• Archives of Plastic Surgery
• /
• 제44권1호
• /
• pp.19-25
• /
• 2017

Background Numerous condylar repositioning methods have been reported. However, most of them are 2-dimensional or are complex procedures that require a longer operation time and a highly trained surgeon. This study aims to introduce a new technique using a condylar repositioning plate and a centric relation splint to achieve a centric relationship. Methods We evaluated 387 patients who had undergone surgery for skeletal jaw deformities. During the operation, a centric relation splint, intermediate splint, final centric occlusion splint, and condylar repositioning plate along with an L-type mini-plate for LeFort I osteotomy or a bicortical screw for bilateral sagittal split ramus osteotomy were utilized for rigid fixation. The evaluation included: a physical examination to detect preoperative and postoperative temporomandibular joint dysfunction, 3-dimensional computed tomography and oblique transcranial temporomandibular joint radiography to measure 3-dimensional condylar head movement, and posteroanterior and lateral cephalometric radiography to measure the preoperative and postoperative movement of the bony segment and relapse rate. Results A 0.3% relapse rate was observed in the coronal plane, and a 2.8% relapse rate in the sagittal plane, which is indistinguishable from the dental relapse rate in orthodontic treatment. The condylar repositioning plate could not fully prevent movement of the condylar head, but the relapse rate was minimal, implying that the movement of the condylar head was within tolerable limits. Conclusions Our condylar repositioning method using a centric relation splint and miniplate in orthognathic surgery was found to be simple and effective for patients suffering from skeletal jaw deformities.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권3호
• /
• pp.231-233
• /
• 2002

Temporary reconstruction of the mandibular continuity defect resulting from the ablative tumor surgery with a reconstruction plate can be used for the preservation of normal facial contour and oral function and for periodic follow up of recurrence. Reconstruction plates are adapted to the bone before the resection and provisionally fixated with some screws. Accurate contouring and adaptation are very important for the prevention of displacement of bony stumps and decubituous skin ulcer. However, if there is large expanding buccal tumor mass in mandible, it is very difficult or even impossible to contour the plate before resection. I, therefore, introduce the reconstruction plate application technique using a simple condylar repositioning miniplate after segmental mandibular resection.

• 대한치과교정학회지
• /
• 제43권2호
• /
• pp.74-82
• /
• 2013

Objective: The purpose of this study was to evaluate displacement of the mandibular condyle after orthognathic surgery using a condylar-repositioning device. Methods: The patient group comprised 20 adults who underwent bimaxillary surgery between August 2008 and July 2011. The degree of condylar displacement was measured by pre- and postoperative tomographic analysis using centric relation bite and a wire during surgery. A sur vey assessing temporomandibular joint (TMJ) sound, pain, and locking was performed. The 20 tomographs and surveys were analyzed using the Wilcoxon signed-rank test and McNemar's test, respectively. Results: No significant changes were observed in the anterior, superior, or posterior joint space of the TMJ (p > 0.05). In addition, no significant change was observed in TMJ sound (p > 0.05). However, TMJ pain and locking both decreased significantly after surgery (p < 0.05). Conclusions: Due to its simplicity, this method may be fea sible and useful for repositioning condyles.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제40권
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제39권
• /
• pp.16.1-16.6
• /
• 2017

Background: Mandibular reconstruction is performed after segmental mandibulectomy, and precise repositioning of the condylar head in the temporomandibular fossa is essential for maintaining preoperative occlusion. Methods: In cases without involvement of soft tissue around the mandibular bone, the autopolymer resin in a soft state is pressed against the lower border of the mandible and buccal and lingual sides of the 3D model on the excised side. After hardening, it is shaved with a carbide bar to make the proximal and distal parts parallel to the resected surface in order to determine the direction of mandibular resection. On the other hand, in cases that require resection of soft tissue around the mandible such as cases of a malignant tumor, right and left mandibular rami of the 3D model are connected with the autopolymer resin to keep the preoperative position between proximal and distal segments before surgical simulation. The device is made to fit the lower border of the anterior mandible and the posterior border of the mandibular ramus. The device has a U-shaped handle so that adaptation of the device will not interfere with the soft tissue to be removed and has holes to be fixed on the mandible with screws. Results: We successfully performed the planned accurate segmental mandibulectomy and the precise repositioning of the condylar head by the device. Conclusions: The present technique and device that we developed proved to be simple and useful for restoring the preoperative condylar head positioning in the temporomandibular fossa and the precise resection of the mandible.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권1호
• /
• pp.29-34
• /
• 1999

Special attention should be directed toward the preservation of preoperative condylar position during orthognathic surgery because their positional change may leads to postoperative skeletal relapse as well as TM joint problem. Various condylar positioning devices, therefore, have been introduced and utilized in orthognathic surgery. Even though most of them provided us with improvement of surgical results, we also found some problems including limited indication, etc. For more accurately repositioning the maxilla and the mandible and its wide versatility, a newly designed maxilla and condylar positioning device based on the fixed part of cranium is introduced.

