• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.2
• /
• pp.87-94
• /
• 2012

A damage estimation method of wind turbine tower using natural frequency and mode shape is presented for effective condition monitoring. Dynamic analysis for a wind turbine was carried out to obtain the response of tower from which modal properties were identified. A neural network was learned based on training patterns generated by the changes of natural frequency and mode shape due to various damages. The changes of modal property were calculated using a program for modal parameter estimation. Damage locations and severities could be successfully estimated for 10 damage cases including multi-damage cases using the trained neural network. The damage severities for very small damages generally tends to be slightly under-estimated however, the identified damage locations agreed reasonably well with the accurate locations. Enhancement of the estimation result for very small damage and verification of the proposed method through experiment will be carried out by further study.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.405-409
• /
• 2018

최근 기후변화로 인해 기온, 강수량 등 농업에 직접적인 영향을 주는 환경요인의 변화가 급격하게 진행되고 있으며, 식량농업기구 (Food and Agriculture Organization of the United Nations, FAO)는 기후변화로 인해 전 세계적인 식량위기가 발생할 가능성이 크다고 경고하고 있다. 농업 시스템의 생산 능력을 확보하기 위해 수자원의 효율적인 공급 및 분배, 수확량 예측, 토지 특성 파악 등 농업 생산 제한요소에 대한 빠른 정보수집이 요구되고 있다. 재해관리 분야에서 원격탐사 기술은 재해 발생을 인지하고 발생지역의 재해 진행과 피해 정도를 신속하게 제공할 수 있다는 점에서 효용성이 높다. 또한 위성 영상을 이용할 경우 접근이 용이하지 못한 지역의 조사가 수월하며, 장기적인 변화관측이나 환경감시 등 광역적 접근이 가능하다. 최근 위성영상을 통한 다양한 신호의 데이터 취득 및 가공이 가능하게 됨에 따라 주기적이고 동일한 정확도로 지상자료의 획득이 가능하다는 측면에서 인공위성을 활용한 농업 분야에서의 가뭄 분석 연구의 필요성이 대두되었다. 위성영상 신호를 통해 농업 가뭄에 활용되고 있는 지표로는 정규식생지수 (Normalized Difference Vegetation Index, NDVI) 및 식생상태지수 (Vegetation Condition Index, VCI), 식생가뭄반응지수(Vegetation Drought Response Index, VegDRI) 등이 있다. 잠재 증발산과 실제 증발산의 비를 이용한 위성영상기반의 가뭄지수인 Evaporative Stress Index (ESI)는 일반적으로 사용되는 가뭄지수인 표준강수지수(Standardized Precipitation Index, SPI), 파머가뭄심도지수 (Palmer Drought Severity Index, PDSI) 등과 비교하였을 때, 가뭄에 더 민감하고 빠른 반응을 보인다는 연구 결과로부터 짧은 기간의 급속하게 발생하는(rapid-onset) Flash drought의 가뭄판단지표로 활용되고 있다. 본 연구에서는 과거 우리나라에 발생했던 극심한 가뭄 사상을 대상으로 ESI의 가뭄분석을 통해 타 지표와의 차별성을 확인하고 농업 가뭄 모니터링의 새로운 지표로써 적용성을 검토하고자 한다.

• Steel and Composite Structures
• /
• v.33 no.3
• /
• pp.445-461
• /
• 2019

The ultrasonic guided wave-based technique has become one of the most promising methods in non-destructive evaluation and structural health monitoring, because of its advantages of large area inspection, evaluating inaccessible areas on the structure and high sensitivity to small damage. To further advance the development of damage detection technologies using ultrasonic guided waves for the inspection of welded components in structures, the transmission characteristics of the ultrasonic guided waves propagating through welded joints with various types of defects or damage in steel plates are studied and presented in this paper. A three-dimensional (3D) finite element (FE) model considering the different material properties of the mild steel, high strength steel and austenitic stainless steel plates and their corresponding welded joints as well as the interaction condition of the steel plate and welded joint, is developed. The FE model is validated against analytical solutions and experimental results reported in the literature and is demonstrated to be capable of providing a reliable prediction on the features of ultrasonic guided wave propagating through steel plates with welded joints and interacting with defects. Mode conversion and scattering analysis of guided waves transmitted through the different types of weld defects in steel plates are performed by using the validated FE model. Parametric studies are undertaken to elucidate the effects of several basic parameters for various types of weld defects on the transmission performance of guided waves. The findings of this research can provide a better understanding of the transmission behaviour of ultrasonic guided waves propagating through welded joints with defects. The method could be used for improving the performance of guided wave damage detection methods.

