• 대한치과보철학회지
• /
• 제29권2호
• /
• pp.295-317
• /
• 1991

The discrepancy between centric relation and centric occlusion have a great role on the successful prosthodontic and occlusal treatment. This study was performed to investigate the effect of the discrepancy between centric relation and centric occlusion on condylar guidance inclination and Bennett shift (immediate and progressive side shift). Sixteen adults who have physiologically normal occlusion and are free of TMJ dysfunction were selected. The amount of the sagittal CR-CO discrepancy in lower anterior incisor was obtained by Saphon Visi-Trainer. The amount of the CR-CO discrepancy in condylar level was measured on the individualized corrected tomography. Pantronic survey was performed by using a arbitrary hinge axis according to manufacturer's direction. All subjects were divided into two groups, group I (small) and group II (large), according to the amount of CR-CO discrepancy. At first the amount of the CR-CO discrepancy in condylar level between two groups was compared and then the condylar guidance inclination and Bennett shift between two groups were compared and analyzed. The results were as follows; 1. The average CR-CO discrepancy in lower anterior incisors was 0.7mm superoinferiorly, 0.49mm anteroposteriorly, and 0.88 mm in total. The average CR-CO discrepancy in condylar level was 0.43mm. 2. The CR-CO discrepancy measured on teeth level and condylar level were highly correlated (p<0.01). 3. The correlation of the condylar position in the glenoid fossa between two groups was not statistically significant. 4. The large CR-CO discrepancy group showed greater amount of Bennett shift and condylar guidance inclination, but there is no statistical significancy. 5. It seems that the CR-CO discrepancy have greater effect on progressive side shift than other elements of mandibular movements.

• 치과방사선
• /
• 제22권1호
• /
• pp.109-116
• /
• 1992

저자는 경북대학교 치과대학 학생중 악관절의 기능장애의 병력 및 현증이 없고 안모가 단정한 정상인 56명을 대상으로 시상정중면에서 양측의 하악우각부사이의 각도와 하악과두장축의 수평경사도를 계측하여 통계학적으로 분석한 바 다음과 같은 결과를 얻었다. 1. 시상정중면에서 하악우각부 사이의 각도는 우측이 18.50±1.48°, 좌측이 19.30±1.55°였다. 2. 하악과두장축의 수평경사도는 우측이 19.25±7.56°, 좌측이 20.27±7.05°였다. 3. 두 각도간의 관계는 우측의 경우 y=20. 31-0.0094×(r=-0 482, p<0.01), 좌측의 경우 y=20.64-0.066×(r=-0.301, p<0.05)인 것으로 나타났다(y : 하악과두장축의 수평경사도, x : 시상정중면에서 하악우각부 사이의 각도).

• 대한치과보철학회지
• /
• 제29권3호
• /
• pp.43-53
• /
• 1991

It is important to harmonize the occlusion with TMJ and neuromuscular system. However, clinically, how to harmonize is very difficult. The mandibular movement is the motion in which all component part of stomatognathic system participate. This study was performed to compare mandibular movement of mandibular prognathic patients group with that of normal group, to ascertain which components of mandibular movement have differences between two groups, and to use for occlusal treatment of mandibular movement. Thirteen adult who have physiologically normal occlusion and are free of TMJ dysfunction were selected as a control group(Group 1). Eight adult who are mandibular prognathic patient and have more than four anterior teeth crossbite, therefore have not anterior guidance function and have posterior interference at protrusion were selected as a experimental group(Group 2). Electronic pantograph, Denar Pantronic (Denar Corp., U.SA.), was used to record mandibular movement. Pantronic survey was performed by using an arbitrary hinge axis according to manufacturer's direction. Of the Pantronic recordings, immediate side shift (ISS), progressive side shift (PSS), orbiting condylar path (ORB), protrusive condylar path (PRO) between two groups were compared and analysed. The results were as follows: 1. The average protrusive and orbiting condylar inclination of mandibular prognathic patient$(28.44^{\circ},\;36.94^{\circ})$ was significantly lower than those of normal group$(40.15^{\circ},\;48.00^{\circ})$ (P<0.01). 2. There was no statistically significant difference between .the average immediate and progressive side shift of mandibular prognathic patient $(0.37mm,\;6.19^{\circ})$ and those of normal group$(0.52mm.\;5.96^{\circ})$ (P>0.01). 3. The significant correlation was found between orbiting condylar inclination and protrusive condylar inclination.

