• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.4.1-4.4
• /
• 2018

Background: Along with the advances in technology of three-dimensional (3D) printer, it became a possible to make more precise patient-specific 3D model in the various fields including oral and maxillofacial surgery. When creating 3D models of the mandible and maxilla, it is easier to make a single unit with a fused temporomandibular joint, though this results in poor operability of the model. However, while models created with a separate mandible and maxilla have operability, it can be difficult to fully restore the position of the condylar after simulation. The purpose of this study is to introduce and asses the novel condylar repositioning method in 3D model preoperational simulation. Methods: Our novel condylar repositioning method is simple to apply two irregularities in 3D models. Three oral surgeons measured and evaluated one linear distance and two angles in 3D models. Results: This study included two patients who underwent sagittal split ramus osteotomy (SSRO) and two benign tumor patients who underwent segmental mandibulectomy and immediate reconstruction. For each SSRO case, the mandibular condyles were designed to be convex and the glenoid cavities were designed to be concave. For the benign tumor cases, the margins on the resection side, including the joint portions, were designed to be convex, and the resection margin was designed to be concave. The distance from the mandibular ramus to the tip of the maxillary canine, the angle created by joining the inferior edge of the orbit to the tip of the maxillary canine and the ramus, the angle created by the lines from the base of the mentum to the endpoint of the condyle, and the angle between the most lateral point of the condyle and the most medial point of the condyle were measured before and after simulations. Near-complete matches were observed for all items measured before and after model simulations of surgery in all jaw deformity and reconstruction cases. Conclusions: We demonstrated that 3D models manufactured using our method can be applied to simulations and fully restore the position of the condyle without the need for special devices.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.17 no.2
• /
• pp.113-123
• /
• 2001

The success of complete denture prosthesis is to satisfy three basic requirements for the edentulous patient : maximum comfort, efficiency, and esthetic appearance. This can be achieved only if the dentures are both stable and retentive. When the residual alveolar ridge has resorbed significantly, stability and retention are more dependent on the correct position of the teeth and external surfaces of the denture. The stability and retention of the denture can be improved by locating the denture in the neutral zone and reproducing exact mandibular border movement for balanced occlusion. The neutral zone philosophy is based upon the concept that there exists a specific area where the musculature function will not unseat the denture in the mouth. In here, forces generated by the tongue are neutralized by the forces generated by the lips and cheeks. One of the simplest methods for recording border movements in three dimensions is to make stereographic record of condylar movement. Stereographs are made in the mouth during mandibular movement with intraoral clutches and central bearing point, and used in dictating the condylar movement on the articulator later by generating the condylar paths in doughy acrylic resin. Its procedure is simpler and more convenient than that of Pantograph. In this clinical report, we introduce the concept of neutral zone and stereograph in complete denture fabrication.

• The korean journal of orthodontics
• /
• v.32 no.5 s.94
• /
• pp.313-325
• /
• 2002

Three-dimensional CT imaging is efficient in examining specific structures in the craniofacial area by reproducing actual measurements through minimization of errors from patient movement and image magnification. Due to the rapid development of digital image technology and the expansion of treatment range a need for developing three -dimensional analysis has become urgent. Therefore the purpose of this study was to evaluate the percentage of error and magnification of three-dimensional CT using a dried skull and Vworks $program^{TM}$ (Cybermed Inc., Seoul, Korea) and also to obtain landmarks that are easy to designate and reproduce in three-dimensional images using the Vmorph-proto $program^{TM}$ (Cybermed Inc., Seoul, Korea). The following conclusions were obtained, 1. In the comparison of actual measurements from the dried skull and the three-dimensional image obtained from the Vworks program, the mean error was 0.99mm and the magnification was 1.04%. 2. Clinically useful hard tissue landmarks from three-dimensional images were Supraorbitale, Lateral orbital margin, Infraorbitale, Nasion, ANS, A point, Zygomaticomaxilla, Upper incisor, Lower incisor, B point, pogonion, Menton, PNS, Condylar inner margin, Condylar outer margin, Porion, Condylion, Gonionl, Gonion2, Gonion3, Sigmoid notch and Basion. 3. Clinically useful soft tissue landmarks from three-dimensional images were Endocanthion, Exocanthion, Soft tissue Nasion, Pronasale, Alare lateralis, Upper nostril point, Lower nostril point, Subnasale, Upper lip point, Cheilion, Stomion, Lower lip center, Soft tissue B, Pogonion, Menton and Preaurale. The Vworks program can be considered a clinically efficient tool to produce and measure three-dimensional images. Most of the hard and soft tissue landmarks proposed above are anatomically important points which are also easily reproducible and designated. These landmarks can be beneficial in three-dimensional diagnosis and the prediction of changes before and after surgery.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.34 no.2
• /
• pp.100-105
• /
• 2012

