• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.310-314
• /
• 2010

Track geometry changes by traffic loads. The bigger the changes are, the worse the riding comfort and running stability of train. This is so-called track irregularity and is the most important quality parameters of ballasted track. To objectively assess track irregularity, track geometry should be able to be measured. Practically, railway companies in Korea use normal distribution as probability distribution of track irregularity. But some countries use non-normal distribution according to their own track recording system. In this report, reviewed probability distribution of Kyung-Bu high-speed line and tested normality.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.963-966
• /
• 2003

방송 환경이 디지털화되면서 기존 방송 단말에서 지원하던 방송 프로그램 녹화 기능이 새로운 저작권 문제를 불러일으키고 있다. 그러나 방송 단말에 저장되는 방송 콘텐츠를 위한 적절한 보호방안이 마련된다면, 이러한 콘텐츠를 이용한 새로운 비즈니스 모델을 창출해 낼 수 있다. 본 논문에서는 방송 단말에 저장된 콘텐츠를 효과적으로 보호하고 이를 이용한 콘텐츠 유통을 지원할 수 있으며 기존의 방송 서비스 환경에 쉽게 적용될 수 있는 디지털 콘텐츠 보호 방법에 대하여 논한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.664-669
• /
• 2003

Recently, the recording density of hard disk drives has improved at an annual percentage rate of 100%. Therefore for faster access, higher disk rotational speeds will be required. The influence of the airflow produced by the rotation of a disk on the positioning accuracy has become a serious topic of research and the aerodynamic aspect of hard disk drives is now quite considerable with the increases in recording density and higher rotational speeds. Unsteady airflow in an actual hard disk drive is numerically simulated by using LES(Large Eddy Simulation) technique, we could predicted and aerodynamic mechanism that was related actuators' surroundings in HDD. At a result, with modifying the various shapes of the E-block and Damper, we estimated the characteristic of the influence of airflow in HDDs.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.550-552
• /
• 2003

We prepared $Co_{77}Cr_{20}Ta_3$ Magnetic layer for perpendicular magnetic recording media with introduce Two-step methode and Amorphous Si Underlayer on slide glass substrate. The thickness of magnetic layer were 100nm, and Underlayer were varied from 5 to 100 nm. The multi layer Properties of crystal structure were examined with XRD. Prepared thin films showed improvement of dispersion angle of c-axis orientation ${\Delta}{\theta}_{50}$ caused by inserting Buffer-layer and amorphous Si underlayer.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.31-34
• /
• 1997

A semiconductor microelectrode array has been successfully used in obtaining single unit recordings from medial giant nerve of clay fish, rat saphenous nerve and abdominal ganglia of aplysia. The recording device fabricated using silicon microfabrication techniques is a depth-probe type and, previously, has been mostly used to record from central nerve system of vertebrates. From invertebrates, and also from peripheral nerves of vertebrates, however, the quality of the recorded signal depends heavily on the recording conditions, such as the proximity of the electrode site to the nerve cells and the size of the neuron. We have modeled the signal to noise ratio as unctions of these parameters and compared the experimental data with the calculated values thus obtained.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.183-184
• /
• 1998

Respiration monitoring is important in many clinical situations due to its relationship to vitality. But present commercial monitoring systems are bulky and expensive, so they are inadequate to be used for long term recording or out-patients application. We have developed a low cost, low power, handhold respiration monitoring system based on airflow measurement. Respiration flow is indirectly detected using a thermister or a themocouple sensor. Real time recording of respiration rate, abnormality detection and apnea alarming are available.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.71-77
• /
• 2002

The spectrum of impulse response signal which is obtained from an impulse hammer testing is used for frequency response function, nevertheless it has serious faults when the record length for the signal processing is not very long. The faults cannot be avoided with the conventional signal analyzer that is processing all the signals as if they are always periodic. The signals generated by the impact hammer are undoubtedly non-periodic because of the damping, and are acquired for limited recording time due to the memory as well as the computation performance of the signal analyzer. This paper will make clear the relation between the faults and the length of recording time, and propose the way for solving the faults.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.160-165
• /
• 2002

The flying height of contact slider is determined by vertical and pitching motions. This paper performed the computer simulation for flying height change of contact slider. It is changed by many parameters, contact stiffness. contact damping, all bearing stiffness ratio and so on. So computer simulation analysis is performed for knowing for what change of these parameters influences in flying height of contact slider. The practical recording zone surface is gotten by using SPM. In recording zone, flying height is simulated for each parameter. the settling time which the flying height of contact slider is lower than 10nm is analyzed over practical disk surface for changing each parameter. Through these results, the contact slider can be analyzed for more accuracy dynamic characteristics.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.175-180
• /
• 2002

Loading/Unloading(L/UL) mechanism has been considered to be an alternative to contact start-stop(CSS) mechanism which eliminates stiction and wear associated with frequent start and stop process. It has other advantages including increased areal density due to lower flying height, reduced power consumption, and improved shock resistance. In order for L/UL to be Implemented in Near-field recording system properly, dynamics of optical flying head must be understood and optimized. In this paper the dynamic characteristics during loading process is analyzed numerically to investigate the effect of design parameters such as loading speed. slider shape, and initia conditions on the dynamic reponses of flying head..

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.843-844
• /
• 2006

자기 기록 시스템이 더 높은 기록 밀도를 가지려면 기록 미디어에 더 작은 공간을 가지는 비트를 기록할 수 있어야 한다. 이를 가능하게 하기 위해서는 더 작은 비트를 보존 할 수 있는 고 보자력 기록 미디어와 이를 기록할 수 있는 자기 기록 헤드가 있어야 한다. 자기 기록 시스템에서 기록 밀도와 함께 중요시 되는 것이 바로 기록 속도이다. 시스템이 발전 할 수록 요구되는 속도 또한 높아지고 있다. 기록 속도가 빨라지려면 기록 주파수가 높아지고 기록 미디어의 회전 속도가 빨라져야 한다. 자기 기록 헤드는 자화되어 있는 고 보자력 기록 미디어 위를 빠른 속도로 직선 운동하고 있는 형태가 되고 이로 인하여 자기 기록 헤드에 와전류가 발생하게 된다. 발생되는 와전류의 형태는 기록 미디어에 자화된 형태에 따라 달라질 것이고 또한 자기 기록 미디어의 회전 속도와 와전류가 발생되는 기록 헤드의 전기전도도에 따라 변화 된다. 본 연구는 이렇게 발생된 와전류를 3차원 유한요소법을 이용하여 분석한 수 이 와전류가 기록 필드에 미치는 영향을 분석하여 제시 하였다.