• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.52-53
• /
• 2000

광굴절 단결정을 이용한 홀로그램 저장은 일반적으로 Fe 흑은 Ce 과 같이 한 가지 종류의 이온이 첨가된 재료를 사용해왔다. 그러나 저장된 홀로그램 정보를 재생할때 지워지지 않도록 정착화를 위해 사용된 열이나 전기장 대신 자외선을 이용한 방법이 최근에 시도되고 있다$^{(1)}$ . 이 방법은 모든 것을 광으로 처리할 수 있는 장점이 있으나 2광자 기록방법$^{(2)}$ 과는 달리 두 가지 종류의 이온 첨가물이 필요하므로 전하의 이동이나 트랩과정이 더욱 복잡할 수밖에 없다. 특히 LiNbO$_3$ 재료는 photovoltaic 특성이 매우 강하여 다른 광굴절 재료와 구별된다. congruent Mn,Fe:LiNbO$_3$에 대한 실험 결과[1]와 stoichiometric LiNbO$_3$에서의 작은 polaron과 쌍 polaron에 의한 기록과 재생실험결과$^{(3)}$ 의 발표는 있으나 2중 첨가물의 LiNbO$_3$에 대한 이론적 접근은 아직 알려진 바 없다. 본 연구에서는 Mn,Ce:LiNbO$_3$와 Fe,W:LiNbO$_3$에서의 홀로그램 기록특성을 연구하였고 photovoltaic 효과를 고려한 홀로그램의 형성과 소멸과정에 대한 수치해석을 이용하여 결과의 설명을 시도하였다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.162-163
• /
• 2000

근접장 주사 광학 현미경(Near-field scanning optical microscope)에서 가장 중요한 부분은 바로 근접장 탐침(Near-field optical probe)이다. 가간 널리 사용되는 근접장 탐침은 끝 부분에 매우 작은 구멍만 남기고 나머지 부분은 금속으로 코팅한 뾰족한 광섬유(Metal-clad tapered optical fiber)이다. 탐침의 끝에 형성된 작은 구멍은 진행하지 못하는 근접장(Near-field)을 진행하는 먼장(Far-field)으로 바꾸어줌으로서 회절한계를 뛰어넘는 분해능을 가능하게 한다. 그러나, 이러한 작은 구멍은 매우 작은 투과 효율(Transmission efficiency)을 가지기 때문에 고밀도 광기록(High-density optical recording)등에 이용하는데 큰 어려움이 있었다.$^{(1).(3)}$ 따라서 금속이 코팅된 뾰족한 광섬유 내에서 빛이 어떻게 진행되는지에 대한 연구를 통해 보다 높은 효율을 가지는 근접장 탐침을 개발하는 것이 중요한 과제가 되고 있다. 본 연구에서는 금속이 코팅된 뾰족한 광섬유 도파로 내에서 구멍의 크기와 빛의 투과 효율의 관계를 보고한다. (중략)

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2008.10a
• /
• pp.133-134
• /
• 2008

A novel near infrared(NIR) absorbing dyes were synthesized by using bis-aldehyde formyl aromatic compounds and heteroaryl derivatives with the reactive methylene group. These dyes provided a range of the NIR wavelength region about 720 nm value. Also, the light absorbing properties of these dyes were investigated in our experiment results. In generally, these NIR colorants may be potential used for optical recording media, DNA sequencing probe and laser beam printings.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.887-887
• /
• 2004

The areal density of the hard disk drive(HDD) has been increased due to technological advances recently. To achieve the high areal density magnetic recording requires an extremely small gap between the air-bearing surface (ABS) and disk. At the same time, the slider mass and size should be reduced to minimize the physical contact under the operational and environmental conditions. Almost all of 2.5＂HDD companies will get ready for adoption of FEMTO slider and already utilized the small slider. FEMTO and small size slider will be mainstream in the 2.5" and other small form factor HDD in the near future. In this study, the flying characteristic of FEMTO slider was examined. Based on the simulation, FEMTO slider is very stable in flying dynamic under the disk modulation, however the flying height sensitivity of the manufacturing tolerances is much bigger than PICO slider. And the other characteristics like impulse response and load/unload dynamic were also examined in this study.tudy.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.189-194
• /
• 2004