Purpose: In general, the surgical treatment for mandibular retrognathism is represented by two methods, distraction osteogenesis (DO) and mandibular osteotomy surgery. The DO is mostly preferred when the degree of advancement of mandible is large. However, the postoperative stability of mandibular advancement using DO have not been actively investigated. Therefore, in the present study we have compared the postoperative stability between DO and bilateral sagittal split ramus osteotomy (BSSRO) in mandibular retrognathism. Methods: Seven patients who had been treated by DO and thirteen patients with BSSRO were included in this study. Serial lateral cephalograms were analyzed by manual tracing and the amount of the mandibular elongation was measured. To evaluate the postoperative stability, positional changes of the condylar position and B point were analyzed. Results: Mean amount of mandibular advancement was $6.51{\pm}3.57mm$ for BSSRO group and $12.43{\pm}4.35mm$ for DO group, respectively. There was no significant difference in age between the two groups (P>0.05). Mean follow up periods were 10.77 months for BSSRO group and 11.28 months for DO group, respectively. After mandibular advancement, mean positional changes in the condyle were $0.56{\pm}1.43mm$ horizontally and $0.72{\pm}1.61mm$ vertically for BSSRO group and $0.53{\pm}1.56mm$ horizontally and $0.56{\pm}1.75mm$ vertically for DO group, respectively. Mean change of distance from B point to Y-axis was $-1.76{\pm}0.83mm$ for BSSRO group and $-2.14{\pm}1.82mm$ for DO group, respectively. According to the condylar position and B point, there were no significant differences in postoperative stability between the two groups (P>0.05). Conclusion: There was no significant difference in postoperative stability between DO and BSSRO group according to condylar position and B point. Based on the results of the present study, it is hypothesized that DO would be a good treatment choice for severe mandibular retrognathism because DO could achieve more mandibular advancement and concurrent soft tissue elongation.

• Journal of the Korean Arthroscopy Society
• /
• v.7 no.2
• /
• pp.215-219
• /
• 2003

Purpose : To report the 'condylar cut-off sign', a new radiographic sign in knees with discoid lateral meniscus and to report the sensitivity, specificity, positive predictive value and negative predictive value of the sign to elucidate the diagnostic significance of the sign for discoid meniscus. Materials and Methods : Fifty knees with complete discoid lateral meniscus and fifty normal knees formed the basis of this study. All of them were arthroscopically confirmed fer the discoid or normal lateral meniscus. The authors developed a method to measure the length of the medial and lateral condylar were compare and analyzed. Results : Tile average ratio was 0.716 in the discoid meniscus group, and 0.902 in the normal group. The stastistical analysis by the T-test revealed the t-value -11.13(p<0.0001). Stastistical analysis by chi-square test using cut point 0.8, also showed significant difference between the two groups, with $76\%$ sensitivity, $100\%$ specificity, $100\%$ positive predictive predictive value and $81\%$ negative predictive value. The 'condylar cut-off sign' was readily detectable in all cases of discoid lateral meniscus, suggesting that the cut off sign could serve as a simple and reliable radiographic sign fur the diagnosis of discoid meniscus. Conclusion : The condylar cut-off sign on the Tunnel view of simple radiography of the knee can serve as a good sign for the diagnosis of discoid lateral meniscus, with $100\%$ positive predictive value.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.10 no.1
• /
• pp.47-55
• /
• 1980

The author analysed the routine radiographic changes and clinical symptoms of 205 cases of temporomandibular joint arthrosis. The clinical symptoms of the patients were classified and the morphological ylar head, articular eminence, and articular fossa were analized and discussed view point. The positional changes of condylar head and articular fossa relatation in TMJ arthrosis were observed. The frequencies of coincidence between the site of complaints and the site of the abnormal images which could be detected were examined. The results were obtained as follows; 1. Bone erosion, deformity, marginal proliferation and sclerosis were selected from many abnormal images as the radiographic diagnostic criteria of TMJ arthrotic lesions. 2. Abnormal radiographic findings were revealed in 150 cases (73.9%) of 205 total TMJ arthrosis cases and site with abnormal findings coincided with the site of complaints in 106 cases (70.7%) of 150 cases and coincidence rates were higher above fourth decades than below third decades. 3. Sclerosis of the abnormal radiographic findings could be found more often below third decades than above fourth decades. 4. The positional changes of condylar head were revealed in 176 cases (85.9%) of 205 total cases. 5. Pain complaints were revealed in 170 cases(82.9%) and clicking sounds were revealed in 120 cases (58.6%) of clinical symptoms of TMJ arthrosis. 6. No tendency was found so far the differential diagnosis between pain dysfunction syndrom and osteoarthrosis of TMJ.

• The Journal of Korean Academy of Prosthodontics
• /
• v.23 no.1
• /
• pp.137-144
• /
• 1985

This study was designed to investigate the side shift of orbiting condylar movement by direct measurements from tracings of Denar pantograph. It is well known that side shift has much influence on the articulating surface of teeth. In this study, after locating the ture hinge axis point with Denar hinge axis locatior, the recordings of Mandibular movement were obtained from Denar pantographic recording assembly, and immediate side shift and progressive side shift were measured. For this study, 20 dental studnts who have no missing teeth and no difficulties of mandibular movement and 4 patients who were, treated by occlusal therapy were selected. The results obtained were as follows, 1. The prevalence of immediate side shift was 42%, and the immediate side shift of greater than 0.5mm was only 17%. 2. The mean of immediate side shift (20 of 48) was 0.38mm, that of right lateral excursion (7 of 24) was 0.27mm, and that of left lateral excursion (13 of 24) was 0.44mm. 3. The mean of progressive side shift was $7.21^{\circ}$ that of right lateral excursion was $6.46^{\circ}$, and that of left lateral excursion was $7.96^{\circ}$.

