상관리를 위한 필수관리 항목과 문서화 기준 및 이들 문서들간의 연관성에 대해 연구, 제안한다.

• The Journal of Society for e-Business Studies
• /
• v.2 no.2
• /
• pp.1-30
• /
• 1997

In this research, the concept of CM (configuration management) is introduced for proper applications to the life-cycle product data management. In addition, the activities for CM - CM management and planning, configuration identification, configuration control, configuration status accounting, and configuration verification and audit - are described in detail. For the management of distributed configuration data among governments, prime contractors, and subcontractors, development environments and functions for the configuration management information system (CMIS) are proposed.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.183-196
• /
• 2015

In order to perform a successful outsourcing, we needs the SLA through improving the quality of IT services. In particular SLA metrics and evaluation criteria is an important factor as to substitute the IT viability of the company to promote IT Outsourcing. SLA metrics consist of technical, managerial, user perspective items, and has been managed to aim to provide reliable and continuous quality improvement of IT services. This study focuses on the HW availability metrics of SLA indicators of IT outsourcing. We propose the Infra availability criteria for the HW configuration level to meet the SLA contract and evaluation. We offer the Infra configuration standards of SLA contract, and propose criteria to determine the suitability of the target levels in IT operations audit environment. The proposed model was verified the necessity and effectiveness of the Infra configuration standards and operation audit check items through the surveys of experts and users.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.47-56
• /
• 2000

As a shipboard dependency for the safety and reliability becomes very important, the need for solid systems providing non-stop workload has been increased. This system is heartbeat that transmits shipboard state, audit and control information to the land. So, this paper describes a ship's LAN configuration method for the safety and reliability. In order to achieve these requirements, network, server and disk fault tolerance techniques are surveyed, and dual network configuration model, cluster server configuration method are presented and tested based on the survey.

• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.1
• /
• pp.53-56
• /
• 2011

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design, development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management process, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of Technical Management process.

• Journal of Aerospace System Engineering
• /
• v.9 no.4
• /
• pp.8-15
• /
• 2015

Unmanned Aircraft System(UAS) is a huge and complicated system that is composed of UAV, ground control system, datalink system, and mission equipments. We have applied system engineering to development of UAS. Configuration management is very important activity for efficient developments. The Configuration management process comprises four distinct disciplines (Configuration identification, Configuration control, Configuration status accounting, and Configuration audit). This paper explains the configuration management system of UAS development project which ADD executes and introduces several examples of these four disciplines.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1095-1096
• /
• 2006

Configuration management plays a key role in systems engineering process for any project from earlier stage of development. It consists of five major activities, ie., configuration management planing, configuration identification, configuration control, configuration status accounting and configuration verification and audit, and is essential to control system design development and operation throughout entire life cycle of the system development. And it is directly associated with other part of systems engineering management, ie., technical data management which provides traceability of important decisions and changes during development. In this paper, we describe how to apply CASE(Computer-aided Systems Engineering) tool-Cradle for the configuration management to achieve effectiveness of City Train Standard Specification Management process.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.269-272
• /
• 1998

The disks containing all the system software-OS(Operating System), application program, and DB(Data Base)-happen to be broken. This happens not only to general computer systems but also to electronic switching system. In the electronic switching system, this causes the essential data and software needed for operating the system to be damaged and is fatal to services, so that they should be recovered as soon as possible. Especially the data, having the information of subscriber, trunk, prefix, and system configuration should be receovered preferentially. To manage this situation, the system should let the operator know that the data are damaged and recover the damaged data. This paper shows a way of recovering this damaged data, the object data of audit, the structure of DBMS and the implementation of audit in the case of the domestic high capacity electronic switching system, TDX-10A.