As a disk drive becomes widely used in portable environments, one of the important requirements is durability under severe environmental condition, especially, resistance to mechanical shock. An important challenge in the disk recording is to improve disk drive robustness in shock environments. If the system comes In contact with outer shock disturbance, the system gets critical damage in head-gimbal assembly or disk. This paper describes analysis of a HGA(head-gimbal assembly) in micro MO drives to shock loading during both non-operating state and operating state. A finite element model which consists of the disk, suspension, slider and air bearing was used to find structural response of micro MO drives. In the operational case. the air bearing is approximated with four linear elastic springs. The commercially available finite element solver, ANSYS/LS-DYNA, is used to simulate the shock response of the HGA in micro MO drives. In this paper, the mechanical robustness of the suspension is simuiated considering the shock responses of the HGA.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.888-893
• /
• 2004

This paper proposed a dual actuator using bimorph PZT for information storage device based on prove array NSOM(Near-field Scanning Optical Microscopy). The gap between the media and the optical head should be maintained within the optical tolerance. Therefore, a new actuator having high sensitivity is required. Bimorph PZT, which has fast access time and high sensitivity characteristic, is suitable for this precise actuating system. This paper is focused on derivation of mathematical model of dual bimorph PZT actuator and control algorithm. Hamilton's principle was used for mathematical model. The model is verified by FEA(Finite Element Analysis), and compared with experimental results. Different control algorithms were used f3r two bimorph PZT actuating same direction and opposite direction. The gap between recording media and optical head was controlled within 20nm in experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.842-845
• /
• 2000

It is essential to reduce stiction between the slider and the disk for super-smooth media such as glass disk for high density recording. We developed a stiction-reduced slider by fabricating mechanical bumps on the air bearing surface of the slider by indentation technique. This paper presents a possibility and concept of Stiction-Free-Slider which can operate on the data zone of a magnetic disk. The slider hat many bumps and their heights are in the tens of nm range. The SFS shows good performance on the data zone. Moreover, little wear of the bumps was observed when the preload was small.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1997.10a
• /
• pp.45-50
• /
• 1997

In recent years the recording density of hard disk has been increasing largely due to the decreasing flying height of head. However, as the flying height is decreased the reliability issue becomes ever more critical. This is because the reliability and durability of hard disk is related to the head/disk interaction as the two components come into partial or full contact. In this work characteristics of friction and stiction in head/disk interface was investigated using constant speed drag test and CSS(contact-start-stop) test. The purpose of this research is to identify the frictional properties of head/disk interface

• Proceedings of the KWS Conference
• /
• 2006.05a
• /
• pp.148-150
• /
• 2006

In this paper, the applicability of an UET(ultrasound excited thermography) for a defect detection of the welded receptacle is described. An UET(ultrasound excited thermography) is a defect-selective and fast imaging tool for damage detection. A high power ultrasound-excited vibration energy with pulse durations of 280ms is injected into the outer surface of the welded receptacle made of Al material. An ultrasound vibration energy sent into the welded receptacle propagate inside the sample until they are converted into the heat in the vicinity of the defect. The injection of the ultrasound excited vibration energy results in heat generation so that the defect is turned into a local thermal wave transmitter. Its local heat emission is monitored by the thermal infrared camera. And they are processed by the image recording system. Measurement was performed on aluminum receptacle welded by using Nd:YAG laser. The observed thermal image revealed two area of defects along the welded seam.

• Proceedings of the IEEK Conference
• /
• 2000.06e
• /
• pp.121-123
• /
• 2000

Changes in breathing pattern and apnea both can be !he result of sleep disorders. The focus of this paper is to develop methodologies to monitor the breathing pattern and to detect apnea. An accurate recording of the respiratory phase can be carried out with different methods. One of these methods is the use of a thermocouple, which reacts to the variation in air temperature, placed in the nose and mouth of the patient. The K-type thermocouple was used because it has high reliability, thermo-stability, and good corrosion resistance. And also, it has a considerable long time constant that gives a low cut-off frequency, well below the respiratory frequency and thereby causing a large phase difference. The result showed that timing of respiration was accurately obtained with the AD595, amplifier for K-type thermocouple.