• Journal of Korean Academy of Oral and Maxillofacial Radiology
• /
• v.23 no.2
• /
• pp.373-378
• /
• 1993

Although osteochondroma is not rare in the axial skeleton and long bones, it is very rare in the jaw. It is a benign chondroma within which partial endochondral ossification occurs. There are two types, the central one and the peripheral one. Peripheral type is more common than central one in the jaw, but it is not frequent. Especially it is rare at the mandibular condyle. When it occurred at the mandibular condyle, it is generally located at the lateral portion of the condyle. In that case, facial asymmetry with occlusal change is the characteristic clinical feature. But it is similar to condylar hyperplasia so that misdiagnosis can sometimes occur. The differential point is as follows: Hyperplasia generally appears as a generalized enlargement of the condylar process with a normal cortical thickness, but osteochondroma usually appears as a focal growth or mass. We report a very rare case of peripheral osteochondroma at the mandibular condyle in a 27-year- old male patient who visited DKUDH with a chief complaint of the facial asymmetry.

• The korean journal of orthodontics
• /
• v.41 no.2
• /
• pp.87-97
• /
• 2011

Objective: Facial asymmetry is usually evaluated from the difference in length and angulation of the maxilla and mandible. However, asymmetric position or shape of the condyle can also affect the expression of asymmetry. The purpose of this study was to evaluate the correlation between condylar asymmetry and chin point deviation in facial asymmetry. Methods: Cone-beam CT images of fifty adult skeletal Class III patients were studied. Thirty patients who had more than 4 mm menton deviation were categorized in the asymmetric group. Twenty patients with less than 4 mm menton deviation were assigned to the symmetric group. Anteroposterior and transverse condyle positions were evaluated from the cranial base. The greatest mediolateral diameter (GMD) of the condyle in the axial plane and angulation to the coronal plane were measured. The height and volume of the condyles were evaluated. Results: The symmetric group had no statistical difference between both condyles in position, angulation, GMD, height and volume. In the asymmetric group, the non-deviated side condyle was larger in GMD, height and volume than the deviated side. There was no statistical difference in condyle position and angulation. The GMD, height difference and condylar volume ratio (non-deviated/deviated) were positively correlated with chin deviation. From the linear regression analysis, condylar volume ratio was a significant factor affecting chin deviation. Conclusions: These findings suggests that the non-deviated side condyle is larger than the deviated side. In addition, condylar asymmetry can affect the expression of facial asymmetry.

• Journal of Oral Medicine and Pain
• /
• v.25 no.2
• /
• pp.205-214
• /
• 2000

This study was performed to investigate the relationship between mandibular midline shift and anteroposterior first molar occlusal relation, and their effects on the mandibular height and the occlusal plane angle. For this study, 49 patients with temporomandibular disorders were selected. They did not show facial asymmetry and their facial midline coincide with maxillary dental midline. Upper and lower mandibular impression were taken and the casts were fabricated. Amount and direction of the mandibular midline shift and the anteroposterior shift between the two occluding first molars were measured on the casts. Several items related to height such as mandibular height from top of the articular surface of the condyle to curve changing point between antegonial notch and mandibular angle, condylar height which was the vertical distance from the articular surface to retroepicondyle of the condyle, and sigmoid height from the deepest point of sigmoid notch to the curve changing point and the occlusal plane angle were also measured on the panoramic and on the transcranial radiographs. Correlation between midline shift and anteroposterior first molar relation and comparison between right and left mandibular height by the midline shift and the first molar relation were analysed by SPSS windows program. The results of this study were as follows : 1. Mean amount of midline shift in the subjects with midline shift were 2.0mm for both side, respectively. The first molar relation of the ipsilateral side of midline shift showed Angle class II tendency and the contralateral side showed Angle class III tendency, which meant drift of the dentition to the side of the midline shift. 2. The occlusal plane angle on the panoramic radiograph were $13.0^{\circ}$ in right, and $12.5^{\circ}$ in left side, and their were no correlation between occlusal plane angle and mandibular midline shift and the first molar occlusal relation. 3. Angle's classification for both sides of the first molar relation were same in about half of all the subjects. Amount of deviation from class I first molar relation, however, were decreased in the contralateral side of observed side. 4. Mandibular height of the ipsilateral side to which mandibular midline shift showed tendency of lower than that of the contralateral side, and there was a tendency that the height was higher in class III subjects, then class II subjects, and lower in class I subjects. However, condylar height did not show any difference in the subjects with midline shift and also show no difference by the first molar occlusal relation.