• 유체기계공업학회:학술대회논문집
• /
• 2000.12a
• /
• pp.351-358
• /
• 2000

In a small centrifugal compressor system, a high-speed motor needs to be developed to drive impellers directly. Heat is generated by both electrical heating due to copper coil resistance and aerodynamic heating in the gap between the rotor and stator in a high-speed motor. Removal of the heat is essential to the design of such motors since most magnetic materials are brittle and can be easily fractured by the heat. In the present study the cooling flow fields and temperature distributions were analyzed by using computational fluid dynamics simulation for a high-speed motor which has air cooling system as well as water cooling system. In the analysis a conjugate heat transfer problem is solved by considering both convective heat transfer in the cooling system and conduction heat transfer in solid parts. Based on design drawings of a motor, air cooling system and water cooling system were analyzed to obtain temperature field and thus to check the coiling system performance. Also the cooling performance are studied for various flow rates of cooling air and water at the inlets.

• Journal of the Korean Chemical Society
• /
• v.30 no.6
• /
• pp.500-509
• /
• 1986

For the development of new type cell, a study on new electrolyte, $AgI-Ag_8S_3SO_4$ system has been carried out by using electrical conductivity measurement, DTA and X-ray powder diffraction method. From both X-ray powder diffraction and DTA method, it is clearly known that 20mole% $ Ag_8S_3SO_4$-AgI system forms single phase, having monoclinic structure. It is also found that 20mole% $Ag_8S_3SO_4$-AgI system is purely $ Ag^+ $cation conduction from results of conductivity measurement by applying 4-probe method.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.1
• /
• pp.20-24
• /
• 2009

The superconducting property measurement system is used to acquire electrical and thermal properties on short HTS tape samples and the system is composed of specimen holder for mounting HTS tape and a magnet for applying magnetic fields externally. The magnet consists of two split racetrack windings and is designed to produce maximum 3T of center field. The temperature of specimen holder can be varied in range from 10K to 77K. The field homogeneity is required less than 300 gauss stray field contour within 20cm axially and 3cm radially from origin. We have worked on the conceptual designs of the conduction-cooled magnet for the superconducting characteristic measurement system. The measurement system will be fabricated in near future based on the design parameters presented in this paper.

• Animal cells and systems
• /
• v.2 no.1
• /
• pp.71-80
• /
• 1998

Glutamate dehydrogenase (GDH) is one of the main enzymes involved in the formation and metabolism of the neurotransmitter glutamate. In the present study, we investigated the distribution of the GDH-immunoreactive cells in the rat brain using monoclonal antibodies against bovine brain GDH isoprotein. GDH-immunoreactive cell were distributed in the basal ganglia, thalamus and the nuclei belong to substantia innominata, and its connecting area, subthalamic nucleus, zona incerta, and substantia niqra. We could see GDH-immunoreactive cells in the hippocampus, septal nuclei associated with the limbic system, the anterior thalamic nuclei connecting between the hypothalamus and limbic system, and its associated structures, amygdaloid nuclear complex, the dorsal raphe and median raphe nuclei and the reticular formation of the midbrain. The GDH-immunoreactive cells were shown in the pyramidal neurons of the cerebral cortex, the Purkinie cells of the cerebella cortex, their associated structures, ventral thalamic nuclei and the reticular thalamic nuclei that seem to function as neural conduction in the thalamus.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.5 no.4
• /
• pp.35-42
• /
• 1991

Recently, HID lamps have been considered as important in regard to the trend of energy saving, and increasingly and diversely used in various ways. This paper will show the simulating models concerning high-pressure arc discharge system directly applicable for its design and manufacture, and analyze its various characteristics. For warm-up characteristics, the evaporating process of inner atoms is described in terms of second-order differential equation: for the thermal conduction from are axis to discharge wall and outer bulb, its transfer process is introduced according to five first-order differential equations. Under the steady state satisfying LTE, the time-variant characteristics are suggested by means of time-dependent energy balance equation derived from fluid equations, approximation of radiation energy and material functions in the discharge tube. The simulating models concerning these equations are then applied for high-pressure mercury lamp.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.27-40
• /
• 1997

The heat in Czochralski method is transfered by all transport mechanisms such as convection, conduction and radiation and convection is caused by the temperature difference in the molden pool, the rotations of crystal or crucible and the difference of surface tension. This study delvelops the simulation model of Czochralski growth by using the finite difference method with fixed grids combined with new latent heat treatment model. The radiative heat transfer occured in the surfce of the system is treated by calculating the view factors among surface elements. The model shows that the flow is turbulent, therefore, turbulent modeling must be used to simulate the transport phenomena in the real system applied to 8" Si single crystal growth process. The effects of a cusp magnetic field imposed on the Czochralski silicon melt are studied by numerical analysis. The cusp magnetic field reduces the natural and forced convection due to the rotation of crystal and crucible very effectively. It is shown that the oxygen concentration distribution on the melt/crystal interface is sensitively controlled by the change of the magnetic field intensity. This provides an interesting way to tune the desired O concentration in the crystal during the crystal growing.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.20-23
• /
• 2006

Geothermal energy is the natural heat of the Earth. Enormous amounts of thermal energy are continuously generated by the decay of radioactive isotopes of underground rocks and stored in the Earth's interior. Therefore, geothermal energy is one of the most important sustainable energy resources. Recent trends of geothermal energy exploitation technologies focus on the Earth scientific approach to geothermal heat pump system, enhanced geothermal system, aquifer thermal energy storage, underground thermal energy storage, and fluid/heat flow model ing for geothermal wells. Geothermal heat pump distribution in Korea is still in its starting phase in terms of areal utilization sense, we, however, expect to come up with national supply of over 1,000,000 toe by 2020

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.129-135
• /
• 2002

The present article deals with the measurement and the numerical calculations far the temperature distribution near the facing of the lockup clutch. The rotating telemetry system is Introduced for the estimation inside high-speed torque converter For the numerical calculation, the effect of the convective heat transfer is considered as well as the conduction to the solid. The estimation shows that the oil temperature near facing rapidly rises as the lockup clutch is engaged. The numerical results shows good agreements with the experimental values for the maximum temperature near the facing of the lockup clutch.

• Proceedings of the KOSOMBE Conference
• /
• v.1995 no.11
• /
• pp.205-208
• /
• 1995

Analysis of Heart Rate Variability has been studied to estimate autonomic nervous system. PR interval represents conduction time from atrium to ventricle. PR interval variability(PRV) is also can be used to estimate autonomic nervous system. We have acquired two-state ECGs of children who are before vagal stimulation and after vagal stimulation. We applied chaotic theory to each ECG in order to analyze PRV, and compared the results from frequency domain analysis. The correlation dimension of PRV of pre-stimulated children is higher than that of post-stimulated children.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.587-590
• /
• 2000

The new core making method economized on core sand requested. The new method is heating core box until it reaches reasonable temperature and then spraying core sand with core binder into core box. Inner temperature distribution have to uniform in order to form core of uniform thickness. Therefore, in this study we treat of inner temperature distribution of core box in priority. First, determine proper torch number. Next, optimize the torch position to minimize the average of absolute deviation(AVEDEV) of inner temperature. The results are as followed : 1. The torch number that makes inner temperature distribution about $300^\circ{C}$ uniformly is 25. 2. When $S_H$ and $S_V$ is 0.7, the torch position is optimized and AVEDEV is 5.85.