• 제목/요약/키워드: Conduit

검색결과 457건 처리시간 0.024초

기계 판막을 이용한 라스텔리 수술의 장기 성적 (Long Term Results of Rastelli Operation with a Mechanical Valve)

  • 최세훈;김관창;곽재건;김창영;이정렬;김용진;노준량;김웅한
    • Journal of Chest Surgery
    • /
    • 제39권12호
    • /
    • pp.900-905
    • /
    • 2006
  • 배경: 선천성 심장병에서 라스텔리 수술은 일반적으로 동종 혹은 이종의 조직판막을 이용하게 되며 이 경우 장기적으로 재수술이 요구된다. 반면 기계판막을 이용하여 라스텔리 수술은 보고가 많지 않으며 이번 연구는 이들 환자에서의 장기 성적을 알아보고자 하였다. 대상 및 방법: 1990년 1월부터 1992년 7월까지 기계판막을 이용한 라스텔리 수술을 받은 20명의 환자 중 조기 사망 1명을 제외한 19명의 환자를 대상으로 하였다. 기저질환으로는 교정된 대혈관전위증 4예, 대혈관전위증 2예, 심실중격결손을 동반한 폐동맥폐쇄증 9예, 총동맥간 2예, 양대혈관우심실기시증에 동반된 폐동맥협착증 2예였다. 수술 당시의 평균 연령은 $4.6{\pm}3.4$년이며, 남녀비는 1.11:1이었다. 사용한 판막으로는 Carbomedics 16예, Bjork-Shiley 3예였으며 평균 크기는 $17{\pm}2mm$였다. 평균 추적관찰 기간은 $12.8{\pm}2.7$년이었다. 결과: 19명 중 15명은 판막 도관에 대한 재수술을 받았으며, 재수술까지의 평균 기간은 $5.3{\pm}4.7$년이었다. 재수술 시에는 전부 조직판막을 사용하였다. 5 yr freedom from reoperation은 53%, 10 yr freedom from reoperation은 37%였다. 항응고 치료는 와파린과 아스피린, 다이피리다몰을 사용하였으며 PT INR수준은 1.5에서 2.0으로 유지하였고, 심각한 수준의 출혈성 부작용이나 색전에 의한 부작용은 발생하지 않았다. 술 후 3년을 기준으로 이전과 이후의 판막도관의 실패원인에서 차이를 보였다. 3년 이전에 재수술을 받은 환자군(총 6예)을 분석하였을 때, 전부에서 판막 자체의 움직임에 제한이 있었으며, 그 중 3예에서는 혈전에 의한 움직임 장애, 3예에서는 pannus 또는 fibromyxoid plaque에 의한 움직임 장애였다. 반면, 3년 이후에 재수술을 시행받은 9예에서는 1예를 제외하고 전부에서 도관 협착이 있었으며 판막 움직임은 정상이었다. 결론: 기계판막을 이용하여 라스텔리 수술의 경우 장기 성적을 좋게 하기 위해서 초기에는 엄격한 항응고 치료가 요구되며 장기적으로는 도관재질의 개선을 요구된다. 일부 환자에서는 10년 이상 특별한 문제없이 사용이 가능하였다.

심외도관 협착 환자에서 자가조직을 이용한 재수술(Peel 수술); 조기 및 중기성적 (Replacement of Obstructed Extracardiac Conduits with Autologous Tissue Reconstructions (Peel operation); Early and Midterm Results)

