• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.43-46
• /
• 2009

The purpose of this study is to enhance durability of concrete structures that uses this surface protecting material by carrying out the performance test of the surface protecting material of concrete, and as s result, we reached out the conclusion as follow. 1. As a result of the test measuring the stability and adhesive power of conductive film against ultraviolet, freezing & thawing, and damage from seawater that deteriorate the surface protecting material, it was turned out to meet the performance criteria specifying in the KS standard enough to gain a good evaluation to use as a surface protecting material. 2. As a result of the test identifying the neutralization-furtherance, it was assessed to be capable of protecting effectively concrete structures from carbonic acid gas by a very low depth of 0.1mm of neutralization. 3. As a result of the test identifying Penetrated Resistance Properties of chloride ion, as it was turned out to have a very low value of 819 Coulombs, it was assessed that even in the environment where the corrosion by chloride such sea environment is very affective, the film can effectively protect the concrete structure. 4. As a result of the test identifying freezing & thawing, as there was no change in reduction of mass after 400 cycle, it was assessed that the film has a good resistance against freezing & thawing. According to the results of study above, it is expected that this technology can extend its durability of concrete structure and be widely used for concrete structure through means (methods) to prevent the neutralization and damage from seawater as original purposes of the surface protecting material.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.73-82
• /
• 2004

A thermal transfer method was developed novel method to form the phosphor screen for monochrom VPT. This method have advantages of simple process, clean environment, saving raw material and running-cost. But now applying phosphor screen for thermal transfer method has been formed three layers (phosphor layer, ITO layer and thermal adhesive layer) on the PET film as substrate. This is complex process, consumption of raw-material and require of high cost. Also ITO paste at present has been imported from Japan. To improve these problems, we have developed ITO paste as conductive paste by using ITO sol and binder resin (AA3003). Ito paste as developed in this study has both conductive and excellent thermal transfer abilities. Thus we could manufacture phosphor screen formed two layers (phosphor layer and ITO layer).

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.161-166
• /
• 2001

The prototype of a tactile sensor with $4\times 4$ taxels using PVDF was fabricated. The electrode patterns of the thin Cu tape are attached to the 28${\mu}{\textrm}{m}$ thickness PVDF using conductive adhesive and covering the sensor using polyester film for insulation. The structure of the sensor is flexible and the fabrication procedure is easy relatively. Also the output characteristics of the sensor was nearly linear with 8% deviation. The signals of a contact pressure to the tactile sensor are sensed and processed through A/D converter, DSP system and personal computer. The reasonable performance for the detection of contact shape and force distribution was verified through the experiment.

• 한국인쇄학회:학술대회논문집
• /
• 한국인쇄학회 2007년도 추계 학술논문 발표회
• /
• pp.59-64
• /
• 2007

We have manufactured low-curable silver pastes for gravure printing out of roll to roll printing process. When printing, the pastes be used different silver powder shape because of the printing characteristics. The pastes were prepared with silver powder by silver powder shape, polyester resin, solvent and homogenized on a standard three-roller mill. And the pastes exhibited a shear-thinning flow at viscosity profile. Moreover the adhesive strength and resistivity of silver film had good characteristics. With the manufactured paste in this study, RFID antenna circuit had flexible is manufactured and it had $10^{-4}{\sim}10^{-5}{\Omega}{\cdot}cm$.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.593-594
• /
• 2006

A novel thermal transfer method was developed to form the phosphor screen for VPT(Video Phone Tube). This method have advantages of simple process, clean environment, saving raw material and running-cost comparison of electrodeposition, spin coating of conventional methods. But now applying phosphor screen for thermal transfer method has been formed three layers (phosphor layer, ITO layer and thermal adhesive layer) on the PET film as substrate. This is complex process, run to waste of raw-material and require of high cost. Also ITO paste at present has been imported from Japan. To improve these problems, we have manufactured phosphor screen formed by two layers (phosphor layer and ITO layer). We have developed ITO paste that had both conductive and excellent thermal transfer abilities, made it of domestic raw-material.

• 동력기계공학회지
• /
• 제22권1호
• /
• pp.64-71
• /
• 2018

Currently, functional patterns are formed by screen printing on stretchable films, and they are applied to wearable and stretchable devices. In this study, three types of silver paste were prepared using three polyester binders with different Tg and molecular weights in order to impart elasticity to the conductive pattern itself. Rheological properties and DSC measurements were performed for each silver paste. Then, each silver paste was screen printing and cured by an IR dryer to evaluate adhesive strength, pencil hardness, resistance and surface shape change according to strain. As a result, it was found that the silver paste using a binder with a low Tg and a high molecular weight has the smallest resistance change depending on the strain. Namely, it was found that it is most preferable to use a binder with a low Tg and a high molecular weight as the stretchable electrode.