• 치과방사선
• /
• 제18권1호
• /
• pp.167-176
• /
• 1988

This study was designed to evaluate the morphology of the temporomandibular joint components and dentofacial characteristics of patients with clicking and painful temporomadibular joint. The materials consisted of 80 conventional pantomographs in normal an symptomatic individuals aged 18-23 and divided into 2 groups by symptom of temporomandibular joint. The results were as follows; 1. In morphologic analysis of condylar head, type Ⅰ (anterior, posterior smooth curve) was most dominant in both group(58.75%, 55.0%) and asymmetrical condylar shape was predominant in symptomatic group (18 cases, 45%). 2. In symptomatic group, the condylar width were slightly lesser and the ratio of condylar height to height of condyle-ramus were larger than those of normal group. 3. Vertical overlap of central incisor of symptomatic group was slightly larger than that of normal group. There was significant differences between each group in mandibular midline deviation. 4. The symptomatic group tended to steep mandibular plane angle and the degree of condylar path and condylar axis of normal group were larger than those of symptomatic group. 5. The condylar width was inversely correlated with inclination of condylar path and inclination of condylar path was correlated with condylar axis in both groups.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.7-24
• /
• 1988

The stable occlusion in function is thought as important as the esthetics in form, in order to preserve the healthy oral condition. The stable occlusion requires the harmony between the condylar guidance factors and the anterior guidance factors. The aim of this study was to evaluate the quantitative relationship between the condylar guidance factors and the anterior guidance factors, estimating statistically the measurement of the condylar paths by Pantronic and those of the anterior guidance factors, craniofacial morphology by roentgenocephalometry in 46 relatively good functional occlusion. The results of this study were as follows. 1. The measurements of the protrusive condylar path inclinations were $36.41^{\circ}$ in the right, $35.63^{\circ}$ in the left, $36.28^{\circ}$ in the mean. The measurements of Fisher's angles were $8.17^{\circ}$ in the right, $6.43^{\circ}$ in the left, $6.87^{\circ}$ in the mean. 2. The anterior facial height and the lower anterior facial height made a negative correlation with the protrusive condylar path inclination. 3. The articular eminence angle relative to the artificial articulator plane showed a positive correlation with the maximum protrusive condylar path. 4. SNA and SNB made a negative correlation with the articular eminence angle, and AAP-GoMe, AAP-DcGn, the facial height ratio had a positive correlation with the articular eminence angle. 5. The angulation of maxillary incisor lingual slope, overbite and the ratio of overbite to overiet showed a positive correlation with the articular eminence angle. 6. The angulation of maxillary incisor lingual slope , overbite, and the ratio of overbite to overjet made a positive correlation with the inclination of occlusal plane, functional occlusal plane. 7. Overbite and the ratio of overbite to overjet had a positive correlation with the angulation of maxillary incisor lingual slope. 8. The anterior guidance factors were more influenced by the mean protrusive condylar path inclination and the maximum Fisher's angle, and the regression equations of those were made.

• 대한치과보철학회지
• /
• 제28권2호
• /
• pp.125-146
• /
• 1990

The relationale for recording mandibular movement is to accurately adjust an articulator. Techniques to record mandibular movement include radiographic interpretation, extraoral tracing, and intraoral recording materials. This study was performed to compare the concylar guidance inclination and Bennett shift(immediate & progressive side shift)obtained by using an electronic pantograph, pantograph and wax interocclusal records in Korean. Ten adults who have normal occlusion and are free of TMJ dysfunction were selected and clutches were constructed. At first Pantronic survey was performed three times by using an kinematic hinge axis according to manufacturer's direction. Next pantographic survey was performed three times and the articulator was adjusted with each pantographic recording. And then maxillary cast was attached to the articulator with pantographic as a face-bow and the mandibular cast was mounted to the articulator with centric relation record. Three protrusive, three left lateral and three right lateral wax interocclusal records were taken on the subjects and the articulator was adjusted with each interocclusal record. Protrusive condylar inclination, lateral condylar inclination, immediate side shift and progressive side shift obtained by using electronic pantograph, pantograph and wax interocclusal record were compared and analized. The results were as follows; 1. The average left and right protrusive and orbiting condylar inclination($33.7^{\circ},\;37.1^{\circ},\;40.6^{\circ},\;43.5^{\circ}$) record with Pantronic was significantly greater than that recorded with other methods. 2. The average left and right protrusive and orbiting condylar inclination($24.8^{\circ},\;27.0^{\circ},\;31.4^{\circ},\;32.4^{\circ}$)recorded with wax interocclusal record was less than that of other methods. 3. The average left and right immediate side shift(0.57mm,0.44mm)recorded with wax interocclusal record was greater than that of other methods and the average left rigtht immmediate side shift(0.30mm,0.41mm)recorded with Pantronic was significantly greater than that recorded with pantograph(0.11mm,0.20mm). 4. The average variance of wax interocclusal was signivicantly higher than that of other methods.

• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.281-295
• /
• 1994

It is very important for the ideal restorations of anterior openbite patients to record the mandibular movement and to harmonize mandibular movement with other organs in stomatognathic systems. This study was designed to compare the mandibular movement of anterior openbite patients with that of normal bite(Angle Class I) patients, to ascertain which components of mandibular movement have differences between two groups, and to use for occlusal treatment of mandibular movement. Saphon Visi-trainer Model 3(Tokyo Shizaisha Co. Japan) and Denar Pantronic(Denar Corp.,U.S.A.) were used to record mandibular movement. Pantronic survey was peformed by using an arbitrary hinge axis according to manufacturer's direction. Twenty-eight adult who have physiologically normal occlusion(Angle Class I) and are free of TM dysfunction were selected as a control group(Group 1). Fifteen adult who are anterior openbite patient and have not anterior guidance function and have posterior interference at protrusion were selected as a experimental group(Group 2). The results are as follows : 1. There was no statistically significant difference between the average immediate and progressive side shift of anterior openbite patients(0.54mm, $7.57^{\circ}$) and those of normal group(0.49mm, $5.96^{\circ}$). 2. The average protrusive and orbiting condylar inclination of anterior openbite patient$(30.87^{\circ},\;32.27^{\circ})$ were significantly lower than those of normal group$(36.11^{\circ},\;39.04^{\circ})$ (P<0.05). 3. In the results of Visi-trainer recordings, the mean for the maximum protrusion, the maximum laterotrusion, the angle of laterotrusion and the angle of protrusion in the horizontal trajectory between group 1 and 2 did not differ significantly. 4. The mean for the angle of protrusion, the maximum opening in the frontal trajectory, the ICP-RCP(A-P) distance and the angle of protrusion in the sagittal trajectory differ significantly(P<0.05). 5. The significant correlation was found between orbiting condylar inclination and protrusive condylar inclination.

• 대한치과보철학회지
• /
• 제51권3호
• /
• pp.153-159
• /
• 2013

연구 목적: 근래에 들어 체크바이트 법뿐만 아니라 디지털 센서를 이용하여 하악의 운동을 기록, 분석하여 과로각을 계산하는 방법이 개발되어 사용되어져 오고 있으나 두 방법간의 비교하는 연구는 없었다. 이에 새로운 방법인 ARCUSdigma 2 system을 이용한 방법과 전통적인 방법인 체크바이트 법으로 과로각을 측정하여 두 방법 간의 차이를 비교해 보고자 하였다. 연구 대상 및 방법: 교정치료의 경험이 없고, 제3대구치를 제외한 치아의 결손이 없고, 교합평면의 변화를 수반한 광범위한 수복이 없으며, 악관절 질환이 없는 24세부터 34세 사이의 건강한 젊은 성인 남녀(남 10명, 여 10명)를 대상으로 하여 Camper's plane을 기준으로 하여 ARCUSdigma 2 system과 왁스를 사용한 체크바이트법을 각각 3번씩 측정하였으며 교합기는 KaVo Protar Evo 7 반조절성 교합기를 사용하여 각각의 방법으로 과로경사각을 측정하였다. 두 방법 간의 자료를 SPSS 20을 이용한 Mann-Whitney U Test를 사용하여 통계적으로 분석하였다. 결과: 1. ARCUSdigma 2 system에서 전방시상과로각은 좌우 각각 $26.97^{\circ}({\pm}7.38^{\circ})$, $29.80^{\circ}({\pm}8.19^{\circ})$로 측정되었으며, 측방과로경사각은 $5.75^{\circ}({\pm}3.47^{\circ})$와 $8.10^{\circ}({\pm}4.98^{\circ})$로 측정되었다. 2. 체크바이트법에서 전방시상과로각은 좌우 각각 $25.20^{\circ}({\pm}6.53^{\circ})$, $28.18^{\circ}({\pm}7.38^{\circ})$로 측정되었으며, 측방과로경사각은 $10.97^{\circ}({\pm}5.63^{\circ})$와 $12.03^{\circ}({\pm}5.22^{\circ})$로 측정되었다. 결론:두 방법 모두 남녀간 좌우간 유의적 차이는 나타나지 않았으며 두 방법 사이에서는 측방시상과로각에서 ARCUSdigma 2를 사용하여 측정한 값이 Checkbite를 사용하여 측정한 값보다 통계적으로 유의하게 작게 측정되었다(P<.05).