  • 성시찬;장윤희;이충원;박진수;이형두;반지은;추기석
    • Journal of Chest Surgery
    • /
    • 제40권3호
    • /
    • pp.193-199
    • /
    • 2007
  • 배경: 저자들은 라스텔리 수술(Rastelli operation) 후 도관협착을 해결하기 위해 협착된 도관을 제거한 후 그 후벽을 자가조직으로 이용하고 판막을 삽입한 후 전벽을 인공 첩포로 덮는 peel 수술을 시행하여 왔다. 이 수술의 결과를 후향적으로 조사하였다. 대상 및 방법: 2002년 5월부터 2006년 7월까지 모두 9명의 심외도관 협착 환자에서 peel 수술을 시행하였다. 라스텔리 수술 후 평균 $5.1{\pm}1.7$년 후 재수술을 하게 되었으며 peel 수술 시 환아의 평균 나이는 $7.5{\pm}2.4$년(범위: $2.9{\sim}10.1$년)이었다. 진단명은 심실중격결손을 동반한 폐동맥 폐쇄증이 6예, 총동맥간이 2예, 완전 대혈관 전위가 1예였다. 술 전 평균 우심실유출로 압력차는 $88.3{\pm}22.2mmHg\;(58{\sim}125mmHg$)였다. 1예에서는 단엽 우심실유출로 첩포(monocusp ventricular outflow patch, MVOP)를 이용하였고 나머지 8예에서는 조직판막(bioprosthetic valve)을 삽입하였다. 모든 예에서 대동맥차단은 하지 않았으며 평균 체외순환시간은 154 ($133{\sim}181$분)이었다. 수술 후 평균 추적기간은 20개월($1{\sim}51$개월)이었으며 3-D CT로 우심실유출로의 상태를 관찰하였다. 결과: 수술사망과 만기사망은 없었다. 술 후 퇴원 시 우심실유출로 평균 압력차이는 $20.4mmHg\;(0{\sim}29.6mmHg$)였다. peel 수술 후 재수술은 없었으며 최근 초음파 검사에서 우심실 압력차이 (n=7, 최소 1년 이상 추적)는 26 mmHg ($13{\sim}36mmHg$)으로 약간의 상승은 있었으나 MVOP를 사용한 1예를 제외한 전 예에서 폐동맥판 폐쇄부전은 없었다. 3-D CT검사상 우심실유출로의 수축, 혈전형성, 가성동맥류의 증거는 발견하지 못하였고 우심실유출로의 통로가 잘 유지되고 있었다. 결론: peel 수술은 라스텔리 수술 후 도관협착을 해결할 수 있는 안전하고 효과적인 수술법으로 생각한다.

Rastelli씨 수술법을 이용한 완전 대혈관전위증(S. D. D.) -치험 1예- (Successful Surgical Correction of Complete Transposition of Great Arteries (S.D.D.) : 1 Case Report)

  • 강면식;조범구
    • Journal of Chest Surgery
    • /
    • 제13권4호
    • /
    • pp.442-447
    • /
    • 1980
  • A 8-year-old boy underwent surgical correction of complete transposition S.D.D. of great arteries combined with subaortic ventricular septal defect and pulmonary stenosis [infundibular and valvular]. The operation consisted of an internal baffling connecting the left ventricle to the aorta through the ventricular septal defect. The pulmonary stenosis was corrected with the method of external connection, the right ventricle to the pulmonary artery using the conduit valve [20 mm] contained Hancock due to abnormal distribution of left coronary artery of which conduit due to abnormal distribution of left coronary artery of which the circumflex branch crossed the portion of right ventricular outflow tract. This case was suitable for corrective surgery-Rastelli operation-and the patient`s condition in very good until present [post-operative 5 months].

  • PDF

Comparisons of internal self-field magnetic flux densities between recent Nb3Sn fusion magnet CICC cable designs

  • Kwon, S.P.
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제18권3호
    • /
    • pp.10-20
    • /
    • 2016
  • The Cable-In-Conduit-Conductor (CICC) for the ITER tokamak Central Solenoid (CS) has undergone design change since the first prototype conductor sample was tested in 2010. After tests showed that the performance of initial conductor samples degraded rapidly without stabilization, an alternate design with shorter sub-cable twist pitches was tested and discovered to satisfy performance requirements, namely that the minimum current sharing temperature ($T_{cs}$) remained above a given limit under DC bias. With consistent successful performance of ITER CS conductor CICC samples using the alternate design, an attempt is made here to revisit the internal electromagnetic properties of the CICC cable design to identify any correlation with conductor performance. Results of this study suggest that there may be a simple link between the $Nb_3Sn$ CICC internal self-field and its $T_{cs}$ performance. The study also suggests that an optimization process should exist that can further improve the performance of $Nb_3Sn$ based CICC.