• 한국인터넷방송통신학회논문지
• /
• 제12권5호
• /
• pp.91-97
• /
• 2012

근래의 전기 전자 제품은 기능은 향상되는 반면 크기는 소형화되는 추세에 있다. 기존 입체 형태의 음향 신호 재생 장치로서의 엑츄에이터 대신 압전 소자를 이용한 스피커가 개발되기 시작하였다. 압전 소자는 압전 특성을 갖는 물질로서 물체의 외부에서 전압을 가할 때 기계적인 변형을 일으키는 특징(즉 피에조 특징)을 이용한다. 초기의 필름 스피커는 화학적 성질의 한계로 인하여 전도성 고분자 막을 형성하기 힘들다는 한계가 있었고, 도포한 두께를 균일하게 유지하기 힘들었으며, 음향 신호의 출력과 동작 주파수의 한계가 있다는 등의 종래 기술의 문제점을 해결하기 위해, 전도 물질과 피에조 물질(필름)의 결합력을 증가시킴으로써 전도체의 저항을 줄이고 주파수 영역을 확장하고자 한다. 피에조 필름의 표면 접착력을 향상시키고, 고분자 전도체 막의 흡착력을 증가시킴으로써 음향시스템의 출력 향상을 위해 코로나 표면처리방식에 의한 표면 특징을 변화시킴으로써 출력개선을 하였다.

• 한국표면공학회지
• /
• 제48권2호
• /
• pp.33-37
• /
• 2015

High efficiency LED device is being concerned due to its high heat loss, and such heat loss will cause a shorter lifespan and lower efficiency. Since there is a demand for the materials that can release heat quickly into the external air, the organic insulating layer was required to be replaced with high thermal conductive materials such as metal or ceramics. Through anodizing the upper layer of Al, the Breakdown Voltage of 3kV was obtained by using an uniform thickness of $60{\mu}M$ aluminum oxide($Al_2O_3$) and was carried out to determine the optimum process conditions when thermal cracking does not occur. Two Ni layers were formed above the layer of $Al_2O_3$ by sputtering deposition and electroplating process, and saccharin was added for the purpose of minimizing the remain stress in electroplating process. The results presented that the 3-layer film including the Ni layer has an adhesive force of 10N and the thermal conductivity for heat dissipation is achieved by 150W/mK level, and leads to improvement about 7 times or above in thermal conductivity, as opposed to the organic insulation layer.

• Composites Research
• /
• 제30권2호
• /
• pp.138-144
• /
• 2017

탄소나노튜브(CNT)를 이용하여 신율이 뛰어난 p-DCPD를 지로 사용하여 손상감지용 고분자 필름 센서를 연구하였다. CNT를 수지에 혼합시킬 경우 중합을 방해하여 1차 개환만 진행되었다. CNT 농도에 따른 정적접 촉각을 측정하여 계면의 젖음성을 측정하였다. 높은 신율을 가지는 p-DCPD에 CNT를 혼합시킴으로써 전도성을 확보하였고, CNT 농도에 따른 인장강도 및 전기저항 분산도 평가를 실시하였을 경우 0.5 wt% CNT/p-DCPD 조건이 최적의 조건임을 확인하였다. CNT/p-DCPD 센서의 내구성을 평가하기 위해 동적 피로 실험을 실시하여 인장응력에 따른 전기저항 변화를 평가하였다. 초기 3회 사이클 동안은 전기저항 변화도와 응력간의 결과가 유사한 경향을 나타내었다. CNT/p-DCPD 센서의 활용을 위해 에폭시 기지 표면에 센서를 붙이고 기지 재료의 파괴거동을 확인하였다. 기지 파괴가 발생되기 전에 CNT/p-DCPD 센서의 전기저항 점핑 신호를 관찰할 수 있었다. 이는 기지재료에 발생된 균열에 의해 CNT/p-DCPD 센서와 기지간의 접착 파괴로 발생된 신호이며, 이러한 신호를 이용하여 기지재료의 균열 및 파괴를 예측해 볼 수 있었다.