• Geomechanics and Engineering
• /
• v.19 no.2
• /
• pp.153-165
• /
• 2019

A case study of monitoring and analysis of surface settlement induced by tunneling of Tabriz metro line 2 (TML2) is presented in this paper. The TML2 single tunnel has been excavated using earth pressure balanced TBM with a cutting-wheel diameter of 9.49 m since 2015. Presented measurements of surface settlements, were collected during the construction of western part of the project (between west depot and S02 station) where the tunnel was being excavated in sand and silt, below the water table and at an average axis depth of about 16 m. Settlement readings were back-analyzed using Gaussian formula, both in longitudinal and transversal directions, in order to estimate volume loss and settlement trough width factor. In addition to settlements, face support and tail grouting pressures were monitored, providing a comprehensive description of the EPB performance. Using the gap model, volume loss prediction was carried out. Also, COB empirical method for determination of the face pressure was employed in order to compare with field monitored data. Likewise, FE simulation was used in various sections employing the code Simulia ABAQUS, to investigate the efficiency of numerical modelling for the estimating of the tunneling induced-surface settlements under such a geotechnical condition. In this regard, the main aspects of a mechanized excavation were simulated. For the studied sections, numerical simulation is not capable of reproducing the high values of in-situ-measured surface settlements, applying Mohr-Coulomb constitutive law for soil. Based on results, for the mentioned case study, the range of estimated volume loss mostly varies from 0.2% to 0.7%, having an average value of 0.45%.

• Safety and Health at Work
• /
• v.12 no.3
• /
• pp.370-376
• /
• 2021

Backround: Working condition surveys are widely recognized as useful tools for monitoring the quality of working life and the improvements introduced by health and safety policy frameworks at the European and national level. The Italian Workers' Compensation Authority carried out a national survey (Insula) to investigate the employer's perceptions related to working conditions and their impact on health. Methods: The present study is based on the data collected from the Italian survey on health and safety at work (INSULA) conducted on a representative sample of the Italian workforce (n = 8,000). This focuses on the relationship between psychosocial risk factors and self-reported health using a set of logistic and linear regression models. Results: Working conditions such as managerial support, job satisfaction, and role act as protective factors on mental and physical health. On the contrary, workers' risk perceptions related to personal exposure to occupational safety and health risks, concern about health conditions, and work-related stress risk exposure determine a poorer state of health. Conclusions: This study highlights the link between working conditions and self-report health, and this aims to provide a contribution in the field of health at work. Findings show that working conditions must be object of specific preventive measures to improve the workers' health and well-being.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.97-106
• /
• 2019

Today, many smart sensor's measurement instruments are used to check the safety situation of various medium and large bridge structures that should be maintained in the construction facilities, but most of them use the method of measuring and confirming the displacement behavior of the bridge at regular intervals. In order to continuously check the safety situation, various measuring instruments are used, but most of them are not able to measure and measure the displacement and behavior of main construction structures at regular intervals. In this study, GNSS and environment smart sensors and drone's image data are transmitted to wireless network so that risk of many bridge's structures can be detected beforehand. As a result, by diagnosing the fine displacement of the bridge in real time and its condition, reinforcement, repair and disaster prevention measures for the structural parts of the bridges, which are expected to be dangerous, and various disasters and accidents can be prevented, and disaster can be prevented could suggest a new alternative.

• Investigative Magnetic Resonance Imaging
• /
• v.23 no.2
• /
• pp.100-113
• /
• 2019