• 대한치과보철학회지
• /
• 제46권4호
• /
• pp.420-430
• /
• 2008

연구목적: 기존의 교합기들은 서양인의 악안면구조와 하악운동 평균치에 맞추어 제작되어 있다. 이에 현재 임상교육에 널리 사용하고 있는 반조절성 교합기 (KaVo PROTAR, Hanau Modular)를 한국인에게 적용함에 있어서 적절한 기준을 구하고자 이번 연구를 시행하였다. 연구방법: $24{\sim}41$세 한국인 성인 59명 (남41명, 여18명)을 선정하였다. 피검자 일인당 두쌍의 상하악 모형을 제작, KaVo PROTARevo 7과 Hanau Modular 반조절성교합기에 facebow transfer하여 교합기에 부착 후 전방시상과로각, 교합평면경사도, 교합기 상의 하악의 위치를 계측하였다. 연구성적: 1. 평균 전방시상과로각은 KaVo PROTAR 반조절성 교합기상에서 $33.75^{\circ}$(표준편차 $12.46^{\circ}$)였고, Hanau Modular 반조절성 교합기상에서 $40.72^{\circ}$(표준편차 $12.09^{\circ}$)였다. 2. 평균 교합평면경사각은 KaVo PROTAR 반조절성 교합기상에서 $-2.76^{\circ}$(표준편차 $3.63^{\circ}$)였고, Hanau Modular 반조절성 교합기상에서 $11.87^{\circ}$(표준편차 $3.63^{\circ}$)였다. 3. 하악치열의 중심은 교합기의 중심에서 평균 $5{\sim}7$ mm 범위내에 있었으며 KaVo PROTAR 반조절성 교합기에서는 전치부와 구치부 모두 교합기의 상하적 위치관계에서 중앙에 위치하였고, Hanau Modular 반조절성 교합기에서는 교합기의 중앙높이에서 전치부는 하방 5 mm, 구치부는 상방 3 mm에 위치하였다.

• The Journal of Advanced Prosthodontics
• /
• 제15권1호
• /
• pp.11-21
• /
• 2023

PURPOSE. To compare the sagittal condylar inclination (SCI) in dentate individuals measured by the different methods with mechanical articulator (MA), virtual articulator (VA), and a jaw tracking device (JTD) system. MATERIALS AND METHODS. A total of 22 healthy dentate participants were enrolled in this study. For MA workflow, the SCI was obtained by a semi-adjustable articulator with protrusive interocclusal records. The SCI was also set on a VA by aligning intraoral scan (IOS) with cone beam computed tomography (CBCT) and facial scan (FS), respectively. These virtual workflows were conducted in a dental design software, namely VAI_OS-CBCT and VAI_OS-FS. Meanwhile, a JTD system was also utilized to perform the measurement. Intraclass correlation was used to assess the repeatability within workflows. The bilateral SCI values were compared by Wilcoxon matched-pairs signed rank test for each workflow, and Kruskal-Wallis test and post hoc p-value Bonferroni correction were used to compare the differences among four workflows. The agreement of VAI_OS-CBCT, VAI_OS-FS, and JTD compared with MA was evaluated by Bland-Altman analysis. RESULTS. Intraclass correlation of the SCI revealed a high degree of repeatability for each workflow. There were no significant differences between the left and right sides (P > .05), except for VAI_OS-CBCT (P = .028). Significant differences were not found between MA and VAI_OS-FS (P > .05). Bland-Altman plots indicated VAI_OS-CBCT, VAI_OS-FS, and JTD were considered to substitute MA with high 95% limits of agreement. CONCLUSION. The workflow of VAI_OS-FS provided an alternative approach to measure the SCI compared with MA.