• The Journal of Advanced Prosthodontics
• /
• 제3권1호
• /
• pp.51-55
• /
• 2011

BACKGROUND. Mandibular displacement is a common complication of condylar fracture. In the mandibular displacement due to condylar fracture, it is difficult to restore both esthetics and function without using orthognathic surgery. CASE DESCRIPTION. This clinical report described a full mouth rehabilitation in the patient with bilateral condylar fractures and displaced mandible using bilateral sagittal split ramus osteotomy (BSSRO) and simultaneous dental implant surgery. Mandibular position was determined by model surgery through the diagnostic wax up and restoration of fractured teeth. The precise amount of the mandibular shift can be obtained from the ideal intercuspation of remaining teeth. CLINICAL IMPLICATION. Mandibular displacement by both condylar fractures can be successfully treated by orthognathic surgery. Determination of occlusal plane and visualization from diagnostic wax up are mandatory for mandibular repositioning of model surgery. Stable occlusion and regular recall check up are needed for long-term outcome.

• 대한치과보철학회지
• /
• 제24권1호
• /
• pp.141-150
• /
• 1986

This study conducted 2 types of occlusal splint therapy to eliminate clicking sound. 15 patients who had clicking on their joints were selected, and divided, at random, into 3 groups. In the first group, 4 persons put on stabilization splint and in the second group, 6 persons put on anterior repositioning splint which had made condyle to protrude 3mm, and in the last group, 5 persons put on anterior repositioning splint which had made condyle to protrude 6mm. Patients who wore anterior repositioning splint were instructed to use the splint for all days. The evaluation of clicking was measured by occlusal soundscope. The clicking was converted to aucostic signal by the attached microphone, instead of vibrating sensor The in-put aucostic signal on the occlusal soundscope made it possible to observe the experiment's result. Anterior repositioning splint was produced in the centric occlusion state, when the model was mounted to articulator and inserted two pieces of 3mm and 6mm resin blocks each into the rear wall of articulator fossa. The observation of the patients who wore three different splints for 3 weeks has reached the following conclusions: 1. Stabilization splint produced no effect in eliminating the clicking sound. 2. Anterior repositioning splint therapy with 3mm condylar protrusion produced significant improvement in eliminating the clicking sound. 3. The 6mm protruded anterior repositioning splint caused pain on affected TMJ area as well as the clicking on unaffected joint.

• Restorative Dentistry and Endodontics
• /
• 제37권2호
• /
• pp.110-113
• /
• 2012

본 증례의 편측성 하악 과두 골절 환자는 외상 후 1개월간 다수의 상악 전치부 치아 외상이 간과되어 교합이 붕괴된 상태로 내원하였다. 변위된 상악 전치부 치아들의 외과적 정복 후 지속적인 기능 운동을 진행하여, 10개월 후 정상 교합 및 하악 과두 골절부의 골유합이 확인되는 양호한 결과를 얻을 수 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권4호
• /
• pp.411-419
• /
• 2000

Purpose: This study was aimed at analysis of the changes in the condyle position in subjects with mandibular setback osteotomies Method: Twenty patients were evaluated retrospectively for their changes in the condyle position who underwent surgical mandibular setback using bilateral sagittal split osteotomies with a manual condyle repositioning technique and rigid fixation. The cephalometric and panoramic analysis was performed preoperatively, 1 week, 6 months, and 1 year postoperatively. And postoperative noise, temporomandibular joint pain, and mouth opening were clinically examined 2 months, 4 months, 6 months, 8 months, 10 months, and 12 months postoperatively. Result: The condyles rotated posteriorly and laterally immediately after surgery, and they returned to the preoperative position during follow-up period but it is not significant. The statistical analysis (Paired t-test) showed no significant effects in postsurgical stability. The changes in the condyle position didn't have a significant harmful influence on temporomandibular joint disorder. Conclusion: A careful surgical mandibular setback using manual condyle repositioning and fixation technique will move condyle minimally and that will decrease the relapse and temporomandibular joint disorder.