Sarcoidosis is a multisystem disease characterized by noncaseating granulomas. Cardiac involvement is known to have poor prognosis because it can manifest as a serious condition such as the conduction abnormality, heart failure, ventricular arrhythmia, or sudden cardiac death. Although early diagnosis and early treatment is critical to improve patient prognosis, the diagnosis of CS is challenging in most cases. Diagnosis usually relies on endomyocardial biopsy (EMB), but its diagnostic yield is low due to the incidence of patchy myocardial involvement. Guidelines for the diagnosis of CS recommend a combination of clinical, electrocardiographic, and imaging findings from various modalities, if EMB cannot confirm the diagnosis. Especially, the role of advanced imaging such as cardiac magnetic resonance (CMR) imaging and positron emission tomography (PET), has shown to be important not only for the diagnosis, but also for monitoring treatment response and prognostication. CMR can evaluate cardiac function and fibrotic scar with good specificity. Late gadolinium enhancement (LGE) in CMR shows a distinctive enhancement pattern for each disease, which may be useful for differential diagnosis of CS from other similar diseases. Effectively, T1 or T2 mapping techniques can be also used for early recognition of CS. In the meantime, PET can detect and quantify metabolic activity and can be used to monitor treatment response. Recently, the use of a hybrid CMR-PET has introduced to allow identify patients with active CS with excellent co-localization and better diagnostic accuracy than CMR or PET alone. However, CS may show various findings with a wide spectrum, therefore, radiologists should consider the possible differential diagnosis of CS including myocarditis, dilated cardiomyopathy (DCM), hypertrophic cardiomyopathy, amyloidosis, and arrhythmogenic right ventricular cardiomyopathy. Radiologists should recognize the differences in various diseases that show the characteristics of mimicking CS, and try to get an accurate diagnosis of CS.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.4
• /
• pp.443-449
• /
• 2019

To protect the patient's internal organs when a patient with cardiovascular disease occurs, it is important to reduce the elapsed time by providing emergency medical services. Decisions for conducting cardiopulmonary resuscitation are mainly made using the carotid palpation method, which directs the pulse of the carotid artery, which can diagnose the patient's condition according to one's own subject and cause cerebral blood flow to be blocked by excessive pressure in the carotid due to the weaken cardiopulmonary function. In this study, we developed a multimodal patch-type probe based on multi-channel ultrasound Doppler pairs and oxygen saturation measurement modules which can monitor cardiopulmonary functions. From the in-vivo experiments, the developed probe can be utilized as a novel tool that can increase the survival rate of cardiovascular disease patients by objectively monitoring the cardiopulmonary function of the patient quantitatively and promptly in an emergency situation.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.2
• /
• pp.193-198
• /
• 2021

The purpose of spinal dural arteriovenous fistula (SDAVF) ligation is to prevent neurological injury and the poor blood supply through ligation of arteriovenous fistula. Therefore, intraoperative neurophysiological monitoring (INM) is required via multimodal neurological examination for minimizing the side effects after surgery based on the patient's symptoms. Transcranial electric motor-evoked potentials (TceMEP) help to check the condition of the corticospinal tract. Whenever ligation is performed, TceMEP should be performed every minute to check for abnormalities. However, an examiner's lack of knowledge about the operation procedure and examination and also poor communication between the examiner and surgeon can cause incorrect timing of the stimulation of TceMEP that interferes with the procedure and causes side effects such as paralysis and motor weakness. As a result of this SDAVF ligation survey, it is believed that for proper INM, case reports will be needed along with further research and the examiner will also have to work closely with the surgeon to minimize neurological damage to patients.

• Health Policy and Management
• /
• v.4 no.1
• /
• pp.138-175
• /
• 1994

The objectives of this study are (i) to review current situations and problems of the occupational health care system with emphasis on reforming the organizations and services, (ii) to find out a disirable occupational health system model based on integration of the occupational health system and the general health system, and finally, (iii) to suggest policy implications in occupational health services in the light of objectives of the newly emerging national health insurance reform in Korea. The major policy implications of this study are as follows: 1. In the long-run, within the occupational health system, preventive occupational health services such as employees' physical check-up, working environment examination, etc should financially be integrated with industrial accident compensation insurance. Currently separately paying expenses for each different category of services by the owner of an enterprise should be disbursed once through the payment of contributions of industrial accident compensation insurance. And then, it is necessary to strengthen and expand the role and function of industrial accident compensation insurance to cover preventive occupational health services. 2. The occupational health system should be integrated with general health system for its effective management. For the short-term policy, it is necessary to eliminate fiscal and access barrier between industrial accident compensation insurance and national health insurance by means of ex post facto settlement of accounts. The duplication of employees' physical check- ups between under the health insurance program and under the industrial health services must be coordinated in a manner either through mutual authorization by the two parties concerned or through merge into the health insurance. 3. The intent of current employees' physical check-up system focused on detection of occupational diseases, should be converted to an idea of medical surveillance system or biological moritoring system. The introduction of medical surveillance or biological monitoring system is a necessary condition to build a positive, effective and inexpensive occupational health care system.