• 제목/요약/키워드: Conference recording

검색결과 585건 처리시간 0.028초

CT 정도관리 영상의 정량적 분석방법에 관한 연구 (Phantom of the AAPM CT imaging evaluation Studies on the quantitative analysis method)

  • 김영수;고성진;강세식;예수영
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2016년도 춘계학술대회
    • /
    • pp.271-274
    • /
    • 2016
  • CT 정도관리 영상평가는 팬텀 영상평가를 통한 정량적인 평가로 시행하며, 평가 항목으로는 물의 감약 계수, 균일도, 노이즈, 대조도 분해능, 공간분해능, 10mm 슬라이스 두께 평가 등이 있으며, 대조도 분해능, 공간 분해능, 슬라이스 두께 평가의 경우, 검사자의 주관적인 판단에 의한 평가로 인한 오류를 예상할 수 있으므로, 주관적인 오류를 최소화 하고자 전산화된 영상처리 프로그램을 이용하여 객관적인 평가를 하고자 한다. CT 정도관리 영상평가의 기본 촬영 조건은 특수의료장비 품질관리검사와 동일하며, IMAGE J를 이용하여 영상을 정량적으로 평가하였다. CT 감약계수, 균일도, 노이즈 평가의 경우, CT 정도 관리 영상에 비하여 디지털 처리 영상의 측정값의 표준편차가 더 작아 잡음이 적고 균일한 영상이라고 평가하였으며, 대조도 분해능 평가는 원의 직경의 크기가 큰 1인치, 0.75인치, 0.5인치의 경우 원형, 원의 직경이 작아질수록 타원에 가까운 원형으로 평가되었다. 공간분해능 평가는 영상처리 프로그램의 자동추출 기능을 이용하여, 합격기준을 포함하는 원의 그룹을 모두 자동으로 추출하여, 정량적인 평가에 매우 유용하다고 평가하였다. 위의 결과 등을 바탕으로 CT 정도관리 영상 평가 시, 영상처리 프로그램을 이용한다면 평가자의 주관적인 판단 오류를 최소화하고, 보다 더 효율적인 정량적평가가 이루어 질 것이라고 판단된다.

  • PDF

QTL Identification for Slow Wilting and High Moisture Contents in Soybean (Glycine max [L.]) and Arduino-Based High-Throughput Phenotyping for Drought Tolerance

  • Hakyung Kwon;Jae Ah Choi;Moon Young Kim;Suk-Ha Lee
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.25-25
    • /
    • 2022
  • Drought becomes frequent and severe because of continuous global warming, leading to a significant loss of crop yield. In soybean (Glycine max [L.]), most of quantitative trait loci (QTLs) analyses for drought tolerance have conducted by investigating yield changes under water-restricted conditions at the reproductive stages. More recently, the necessity of QTL studies to use physiological indices responding to drought at the early growth stages besides the reproductive ones has arisen due to the unpredictable and prevalent occurrence of drought throughout the soybean growing season. In this study, we thus identified QTLs conferring wilting scores and moisture contents of soybean subjected to drought stress in the early vegetative stage using an recombinant inbred line (RIL) population derived from a cross between Taekwang (drought-sensitive) and SS2-2 (drought-tolerant). For the two traits, the same major QTL was located on chromosome 10, accounting for up to 11.5% of phenotypic variance explained with LOD score of 12.5. This QTL overlaps with a reported QTL for the limited transpiration trait in soybean and harbors an ortholog of the Arabidopsis ABA and drought-induced RING-D UF1117 gene. Meanwhile, one of important features of plant drought tolerance is their ability to limit transpiration rates under high vapor pressure deficiency in response to mitigate water loss. However, monitoring their transpiration rates is time-consuming and laborious. Therefore, only a few population-level studies regarding transpiration rates under the drought condition have been reported so far. Via employing an Arduino-based platform, for the reasons addressed, we are measuring and recording total pot weights of soybean plants every hour from the 1st day after water restriction to the days when the half of the RILs exhibited permanent tissue damage in at least one trifoliate. Gradual decrease in moisture of soil in pots as time passes refers increase in the severity of drought stress. By tracking changes in the total pot weights of soybean plants, we will infer transpiration rates of the mapping parents and their RILs according to different levels of VPD and drought stress. The profile of transpiration rates from different levels of severity in the stresses facilitates a better understanding of relationship between transpiration-related features, such as limited maximum transpiration rates, to water saving performances, as well as those to other drought-responsive phenotypes. Our findings will provide primary insights on drought tolerance mechanisms in soybean and useful resources for improvement of soybean varieties tolerant to drought stress.