$Nb_{3}$Sn 도관 케이블 도체의 굽힘변형 해석 (The analysis of bending processes in $Nb_{3}$Sn Cable-in-Conduit Conductors)

  • 남현일;이호진;박재학
    • 한국초전도저온공학회:학술대회논문집
    • /
    • 한국초전도저온공학회 2002년도 학술대회 논문집
    • /
    • pp.259-262
    • /
    • 2002
  • Cable-in-Conduit Conductors (CICC) have been used for fabrication of nuclear fusion magnets. Bending process is included in fabrication of superconducting magnet such as termination of conductors. Because of plastic deformation by bending process, there can be a large residual stress and change of shape in bent conductors. Void volume fraction in conductors is also changed by bending process. In this study, Commercial code was used to analyze the bending process at various bending curvature radius. The calculated residual stress of conductors bent at less than about 40cm curvature radius exceeded the allowable stress.

  • PDF

Heart Transplantation in a Patient with Persistent Left Superior Vena Cava

  • Lee, Jae-Hong;Park, Eun-Ah;Lee, Whal;Cho, Hyun-Jai;Kim, Ki-Bong;Hwang, Ho Young
    • Journal of Chest Surgery
    • /
    • 제47권6호
    • /
    • pp.533-535
    • /
    • 2014
  • A 56-year-old male presented with severe exertional dyspnea and pitting edema in the lower extremities. The preoperative evaluation demonstrated biventricular dysfunction associated with severe tricuspid valve regurgitation and a persistent left superior vena cava. He was registered as a transplantation candidate, and orthotopic heart transplantation was performed using the standard bicaval technique. The left superior vena cava was connected to the right atrial appendage after the construction of a conduit using the recipient's autologous coronary sinus tissue. One-month postoperatively, computed tomography imagery demonstrated a patent conduit between the left superior vena cava and right atrial appendage.

Fontan Revision with Y-Graft in a Patient with Unilateral Pulmonary Arteriovenous Malformation

  • Lee, Jeong-woo;Park, Jeong-Jun;Goo, Hyun Woo;Ko, Jae Kon
    • Journal of Chest Surgery
    • /
    • 제50권3호
    • /
    • pp.207-210
    • /
    • 2017
  • The extracardiac conduit Fontan procedure is the last surgical step in the treatment of patients with a functional single ventricle. An acquired pulmonary arteriovenous malformation may appear perioperatively or postoperatively due to an uneven hepatic flow distribution. Here we report a case of a bifurcated Y-graft Fontan operation in a 15-year-old male patient with a unilateral pulmonary arteriovenous malformation after an extracardiac conduit Fontan operation.

OPTIMAL DESIGN MODEL FOR A DISTRIBUTED HIERARCHICAL NETWORK WITH FIXED-CHARGED FACILITIES

  • Yoon, Moon-Gil;Baek, Young-Ho;Tcha, Dong-Wan
    • Management Science and Financial Engineering
    • /
    • 제6권2호
    • /
    • pp.29-45
    • /
    • 2000
  • We consider the design of a two-level telecommunication network having logical full-mesh/star topology, with the implementation of conduit systems taken together. The design problem is then viewed as consisting of three subproblems: locating hub facilities, placing a conduit network, and installing cables therein to configure the logical full-mesh/star network. Without partitioning into subproblems as done in the conventional approach, the whole problem is directly dealt with in a single integrated framework, inspired by some recent successes with the approach. We successfully formulate the problem as a variant of the classical multicommodity flow model for the fixed charge network design problem, aided by network augmentation, judicious commodity definition, and some flow restrictions. With our optimal model, we solve some randomly generated sample problems by using CPLEX MIP program. From the computational experiments, it seems that our model can be applied to the practical problem effectively.

  • PDF