• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1436-1441
• /
• 2006

In this paper, Computer-aided Maintenance Equipments, which are being used in High Speed Line Train Control System, are applied to analyze failures in train control systems, resulting in long time delays of trains. It can be expected to extend and apply CAMS(Computer Aided Maintenance System) in the hereafter efficient operation and maintenance of high speed railway train control systems, by comparison between the analysis result of fundamental causes, from high speed railway train control system failure occurred during the operational process, and predictive result of failure causes, based on the recording data of CAMS when failures were occurred.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.648-651
• /
• 1999

This paper introduces the characteristice of leakage current flowing through surface of polluted composite insulation materials. For recording of aged Polymer insulations, data acquisition system(DAS) was developed. These materials were wetted in NaCl solution(each 0.1 wt%, 0.4 wt%). And we boiled them during 24 hours. We measured the leakage current and weight changing of them, each 5 hours. As a result of this experiment, we could know that the leakage current of acted insulation materials was increased by boiling time.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.299-302
• /
• 2000

In this study, we have made the large holographic surface relief gratings on amorphous chalcogenide $As_{40}$$Ge_{10}$$Se_{15}$$S_{35}$ films by two beam interference using a He-Ne laser(632.8nm) light. The film thickness was about 0.6$\mu\textrm{m}$, we could magnify beam size by using beam expander. We made use $90^{\circ}$ holder which was made of reflection mirror and sample. Formed the surface relief structures were investigated using optical microscope. The diffraction efficiency was obtained by measuring +lst order intensity. In addition we investigated grating formation and diffraction efficiency as a function of polarization states which is linear or circular polarization. The results indicate that the grating was formed by linear polarized beam is better clear than that by circular polarized beam.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2002년도 춘계학술발표대회 논문집
• /
• pp.62-65
• /
• 2002

The purpose of this study was first, to confirm of the key hypothetical concepts through the research of previous literature analysis results, and second, to Identify responses of various prospective consumers on key hypothetical concepts and the validity of the plan for improvement before construction was employed through the small group workshop. The participants in workshop were working housewives with 1 or 2 children, residing in an apartment of a net area of 25.7py. The materials used in the process were questionnaire, existing apartment floor plan, developing floor plan for universal apartment, small scale model, endoscopy images, computer simulation images, and recording equipment like audio recorder, video tape recorder, and camera.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1428-1429
• /
• 2006

We investigated the diffraction efficiency, erasing property and rewriting property of diffraction grating with each wavelength of recording beam. A (P:P) polarized light was exposed on AsGeSeS and Ag/AsGeSeS thin film to form a diffraction grating by HeNe(635nm) laser and DPSS(532nm) laser. At the maximum efficiency condition, unpolarized HeNe laser beam was irradiated to erase 1ha generated diffraction grating. The HeNe laser showed more higher diffraction efficiency and the DPSS laser showed more faster diffraction grating time. At erasing and rewriting process, AsGeSeS(61%-85%)thin film showed better property than Ag doped Ag/AsGeSeS(53%-63%) double layer structured thin film.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 C
• /
• pp.1430-1431
• /
• 2006

We investigated the formation of 2-dimension hologram grating by means of selective etching characteristic and photo-expansion effect according to photo irradiation on amorphous As-Ge-Se-S thin film. By method of phase holography, we made the 2-dimensional hologram grating by each (S:P) and ($+45^{\circ}:-45^{\circ}$) polarized beam with DPSS laser(532nm) and He-Ne laser(632nm). A recording property was observed at each polarized beam through 2-dimensional hologram surface relief grating. Chalcogenide thin film was etched selectively by NaOH solution after the formation of 1-dimensional diffraction grating. And then etched sample was rotated 90 degree to fabricate 2 dimensional hologram grating. We found that it was observed the formation of 2-dimensional hologram grating by AFM(Atomic Force Microscopy).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.248-250
• /
• 1996

VTR 자기헤드의 핵심소재로 사용되는 ferrite는 VTR 의 주기능인 영상의 기록 및 재생역할에 가장 중요한 소재이다. 이러한 종류의 head는 지금까지 mask wet chemical etching과 mechanical Process 에 의해 제작 되어왔다. 그러나 기록용량의 중가로 자기장치의 recording density를 높일것이 요구됨에 따라 자기헤드의 gap width를 줄일 필요가 있게 되었다. 본 연구는 mask와 photoresist를 사용하지 않고 ferrite를 직접 미세가공 하는 laser-induced wet etching을 이용하여 자기헤드의 기록용량을 높이고자 하였다. $Ar^+$ laser ( 파장 514 nm )를 빔 확장기와 렌즈를 사용 하여 직경 $1.8{\mu}m$ 로 집속하고, $100{\sim}500\;mW$의 출력 변화를 주어 실험을 하였다. 인산 수용액 (45, 65, 85 %)을 etchant로 사용하여 $5{\sim}30{\mu}m/sec$의 주사속도로 etching 하여, 미세선폭과 high aspect ratio를 갖는 groove를 얻을 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 A
• /
• pp.453-455
• /
• 1993

In this research, the digital signal processing PC board which employs TI's TMS320C25 is implemented. The board can perform following functions. spectrum analysis of speech and repetitive signal, digital filters emulation by convolution, signal generation of sinusoidal wave, rectangular wave etc.. In this system, communications between PC and DSP board. program down-loading to DSP board and recording and graphic of acquired and processed data in DSP board are executed by PC. Parallel interface and buffer memory are used in communications. Data acquisition and operation are carried out in DSP board. Resultant data are transmitted to PC and output through DAC.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1996년도 춘계학술대회
• /
• pp.10-13
• /
• 1996

We have developed the digital polysomnograph system to enhance the manual sleep study. This system is composed of host PC and target board. The host computer is IBM-PC Pentium 133 MHz and the target board is PC31 (processor type: TMS320C31). These two Processors communicate with each other by dualport RAM. Target board acquire 16 channel sleep signals from the Polysomnographic system (GRASS model 78, USA) and digitize them. We used high resolution monitor$(1600{\times}1280)$ to simulate the paper-recording quality of polysomnographic signal. We also implemented the GUI based polysomnographic staging program on the windows environment. Clinicians can score the sleep stage, and edit and mark the event efficiently. Finally it can support making patient database.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.377-380
• /
• 2001

The vestibular system located in the inner ear controls reflex body posture and movement. It has the semicircular canals sensing an angular acceleration and the otolith organs sensing a linear acceleration. With this organic signal, medical doctor decide if a person has disease or not. To obtain this data, a precision stimular system is considered. Robust control is needed to obtain eye signals induced by off-vertical axis rotation because of an unbalanced load produced by tilting the axis of the system upto 30 degrees. In this study, off-vertical axis rotatory system with visual stimulation system are developed. This system is consisted of head mounted display for generating horizontal, vertical, and three dimensional stimulus patterns. Furthermore wireless recording system using RF modem is considered for noiseless data transmission.