  • PDF

소아에서의 급성 호흡 곤란 증후군에 대한 임상적 고찰 (A Clinical Study of the Acute Respiratory Distress Syndrome in Children)

  • 이택진;김동수;신동환
    • Clinical and Experimental Pediatrics
    • /
    • 제46권1호
    • /
    • pp.42-50
    • /
    • 2003
  • 목 적 : 소아의 급성 호흡 곤란 증후군은 직접적 혹은 간접적 폐 손상 후 급성적으로 폐포-모세혈관의 손상이 심하게 진행하는 질환군으로 이에 대한 임상 및 연구 자료들이 아직은 부족한 실정이다. 연자들은 단일 기관에서 경험한 소아의 급성 호흡 곤란 증후군에 대한 발생 양상, 임상 경과, 예후 및 사망 원인들을 분석하여 향후 이 질환에 대한 진단과 치료에 도움이 되고자 하였다. 방 법 : 1992년 1월부터 2001년 12월까지 10년간 신촌세브란스병원 소아과에 내원하여 급성 호흡 곤란 증후군으로 진단되었거나 의심되었던 환아 45명 중 1994년 American-European Consensus Conference에서 제안한 진단 기준에 부합하는 33례를 대상으로 임상 양상과 치료에 대한 후향적 자료 분석을 하였다. 결 과 : 대상 환아 33명의 연령별 발병 빈도는 1세 미만에서 가장 많았으며(7례, 21.2%) 4세 미만의 환아의 수는 20례로 전체의 60.6%를 차지하였다. 반면 연령별 사망률은 1세 미만에서 57.1%로 가장 낮아 전체 사망률 78.8%(26례)에 비해 상대적으로 치료성적이 좋았으나 통계적 의미는 없었다. 남아가 20명이고 여아가 13명으로 남녀비는 약 6 : 4였고 각각의 사망률의 차이는 없었다. 계절별 발병 빈도는 봄철(3-5월)에 12례(36.4%)로 비교적 높았으며 특히 5월에 7례로(21.2%) 가장 높았다. 유발요인으로는 폐렴, 패혈증, 흡인성 사고 등의 순이었으며, 골수 이식 수혜자 1례를 포함하여 면역 결핍 상태의 환아들이 전체의 18.2%(6례)를 차지하였는데 이들 모두가 사망하였다. 내원 당시 흉부 방사선 검사에서 grade 4 이상의 소견을 보인 환아들 중 88.9%(8/9)가 사망하였으나 흉부 방사선 소견에 따른 사망률의 통계학적 차이는 없었다. 진단 시 호흡 부전만 보인 군의 사망률 33.3%(1/3)에 비해 타 장기의 기능 부전이 동반된 군의 사망률이 83.3%(25/30)로 증가되었지만 두 군 사이의 사망률의 통계학적 차이는 보이지 않았다. 생존군과 사망군의 비교에서는 진단후 7일째 헤마토크리트, 동맥혈 산소 분압, 동맥혈 이산화탄소 분압, $PaO_2/FiO_2$, 그리고 호기말 양압 등에서 유의한 차이를 나타냈다. 결 론 : 급성 호흡 곤란 증후군의 사망률에는 호흡 부전이 중요한 영향을 미치며 생존을 위한 보다 적극적인 치료가 연구되고 도입되어야 할 것으로 사료된다.

환자분류에 의한 일개 2차 의료기관의 간호업무량 조사;전산화를 위한 기초작업으로서 (Measurement of the Nursing Workload by Patient Classification System in a Secondary Hospital;As a Preliminary Step for Computerization of Nursing Staffing and Scheduling)

  • 박정호;조현;박현애;한혜라
    • 간호행정학회지
    • /
    • 제1권1호
    • /
    • pp.132-146
    • /
    • 1995
  • Even though Korean medical law stipulates that number of patients attended by a nurse is 2.5 for hospitalization and 30 for ambulatory care, the number of patients cared by a nurse per day is much greater than the standard prescribed by the medical law. Current productivity of nurses is not desirable unless the quality of care is considered. And nursing manpower staffing based on neither current nurses' productivity nor standard of medical law cannot respond properly to dynamic situation of the medical services. Under this background, the necessity of more efficient management of nursing manpower occupying 1/3 of total hospital workers has been recognized by many nursing administrators. Many nursing researchers have studied to foretell the nursing manpower objectively on the basis of measured nursing workload according to patient classification as well. Most of These researches, however, have been conducted in the tertiary hospitals, so it is imperative to conduct other researches to predict necessary nursing manpower in the secondary and the primary hospitals. The study was performed to measure nursing workload and predict pertinent nursing manpower to a secondary hospital with 400beds. Nursing workload was surveyed using measuring tool for direct and indirect care hours in a surgical unit and a medical unit. Survey was conducted from Sep.10 to Sep.16 and from Oct.5 to Oct.11, 1994 respectively by two skilled nurses, Subjects were patients, patients' family members and nursing personnels. Results are follows : 1. Patient classification distributed as 22% of class I (mildly ill patient), 57% of class II (moderately ill patient), and 21% of class III (acutely ill patient) in the medical nursing unit, while 23% of class I, 29% of class II, 12% of class III, and 36% of classIV (critically ill patient) in the surgical nursing unit. There was no difference of inpatient number between weekday and weekend. Bed circulation rate was 89% in both units and average patients number per day was 37.4 (total 42beds) in the medical nursing unit, 32.9 (total 37beds) in the medical nursing unit. 2. Direct care hours per day measured as 2.8hrs for class I, 3.3hrs for class II, and 3.5hrs for class III in the medical nursing unit, while 3.1hrs for class I, 3hrs for class II, 2.7hrs for class III, and 2.2hrs for classIV in the surgical nursing unit. Meanwhile, hours for nursing assistant activities per patient by patients' family members were 11mins and 200mins respectively. Direct care hour rate by shift was day 36%, evening 25%, and night 39% in the medical nursing unit, while 40%, 29%, and and 31% respectively in the surgical nursing unit. 3. Measurement and observation activity held 44.2% of direct care activities of nurses and medication 36.7%, communication 11.7%, exercise 1.8%, treatment 1.3%, hygiene 1.3%, elimination and irrigation 1.1%, suction 1%, nutrition 0.5%, thermotherapy 0.3%, oxygen therapy 0.1% in order. 4. Indirect care hours per day were 294.2mins in the medical nursing unit, and 273.9mins in the surgical nursing unit. By shift, evening was the highest in both units. Indirect care hours for each patient were 44.5mins in the medical nursing unit and 46mins in the surgical nursing unit. 5. checking activities including doctor's order, medication, and delivering patients to the next shift occupied 39.7% of indirect care activities, and preparation 26%, recording 23.8%, communication and conference 6.7%, managing equipments 2.1%, messenger activity 1.7% in order. 6. On the ground of these results, nursing manpower needed in a secondary hospital was estimated ; 27 nursing personnels for the medical nursing unit of 37beds, and 20 nursing personnels for the surgical nursing unit of 33beds.

  • PDF

탄소계 경질 박막의 연구 및 산업 적용 동향 (Trend in Research and Application of Hard Carbon-based Thin Films)

  • 이경황;박종원;양지훈;정재인
    • 한국표면공학회:학술대회논문집
    • /
    • 한국표면공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.111-112
    • /
    • 2009
  • Diamond-like carbon (DLC) is a convenient term to indicate the compositions of the various forms of amorphous carbon (a-C), tetrahedral amorphous carbon (ta-C), hydrogenated amorphous carbon and tetrahedral amorphous carbon (a-C:H and ta-C:H). The a-C film with disordered graphitic ordering, such as soot, chars, glassy carbon, and evaporated a-C, is shown in the lower left hand corner. If the fraction of sp3 bonding reaches a high degree, such an a-C is denoted as tetrahedral amorphous carbon (ta-C), in order to distinguish it from sp2 a-C [2]. Two hydrocarbon polymers, that is, polyethylene (CH2)n and polyacetylene (CH)n, define the limits of the triangle in the right hand corner beyond which interconnecting C-C networks do not form, and only strait-chain molecules are formed. The DLC films, i.e. a-C, ta-C, a-C:H and ta-C:H, have some extreme properties similar to diamond, such as hardness, elastic modulus and chemical inertness. These films are great advantages for many applications. One of the most important applications of the carbon-based films is the coating for magnetic hard disk recording. The second successful application is wear protective and antireflective films for IR windows. The third application is wear protection of bearings and sliding friction parts. The fourth is precision gages for the automotive industry. Recently, exciting ongoing study [1] tries to deposit a carbon-based protective film on engine parts (e.g. engine cylinders and pistons) taking into account not only low friction and wear, but also self lubricating properties. Reduction of the oil consumption is expected. Currently, for an additional application field, the carbon-based films are extensively studied as excellent candidates for biocompatible films on biomedical implants. The carbon-based films consist of carbon, hydrogen and nitrogen, which are biologically harmless as well as the main elements of human body. Some in vitro and limited in vivo studies on the biological effects of carbon-based films have been studied [$2{\sim}5$].The carbon-based films have great potentials in many fields. However, a few technological issues for carbon-based film are still needed to be studied to improve the applicability. Aisenberg and Chabot [3] firstly prepared an amorphous carbon film on substrates remained at room temperature using a beam of carbon ions produced using argon plasma. Spencer et al. [4] had subsequently developed this field. Many deposition techniques for DLC films have been developed to increase the fraction of sp3 bonding in the films. The a-C films have been prepared by a variety of deposition methods such as ion plating, DC or RF sputtering, RF or DC plasma enhanced chemical vapor deposition (PECVD), electron cyclotron resonance chemical vapor deposition (ECR-CVD), ion implantation, ablation, pulsed laser deposition and cathodic arc deposition, from a variety of carbon target or gaseous sources materials [5]. Sputtering is the most common deposition method for a-C film. Deposited films by these plasma methods, such as plasma enhanced chemical vapor deposition (PECVD) [6], are ranged into the interior of the triangle. Application fields of DLC films investigated from papers. Many papers purposed to apply for tribology due to the carbon-based films of low friction and wear resistance. Figure 1 shows the percentage of DLC research interest for application field. The biggest portion is tribology field. It is occupied 57%. Second, biomedical field hold 14%. Nowadays, biomedical field is took notice in many countries and significantly increased the research papers. DLC films actually applied to many industries in 2005 as shown figure 2. The most applied fields are mold and machinery industries. It took over 50%. The automobile industry is more and more increase application parts. In the near future, automobile industry is expected a big market for DLC coating. Figure 1 Research interests of carbon-based filmsFigure 2 Demand ratio of DLC coating for industry in 2005. In this presentation, I will introduce a trend of carbon-based coating research and applications.

  • PDF